rockbox/firmware/target/mips/ingenic_jz47xx/crt0.S

/***************************************************************************
 *             __________               __   ___.
 *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
 *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
 *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
 *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
 *                     \/            \/     \/    \/            \/
 * $Id$
 *
 * Copyright (C) 2008 by Maurus Cuelenaere
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 * KIND, either express or implied.
 *
 ****************************************************************************/

/*
 * init.S
 *
 * Initialization code for JzRISC.
 *
 * Author: Seeger Chin
 * e-mail: seeger.chin@gmail.com
 *
 * Copyright (C) 2006 Ingenic Semiconductor Inc.
 * 
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 */

#include "config.h"
#include "mips.h"

    .text
    
    .set mips3

    .extern system_main

    .global    _start
    .section .resetvectors,"ax",%progbits
    .set    noreorder
    .set    noat
    
#ifdef BOOTLOADER
    .word 0 /* HACK */
    .word 0 /* HACK */
#endif
_start:
    la      ra, _start
    //----------------------------------------------------
    // init cp0 registers.
    //----------------------------------------------------
    mtc0    zero, C0_WATCHLO
    mtc0    zero, C0_WATCHHI

    li      t0, (M_StatusBEV  | M_StatusIM7 | M_StatusIM6 \
                | M_StatusIM5 | M_StatusIM4 | M_StatusIM3 \
                | M_StatusIM2 | M_StatusERL)
             //  BEV = Enable Boot Exception Vectors
             //  IMx = Interrupt mask
             //  ERL = Denotes error level
    mtc0    t0, C0_STATUS

    li      t1, M_CauseIV
    mtc0    t1, C0_CAUSE

    //----------------------------------------------------
    // init caches, assumes a 4way*128set*32byte i/d cache
    //----------------------------------------------------
    li      t0, 3            // enable cache for kseg0 accesses
    mtc0    t0, C0_CONFIG    // CONFIG reg
    la      t0, 0x80000000   // an idx op should use a unmappable address
    ori     t1, t0, 0x4000   // 16kB cache
    mtc0    zero, C0_TAGLO   // TAGLO reg
    mtc0    zero, C0_TAGHI   // TAGHI reg

_init_cache_loop:    
    cache   0x8, 0(t0)       // index store icache tag
    cache   0x9, 0(t0)       // index store dcache tag
    bne     t0, t1, _init_cache_loop
    addiu   t0, t0, 0x20     // 32 bytes per cache line
    nop

    //----------------------------------------------------
    // Invalidate BTB
    //----------------------------------------------------
    mfc0    t0, C0_CONFIG
    nop
    ori     t0, 2
    mtc0    t0, C0_CONFIG
    nop
    
	//----------------------------------------------------
	// clear BSS section
	//----------------------------------------------------
	la	t0, _edata
	la	t1, _end
1:	sw	zero, 0(t0)
	bne	t0, t1, 1b
	addiu	t0, 4

    //----------------------------------------------------
    // setup stack, jump to C code
    //----------------------------------------------------
    la      sp, stackend
    la      t0, stackbegin
    li      t1, 0xDEADBEEF
    
_init_stack_loop:    
    sw      t1, 0(t0)
    bne     t0, sp, _init_stack_loop
    addiu   t0, t0, 4

    la      t0, system_main
    jr      t0
    nop

    
    .section .vectors,"ax",%progbits
    .extern exception_handler
    .global except_common_entry
    .type   except_common_entry,@function
except_common_entry:
    la     k0, exception_handler
    jr     k0
    nop
    nop
    nop

    .extern _int
    .extern _exception
    .global exception_handler
    .type   exception_handler,@function
    .set noreorder
exception_handler:


    addiu   sp, -0x80
    sw      ra, 0(sp)
    sw      fp, 4(sp)
    sw      gp, 8(sp)
    sw      t9, 0xC(sp)
    sw      t8, 0x10(sp)
    sw      s7, 0x14(sp)
    sw      s6, 0x18(sp)
    sw      s5, 0x1C(sp)
    sw      s4, 0x20(sp)
    sw      s3, 0x24(sp)
    sw      s2, 0x28(sp)
    sw      s1, 0x2C(sp)
    sw      s0, 0x30(sp)
    sw      t7, 0x34(sp)
    sw      t6, 0x38(sp)
    sw      t5, 0x3C(sp)
    sw      t4, 0x40(sp)
    sw      t3, 0x44(sp)
    sw      t2, 0x48(sp)
    sw      t1, 0x4C(sp)
    sw      t0, 0x50(sp)
    sw      a3, 0x54(sp)
    sw      a2, 0x58(sp)
    sw      a1, 0x5C(sp)
    sw      a0, 0x60(sp)
    sw      v1, 0x64(sp)
    sw      v0, 0x68(sp)
    sw      $1, 0x6C(sp)
    mflo    t0             # Move From LO
    nop
    sw      t0, 0x70(sp)
    mfhi    t0             # Move From HI
    nop
    sw      t0, 0x74(sp)
    mfc0    t0, C0_STATUS  # Status register
    sll     zero, 1
    sll     zero, 1
    sll     zero, 1
    sll     zero, 1
    sw      t0, 0x78(sp)
    mfc0    t0, C0_EPC     # Exception Program Counter
    sll     zero, 1
    sll     zero, 1
    sll     zero, 1
    sll     zero, 1
    sw      t0, 0x7C(sp)
    li      k1, 0x7C
    mfc0    k0, C0_CAUSE   # C0_CAUSE of last exception
    and     k0, k1
    beq     zero, k0, _int
    nop
    la    k0, _exception
    jr    k0
    nop
    
    .global _int
    .type    _int,@function
_int:
    jal     intr_handler
    nop
    lw      ra, 0(sp)
    lw      fp, 4(sp)
    sw      gp, 8(sp)
    lw      t9, 0xC(sp)
    lw      t8, 0x10(sp)
    lw      s7, 0x14(sp)
    lw      s6, 0x18(sp)
    lw      s5, 0x1C(sp)
    lw      s4, 0x20(sp)
    lw      s3, 0x24(sp)
    lw      s2, 0x28(sp)
    lw      s1, 0x2C(sp)
    lw      s0, 0x30(sp)
    lw      t7, 0x34(sp)
    lw      t6, 0x38(sp)
    lw      t5, 0x3C(sp)
    lw      t4, 0x40(sp)
    lw      t3, 0x44(sp)
    lw      t2, 0x48(sp)
    lw      t1, 0x4C(sp)
    lw      t0, 0x50(sp)
    lw      a3, 0x54(sp)
    lw      a2, 0x58(sp)
    lw      a1, 0x5C(sp)
    lw      a0, 0x60(sp)
    lw      v1, 0x64(sp)
    lw      v0, 0x68(sp)
    lw      v1, 0x6C(sp)
    lw      k0, 0x70(sp)
    mtlo    k0             # Move To LO
    nop
    lw      k0, 0x74(sp)
    mthi    k0             # Move To HI
    nop
    lw      k0, 0x78(sp)
    nop
    mtc0    k0, C0_STATUS  # Status register
    sll     zero, 1
    sll     zero, 1
    sll     zero, 1
    sll     zero, 1
    lw      k0, 0x7C(sp)
    nop
    mtc0    k0, C0_EPC     # Exception Program Counter
    sll     zero, 1
    sll     zero, 1
    sll     zero, 1
    sll     zero, 1
    addiu   sp, 0x80
    eret                   # Exception Return
    nop
    
    .extern _except_handler
    .global _exception
    .type   _exception,@function
_exception:
    move    a0, sp
    mfc0    a1, C0_CAUSE       # C0_CAUSE of last exception
    mfc0    a2, C0_EPC         # Exception Program Counter
    la      k0, except_handler
    jr      k0
    nop

    .set reorder