Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export/config/iriverh300.h
James Buren 4aa749b59d iriver_flash: refactor code to be easier to understand 
This overhauls most of the code to be easier to understand in terms
of the interactions with the flash. I found the original to be rather
confusing with how it kept switching between byte and word offsets.

My solution was to make all external access to the flash in terms of
sectors and bytes. Whatever the flash uses internally is now handled
by the subroutines for performing the erase, program, and verify
operations.

This helps make it far more consistent for the code that actually uses
these operations as they do not need to concern themselves with word
sizes and offsets anymore.

As a side effect of this change the flash operations are now done
entirely by subroutines; even the batch operations that used to use
custom loops.

Additionally some functions were merged with other functions in order
to reduce the amount of functions as well as consolidating common
code fragments.

Change-Id: I4698e920a226a3bbe8070004a14e5848abdd70ec
2020-11-11 13:30:09 +00:00

224 lines
6.4 KiB
C
Raw Blame History

/*
* This config file is for iriver H320, H340
*/
#define IRIVER_H300_SERIES 1
#define MODEL_NAME "iriver H300 series"
/* For Rolo and boot loader */
#define MODEL_NUMBER 2
/* define this if you use an ATA controller */
#define CONFIG_STORAGE STORAGE_ATA
/*define this if the ATA controller and method of USB access support LBA48 */
#define HAVE_LBA48
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you can flip your LCD */
#define HAVE_LCD_FLIP
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* LCD dimensions */
#define LCD_WIDTH 220
#define LCD_HEIGHT 176
/* sqrt(220^2 + 176^2) / 2.0 = 140.9 */
#define LCD_DPI 141
#define LCD_DEPTH 16 /* 65k colours */
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
/* remote LCD */
#define LCD_REMOTE_WIDTH 128
#define LCD_REMOTE_HEIGHT 64
#define LCD_REMOTE_DEPTH 1
#define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
/* Remote display colours, for screenshots and sim (0xRRGGBB) */
#define LCD_REMOTE_DARKCOLOR 0x000000
#define LCD_REMOTE_BRIGHTCOLOR 0x5a915a
#define LCD_REMOTE_BL_DARKCOLOR 0x000000
#define LCD_REMOTE_BL_BRIGHTCOLOR 0x82b4fa
#define CONFIG_KEYPAD IRIVER_H300_PAD
#define CONFIG_REMOTE_KEYPAD H300_REMOTE
/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT
/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_PCF50606
/* define this if you have a disk storage, i.e. something
that needs spinups and can cause skips when shaked */
#define HAVE_DISK_STORAGE
/* Define if the device can wake from an RTC alarm */
#define HAVE_RTC_ALARM
/* Define this if you have an remote lcd */
#define HAVE_REMOTE_LCD
/* Define if we have a hardware defect that causes ticking on the audio line */
#define HAVE_REMOTE_LCD_TICKING
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS
/* Which backlight fading type? */
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG
/* Define this if your LCD can be enabled/disabled */
#define HAVE_LCD_ENABLE
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
#define AB_REPEAT_ENABLE
#define CONFIG_TUNER TEA5767
#define CONFIG_TUNER_XTAL 32768
#define HAVE_UDA1380
/* define this if you have recording possibility */
#define HAVE_RECORDING
#define HAVE_HISTOGRAM
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
/* define hardware samples rate caps mask */
#define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
/* define the bitmask of recording sample rates */
#define REC_SAMPR_CAPS (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
#define HAVE_AGC
#define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
/* Hardware controlled charging with monitoring */
#define CONFIG_CHARGING CHARGING_MONITOR
/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER
/* define current usage levels */
#define CURRENT_NORMAL 80 /* 16h playback on 1300mAh battery from IriverRuntime wiki page */
#define CURRENT_BACKLIGHT 23 /* FIXME: This needs to be measured, copied from H100 */
#define CURRENT_RECORD 110 /* additional current while recording */
#define CURRENT_MAX_CHG 650 /* maximum charging current */
#define CURRENT_REMOTE 8 /* additional current when remote connected */
/* define this if the unit can have USB charging disabled by user -
* if USB/MAIN power is discernable and hardware doesn't compel charging */
#define HAVE_USB_CHARGING_ENABLE
/* Define this if you have a Motorola SCF5249 */
#define CONFIG_CPU MCF5249
/* Define this if you want to use coldfire's i2c interface */
#define CONFIG_I2C I2C_COLDFIRE
/* Define this if you can run rockbox from flash memory */
#define HAVE_FLASHED_ROCKBOX
/* The size of the flash ROM */
#define FLASH_SIZE 0x400000
/* Define this to the CPU frequency */
#define CPU_FREQ 11289600
/* Define this if you have ATA power-off control */
#define HAVE_ATA_POWER_OFF
#define CONFIG_LCD LCD_H300
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_ISP1362
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
#define BOOTFILE_EXT "iriver"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#define FLASH_BASE 0x00000000
#define BOOTLOADER_ENTRYPOINT 0x003F0000
#define FLASH_RAMIMAGE_ENTRY 0x00001000
#define FLASH_ROMIMAGE_ENTRY 0x00200000
#define FLASH_MAGIC 0xfbfbfbf1
/* Define this if there is an EEPROM chip */
#define HAVE_EEPROM
/* Define this if the EEPROM chip is used */
#define HAVE_EEPROM_SETTINGS
/* Define this for FM radio input available */
#define HAVE_FMRADIO_IN
/** Port-specific settings **/
/* Main LCD contrast range and defaults */
#define MIN_CONTRAST_SETTING 5
#define MAX_CONTRAST_SETTING 63
#define DEFAULT_CONTRAST_SETTING 40
/* Main LCD backlight brightness range and defaults */
/* accepts 0..15 but note that 0 and 1 give a black display on H300! */
#define MIN_BRIGHTNESS_SETTING 2 /* 2/16 (12.50%) */
#define MAX_BRIGHTNESS_SETTING 15 /* 15/16 (93.75%) */
#define DEFAULT_BRIGHTNESS_SETTING 9 /* 9/16 (56.25%) */
/* Remote LCD contrast range and defaults */
#define MIN_REMOTE_CONTRAST_SETTING 5
#define MAX_REMOTE_CONTRAST_SETTING 63
#define DEFAULT_REMOTE_CONTRAST_SETTING 42
/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY
Reference in a new issue View git blame Copy permalink