Michael Sevakis 05099149f1 Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit). ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16981 a1c6a512-1295-4272-9138-f99709370657		2008-04-06 04:34:57 +00:00
..
adc-ipod-1g2g.c	Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).	2008-04-06 04:34:57 +00:00
adc-target.h	First version of a 1st/2nd gen ADC driver. 1st gen is untested yet.	2007-07-30 20:12:03 +00:00
backlight-1g2g.c	1st/2nd Gen: Backlight inversion needs to be protected from interrupts, because it can happen any time, even while the greyscale lib or something else is writing to the LCD from an ISR. Also make backlight inversion only hit the LCD if necessary. * Use register definition in the 1st..3rd Gen backlight drivers.	2008-04-04 17:33:39 +00:00
backlight-target.h	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
powermgmt-1g2g.c	First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.	2007-08-17 06:45:18 +00:00