rockbox/firmware/target/arm/imx233/fmradio-imx233.c
Thomas Martitz 22b33d6eb8 Add missing kernel.h includes (hopefully all of them), take #2.
Change-Id: I62cedf992bb096987050621cfc34f0432e9da170
2014-01-05 20:42:48 +01:00

165 lines
4.6 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2013 by Amaury Pouly
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "kernel.h"
#include "fmradio-imx233.h"
#include "fmradio-target.h"
#include "pinctrl-imx233.h"
#include "i2c.h"
#include "generic_i2c.h"
#ifndef IMX233_FMRADIO_I2C
#error You must define IMX233_FMRADIO_I2C in fmradio-target.h
#endif
#ifndef IMX233_FMRADIO_POWER
#error You must define IMX233_FMRADIO_POWER in fmradio-target.h
#endif
/** Hardware I2C */
#if IMX233_FMRADIO_I2C == FMI_HW
void fmradio_i2c_init(void)
{
}
int fmradio_i2c_write(unsigned char address, const unsigned char* buf, int count)
{
return i2c_write(address, buf, count);
}
int fmradio_i2c_read(unsigned char address, unsigned char* buf, int count)
{
return i2c_read(address, buf, count);
}
/** Software I2C */
#elif IMX233_FMRADIO_I2C == FMI_SW
#if !defined(FMI_SW_SDA_BANK) || !defined(FMI_SW_SDA_PIN) || \
!defined(FMI_SW_SCL_BANK) || !defined(FMI_SW_SCL_PIN)
#error You must define FMI_SW_SDA_BANK, FMI_SW_SDA_PIN, FMI_SW_SCL_BANK and FMI_SW_SCL_PIN
#endif
static int fmradio_i2c_bus = -1;
static void i2c_scl_dir(bool out)
{
imx233_pinctrl_enable_gpio(FMI_SW_SCL_BANK, FMI_SW_SCL_PIN, out);
}
static void i2c_sda_dir(bool out)
{
imx233_pinctrl_enable_gpio(FMI_SW_SDA_BANK, FMI_SW_SDA_PIN, out);
}
static void i2c_scl_out(bool high)
{
imx233_pinctrl_set_gpio(FMI_SW_SCL_BANK, FMI_SW_SCL_PIN, high);
}
static void i2c_sda_out(bool high)
{
imx233_pinctrl_set_gpio(FMI_SW_SDA_BANK, FMI_SW_SDA_PIN, high);
}
static bool i2c_scl_in(void)
{
return imx233_pinctrl_get_gpio(FMI_SW_SCL_BANK, FMI_SW_SCL_PIN);
}
static bool i2c_sda_in(void)
{
return imx233_pinctrl_get_gpio(FMI_SW_SDA_BANK, FMI_SW_SDA_PIN);
}
static void i2c_delay(int d)
{
udelay(d);
}
struct i2c_interface fmradio_i2c =
{
.scl_dir = i2c_scl_dir,
.sda_dir = i2c_sda_dir,
.scl_out = i2c_scl_out,
.sda_out = i2c_sda_out,
.scl_in = i2c_scl_in,
.sda_in = i2c_sda_in,
.delay = i2c_delay,
.delay_hd_sta = 4,
.delay_hd_dat = 5,
.delay_su_dat = 1,
.delay_su_sto = 4,
.delay_su_sta = 5,
.delay_thigh = 4
};
void fmradio_i2c_init(void)
{
imx233_pinctrl_acquire(FMI_SW_SDA_BANK, FMI_SW_SDA_PIN, "fmradio_i2c_sda");
imx233_pinctrl_acquire(FMI_SW_SCL_BANK, FMI_SW_SCL_BANK, "fmradio_i2c_scl");
imx233_pinctrl_set_function(FMI_SW_SDA_BANK, FMI_SW_SDA_PIN, PINCTRL_FUNCTION_GPIO);
imx233_pinctrl_set_function(FMI_SW_SCL_BANK, FMI_SW_SCL_BANK, PINCTRL_FUNCTION_GPIO);
fmradio_i2c_bus = i2c_add_node(&fmradio_i2c);
}
int fmradio_i2c_write(unsigned char address, const unsigned char* buf, int count)
{
return i2c_write_data(fmradio_i2c_bus, address, -1, buf, count);
}
int fmradio_i2c_read(unsigned char address, unsigned char* buf, int count)
{
return i2c_read_data(fmradio_i2c_bus, address, -1, buf, count);
}
#else
#error Invalid value for IMX233_FMRADIO_I2C
#endif
static bool tuner_enable = false;
bool tuner_power(bool enable)
{
if(enable != tuner_enable)
{
tuner_enable = enable;
#if IMX233_FMRADIO_POWER == FMP_GPIO
static bool init = false;
if(!init)
{
/* CE is B0P29 (active high) */
imx233_pinctrl_acquire(FMP_GPIO_BANK, FMP_GPIO_PIN, "tuner_power");
imx233_pinctrl_set_function(FMP_GPIO_BANK, FMP_GPIO_PIN, PINCTRL_FUNCTION_GPIO);
imx233_pinctrl_enable_gpio(FMP_GPIO_BANK, FMP_GPIO_PIN, true);
}
imx233_pinctrl_set_gpio(FMP_GPIO_BANK, FMP_GPIO_PIN, enable);
/* power up delay */
sleep(FMP_GPIO_DELAY);
#elif IMX233_FMRADIO_POWER == FMP_NONE
#else
#error Invalid value for IMX233_FMRADIO_POWER
#endif
}
return tuner_enable;
}
bool tuner_powered(void)
{
return tuner_enable;
}