rockbox/firmware/target/arm/mmu-arm.S
Rafaël Carré 635de60ff3 mmu-arm.S: comment out dump_dcache_range()
It is only used by gigabeats, and is defined in mmu-armv6.S already

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25630 a1c6a512-1295-4272-9138-f99709370657
2010-04-13 15:22:01 +00:00

388 lines
14 KiB
ArmAsm

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006,2007 by Greg White
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "cpu.h"
/* Used by ARMv4 & ARMv5 CPUs with cp15 register and MMU */
/* WARNING : assume size of a data cache line == 32 bytes */
#if CONFIG_CPU == TCC7801 || CONFIG_CPU == AT91SAM9260
/* MMU present but unused */
#define HAVE_TEST_AND_CLEAN_CACHE
#elif CONFIG_CPU == DM320 || CONFIG_CPU == AS3525v2
#define USE_MMU
#define HAVE_TEST_AND_CLEAN_CACHE
#elif CONFIG_CPU == AS3525
#define USE_MMU
#define CACHE_SIZE 8
#elif CONFIG_CPU == S3C2440
#define USE_MMU
#define CACHE_SIZE 16
#else
#error Cache settings unknown for this CPU !
#endif /* CPU specific configuration */
@ Index format: 31:26 = index, N:5 = segment, remainder = SBZ
@ assume 64-way set associative separate I/D caches, 32B (2^5) cache line size
@ CACHE_SIZE = N (kB) = N*2^10 B
@ number of lines = N*2^(10-5) = N*2^(5)
@ Index bits = 6
@ Segment loops = N*2^(5-6) = N*2^(-1) = N/2
#define INDEX_STEPS (CACHE_SIZE/2)
#ifdef USE_MMU
/** MMU setup **/
/*
* void ttb_init(void);
*/
.section .text, "ax", %progbits
.align 2
.global ttb_init
.type ttb_init, %function
ttb_init:
ldr r0, =TTB_BASE_ADDR @
mvn r1, #0 @
mcr p15, 0, r0, c2, c0, 0 @ Set the TTB base address
mcr p15, 0, r1, c3, c0, 0 @ Set all domains to manager status
bx lr @
.size ttb_init, .-ttb_init
/*
* void map_section(unsigned int pa, unsigned int va, int mb, int flags);
*/
.section .text, "ax", %progbits
.align 2
.global map_section
.type map_section, %function
map_section:
@ align to 1MB
@ pa &= (-1 << 20);
mov r0, r0, lsr #20
mov r0, r0, lsl #20
@ pa |= (flags | 0x412);
@ bit breakdown:
@ 10: superuser - r/w, user - no access
@ 4: should be "1"
@ 3,2: Cache flags (flags (r3))
@ 1: Section signature
orr r0, r0, r3
orr r0, r0, #0x410
orr r0, r0, #0x2
@ unsigned int* ttbPtr = TTB_BASE + (va >> 20);
@ sections are 1MB size
mov r1, r1, lsr #20
ldr r3, =TTB_BASE_ADDR
add r1, r3, r1, lsl #0x2
@ Add MB to pa, flags are already present in pa, but addition
@ should not effect them
@
@ for( ; mb>0; mb--, pa += (1 << 20))
@ {
@ *(ttbPtr++) = pa;
@ }
cmp r2, #0
bxle lr
mov r3, #0x0
1: @ loop
str r0, [r1], #4
add r0, r0, #0x100000
add r3, r3, #0x1
cmp r2, r3
bne 1b @ loop
bx lr
.size map_section, .-map_section
/*
* void enable_mmu(void);
*/
.section .text, "ax", %progbits
.align 2
.global enable_mmu
.type enable_mmu, %function
enable_mmu:
mov r0, #0 @
mcr p15, 0, r0, c8, c7, 0 @ invalidate TLB
mcr p15, 0, r0, c7, c7,0 @ invalidate both i and dcache
mrc p15, 0, r0, c1, c0, 0 @
orr r0, r0, #1 @ enable mmu bit, i and dcache
orr r0, r0, #1<<2 @ enable dcache
orr r0, r0, #1<<12 @ enable icache
mcr p15, 0, r0, c1, c0, 0 @
nop @
nop @
nop @
nop @
bx lr @
.size enable_mmu, .-enable_mmu
.ltorg
#endif /* USE_MMU */
/** Cache coherency **/
/*
* Invalidate DCache for this range
* will do write back
* void invalidate_dcache_range(const void *base, unsigned int size);
*/
.section .text, "ax", %progbits
.align 2
.global invalidate_dcache_range
.type invalidate_dcache_range, %function
@ MVA format: 31:5 = Modified virtual address, 4:0 = SBZ
invalidate_dcache_range:
add r1, r0, r1 @ size -> end
cmp r1, r0 @ end <= start?
bxls lr @
bic r0, r0, #31 @ Align start to cache line (down)
1: @ inv_start @
mcr p15, 0, r0, c7, c14, 1 @ Clean and invalidate line by MVA
add r0, r0, #32 @
cmp r1, r0 @
mcrhi p15, 0, r0, c7, c14, 1 @ Clean and invalidate line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
mcrhi p15, 0, r0, c7, c14, 1 @ Clean and invalidate line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
mcrhi p15, 0, r0, c7, c14, 1 @ Clean and invalidate line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
mcrhi p15, 0, r0, c7, c14, 1 @ Clean and invalidate line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
mcrhi p15, 0, r0, c7, c14, 1 @ Clean and invalidate line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
mcrhi p15, 0, r0, c7, c14, 1 @ Clean and invalidate line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
mcrhi p15, 0, r0, c7, c14, 1 @ Clean and invalidate line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
bhi 1b @ inv_start @
mov r0, #0 @
mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer
bx lr @
.size invalidate_dcache_range, .-invalidate_dcache_range
/*
* clean DCache for this range
* forces DCache writeback for the specified range
* void clean_dcache_range(const void *base, unsigned int size);
*/
.section .text, "ax", %progbits
.align 2
.global clean_dcache_range
.type clean_dcache_range, %function
@ MVA format: 31:5 = Modified virtual address, 4:0 = SBZ
clean_dcache_range:
add r1, r0, r1 @ size -> end
cmp r1, r0 @ end <= start?
bxls lr @
bic r0, r0, #31 @ Align start to cache line (down)
1: @ clean_start @
mcr p15, 0, r0, c7, c10, 1 @ Clean line by MVA
add r0, r0, #32 @
cmp r1, r0 @
mcrhi p15, 0, r0, c7, c10, 1 @ Clean line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
mcrhi p15, 0, r0, c7, c10, 1 @ Clean line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
mcrhi p15, 0, r0, c7, c10, 1 @ Clean line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
mcrhi p15, 0, r0, c7, c10, 1 @ Clean line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
mcrhi p15, 0, r0, c7, c10, 1 @ Clean line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
mcrhi p15, 0, r0, c7, c10, 1 @ Clean line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
mcrhi p15, 0, r0, c7, c10, 1 @ Clean line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
bhi 1b @clean_start @
mov r0, #0 @
mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer
bx lr @
.size clean_dcache_range, .-clean_dcache_range
#if 0 /* unused */
/*
* Dump DCache for this range
* will *NOT* do write back except for buffer edges not on a line boundary
* void dump_dcache_range(const void *base, unsigned int size);
*/
.section .text, "ax", %progbits
.align 2
.global dump_dcache_range
.type dump_dcache_range, %function
@ MVA format: 31:5 = Modified virtual address, 4:0 = SBZ
dump_dcache_range:
add r1, r0, r1 @ size -> end
cmp r1, r0 @ end <= start?
bxls lr @
tst r0, #31 @ Check first line for bits set
bicne r0, r0, #31 @ Clear low five bits (down)
mcrne p15, 0, r0, c7, c14, 1 @ Clean and invalidate line by MVA
@ if not cache aligned
addne r0, r0, #32 @ Move to the next cache line
@
tst r1, #31 @ Check last line for bits set
bicne r1, r1, #31 @ Clear low five bits (down)
mcrne p15, 0, r1, c7, c14, 1 @ Clean and invalidate line by MVA
@ if not cache aligned
cmp r1, r0 @ end <= start now?
1: @ dump_start @
mcrhi p15, 0, r0, c7, c6, 1 @ Invalidate line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
mcrhi p15, 0, r0, c7, c6, 1 @ Invalidate line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
mcrhi p15, 0, r0, c7, c6, 1 @ Invalidate line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
mcrhi p15, 0, r0, c7, c6, 1 @ Invalidate line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
mcrhi p15, 0, r0, c7, c6, 1 @ Invalidate line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
mcrhi p15, 0, r0, c7, c6, 1 @ Invalidate line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
mcrhi p15, 0, r0, c7, c6, 1 @ Invalidate line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
mcrhi p15, 0, r0, c7, c6, 1 @ Invalidate line by MVA
addhi r0, r0, #32 @
cmphi r1, r0 @
bhi 1b @ dump_start @
mov r0, #0 @
mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer
bx lr @
.size dump_dcache_range, .-dump_dcache_range
#endif /* unused function */
/*
* Cleans entire DCache
* void clean_dcache(void);
*/
.section .text, "ax", %progbits
.align 2
.global clean_dcache
.type clean_dcache, %function
.global cpucache_flush @ Alias
clean_dcache:
cpucache_flush:
#ifdef HAVE_TEST_AND_CLEAN_CACHE
mrc p15, 0, r15, c7, c10, 3 @ test and clean dcache
bne clean_dcache
mov r1, #0
#else
@ Index format: 31:26 = index, N:5 = segment, remainder = SBZ, assume 64-way set associative separate I/D caches
@ N = log2(cache size in bytes / cache line size in bytes == 32) - 6 /* index bits */ + 4 /* start offset */
mov r1, #0x00000000 @
1: @ clean_start @
mcr p15, 0, r1, c7, c10, 2 @ Clean entry by index
add r0, r1, #0x00000020 @
mcr p15, 0, r0, c7, c10, 2 @ Clean entry by index
.rept INDEX_STEPS - 2 /* 2 steps already executed */
add r0, r0, #0x00000020 @
mcr p15, 0, r0, c7, c10, 2 @ Clean entry by index
.endr
adds r1, r1, #0x04000000 @ will wrap to zero at loop end
bne 1b @ clean_start @
#endif /* HAVE_TEST_AND_CLEAN_CACHE */
mcr p15, 0, r1, c7, c10, 4 @ Drain write buffer
bx lr @
.size clean_dcache, .-clean_dcache
/*
* Invalidate entire DCache
* will do writeback
* void invalidate_dcache(void);
*/
.section .icode, "ax", %progbits
.align 2
.global invalidate_dcache
.type invalidate_dcache, %function
invalidate_dcache:
#ifdef HAVE_TEST_AND_CLEAN_CACHE
mrc p15, 0, r15, c7, c14, 3 @ test, clean and invalidate dcache
bne invalidate_dcache
mov r1, #0
#else
@ Index format: 31:26 = index, N:5 = segment, remainder = SBZ, assume 64-way set associative separate I/D caches
@ N = log2(cache size in bytes / cache line size in bytes == 32) - 6 /* index bits */ + 4 /* start offset */
mov r1, #0x00000000 @
1: @ inv_start @
mcr p15, 0, r1, c7, c14, 2 @ Clean and invalidate entry by index
add r0, r1, #0x00000020 @
mcr p15, 0, r0, c7, c14, 2 @ Clean and invalidate entry by index
.rept INDEX_STEPS - 2 /* 2 steps already executed */
add r0, r0, #0x00000020 @
mcr p15, 0, r0, c7, c14, 2 @ Clean and invalidate entry by index
.endr
adds r1, r1, #0x04000000 @ will wrap to zero at loop end
bne 1b @ inv_start @
#endif /* HAVE_TEST_AND_CLEAN_CACHE */
mcr p15, 0, r1, c7, c10, 4 @ Drain write buffer
bx lr @
.size invalidate_dcache, .-invalidate_dcache
/*
* Invalidate entire ICache and DCache
* will do writeback
* void invalidate_idcache(void);
*/
.section .icode, "ax", %progbits
.align 2
.global invalidate_idcache
.type invalidate_idcache, %function
.global cpucache_invalidate @ Alias
invalidate_idcache:
cpucache_invalidate:
mov r2, lr @ save lr to r1, call uses r0 only
bl invalidate_dcache @ Clean and invalidate entire DCache
mcr p15, 0, r1, c7, c5, 0 @ Invalidate ICache (r1=0 from call)
mov pc, r2 @
.size invalidate_idcache, .-invalidate_idcache