8f38f85fbd
For s5l8701, s5l8702 and as3525v2 targets. The crash occurs when USB is inserted or extracted while the playlist is being loaded or updated (it could take a few seconds for huge playlists), at this point all buflib memory is allocated and not freed before usb_starage_init_connection() is executed. This workaround mitigates this panic by using static memory for USB buffers, so this memory cannot be used for other tasks, in addition the problem still persist when playlist load is 'paused' by USB insertion and then updated after USB extraction. Change-Id: Iff1db5a949361fd543e0b494924d1f2906c84b5e
1253 lines
42 KiB
C
1253 lines
42 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2007 by Björn Stenberg
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "string.h"
|
|
#include "system.h"
|
|
#include "usb_core.h"
|
|
#include "usb_drv.h"
|
|
#include "usb_class_driver.h"
|
|
/*#define LOGF_ENABLE*/
|
|
#include "logf.h"
|
|
#include "storage.h"
|
|
#include "disk.h"
|
|
#include "fs_defines.h"
|
|
/* Needed to get at the audio buffer */
|
|
#include "audio.h"
|
|
#include "usb_storage.h"
|
|
#if CONFIG_RTC
|
|
#include "timefuncs.h"
|
|
#endif
|
|
#include "core_alloc.h"
|
|
#include "panic.h"
|
|
|
|
#ifdef USB_USE_RAMDISK
|
|
#define RAMDISK_SIZE 2048
|
|
#endif
|
|
|
|
/* These defaults allow the operation */
|
|
#ifndef USBSTOR_READ_SECTORS_FILTER
|
|
#define USBSTOR_READ_SECTORS_FILTER() ({ 0; })
|
|
#endif
|
|
|
|
#ifndef USBSTOR_WRITE_SECTORS_FILTER
|
|
#define USBSTOR_WRITE_SECTORS_FILTER() ({ 0; })
|
|
#endif
|
|
|
|
/* the ARC driver currently supports up to 64k USB transfers. This is
|
|
* enough for efficient mass storage support, as commonly host OSes
|
|
* don't do larger SCSI transfers anyway, so larger USB transfers
|
|
* wouldn't buy us anything.
|
|
* Due to being the double-buffering system used, using a smaller write buffer
|
|
* ends up being more efficient. Measurements have shown that 24k to 28k is
|
|
* optimal, except for sd devices that apparently don't gain anything from
|
|
* double-buffering
|
|
*/
|
|
#ifdef USB_READ_BUFFER_SIZE
|
|
#define READ_BUFFER_SIZE USB_READ_BUFFER_SIZE
|
|
#else
|
|
#if CONFIG_USBOTG == USBOTG_AS3525
|
|
/* We'd need to implement multidescriptor dma for sizes >65535 */
|
|
#define READ_BUFFER_SIZE (1024*63)
|
|
#else
|
|
#define READ_BUFFER_SIZE (1024*64)
|
|
#endif /* CONFIG_CPU == AS3525 */
|
|
#endif /* USB_READ_BUFFER_SIZE */
|
|
|
|
/* We don't use sizeof() here, because we *need* a multiple of 32 */
|
|
#define MAX_CBW_SIZE 32
|
|
|
|
#ifdef USB_WRITE_BUFFER_SIZE
|
|
#define WRITE_BUFFER_SIZE USB_WRITE_BUFFER_SIZE
|
|
#else
|
|
#if (CONFIG_STORAGE & STORAGE_SD)
|
|
#if CONFIG_USBOTG == USBOTG_AS3525
|
|
/* We'd need to implement multidescriptor dma for sizes >65535 */
|
|
#define WRITE_BUFFER_SIZE (1024*63)
|
|
#else
|
|
#define WRITE_BUFFER_SIZE (1024*64)
|
|
#endif /* CONFIG_CPU == AS3525 */
|
|
#else
|
|
#define WRITE_BUFFER_SIZE (1024*24)
|
|
#endif /* (CONFIG_STORAGE & STORAGE_SD) */
|
|
#endif /* USB_WRITE_BUFFER_SIZE */
|
|
|
|
#define ALLOCATE_BUFFER_SIZE (2*MAX(READ_BUFFER_SIZE,WRITE_BUFFER_SIZE))
|
|
|
|
/* bulk-only class specific requests */
|
|
#define USB_BULK_RESET_REQUEST 0xff
|
|
#define USB_BULK_GET_MAX_LUN 0xfe
|
|
|
|
#define DIRECT_ACCESS_DEVICE 0x00 /* disks */
|
|
#define DEVICE_REMOVABLE 0x80
|
|
|
|
#define CBW_SIGNATURE 0x43425355
|
|
#define CSW_SIGNATURE 0x53425355
|
|
|
|
#define SCSI_TEST_UNIT_READY 0x00
|
|
#define SCSI_INQUIRY 0x12
|
|
#define SCSI_MODE_SENSE_6 0x1a
|
|
#define SCSI_MODE_SENSE_10 0x5a
|
|
#define SCSI_REQUEST_SENSE 0x03
|
|
#define SCSI_ALLOW_MEDIUM_REMOVAL 0x1e
|
|
#define SCSI_READ_CAPACITY 0x25
|
|
#define SCSI_READ_FORMAT_CAPACITY 0x23
|
|
#define SCSI_READ_10 0x28
|
|
#define SCSI_WRITE_10 0x2a
|
|
#define SCSI_START_STOP_UNIT 0x1b
|
|
#define SCSI_REPORT_LUNS 0xa0
|
|
#define SCSI_WRITE_BUFFER 0x3b
|
|
|
|
#define UMS_STATUS_GOOD 0x00
|
|
#define UMS_STATUS_FAIL 0x01
|
|
|
|
#define SENSE_NOT_READY 0x02
|
|
#define SENSE_MEDIUM_ERROR 0x03
|
|
#define SENSE_ILLEGAL_REQUEST 0x05
|
|
#define SENSE_UNIT_ATTENTION 0x06
|
|
|
|
#define ASC_MEDIUM_NOT_PRESENT 0x3a
|
|
#define ASC_INVALID_FIELD_IN_CBD 0x24
|
|
#define ASC_LBA_OUT_OF_RANGE 0x21
|
|
#define ASC_WRITE_ERROR 0x0C
|
|
#define ASC_READ_ERROR 0x11
|
|
#define ASC_NOT_READY 0x04
|
|
#define ASC_INVALID_COMMAND 0x20
|
|
|
|
#define ASCQ_BECOMING_READY 0x01
|
|
|
|
#define SCSI_FORMAT_CAPACITY_FORMATTED_MEDIA 0x02000000
|
|
|
|
/* storage interface */
|
|
|
|
#define USB_SC_SCSI 0x06 /* Transparent */
|
|
#define USB_PROT_BULK 0x50 /* bulk only */
|
|
|
|
static struct usb_interface_descriptor __attribute__((aligned(2)))
|
|
interface_descriptor =
|
|
{
|
|
.bLength = sizeof(struct usb_interface_descriptor),
|
|
.bDescriptorType = USB_DT_INTERFACE,
|
|
.bInterfaceNumber = 0,
|
|
.bAlternateSetting = 0,
|
|
.bNumEndpoints = 2,
|
|
.bInterfaceClass = USB_CLASS_MASS_STORAGE,
|
|
.bInterfaceSubClass = USB_SC_SCSI,
|
|
.bInterfaceProtocol = USB_PROT_BULK,
|
|
.iInterface = 0
|
|
};
|
|
|
|
static struct usb_endpoint_descriptor __attribute__((aligned(2)))
|
|
endpoint_descriptor =
|
|
{
|
|
.bLength = sizeof(struct usb_endpoint_descriptor),
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bEndpointAddress = 0,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.wMaxPacketSize = 0,
|
|
.bInterval = 0
|
|
};
|
|
|
|
struct inquiry_data {
|
|
unsigned char DeviceType;
|
|
unsigned char DeviceTypeModifier;
|
|
unsigned char Versions;
|
|
unsigned char Format;
|
|
unsigned char AdditionalLength;
|
|
unsigned char Reserved[2];
|
|
unsigned char Capability;
|
|
unsigned char VendorId[8];
|
|
unsigned char ProductId[16];
|
|
unsigned char ProductRevisionLevel[4];
|
|
} __attribute__ ((packed));
|
|
|
|
struct report_lun_data {
|
|
unsigned int lun_list_length;
|
|
unsigned int reserved1;
|
|
unsigned char luns[NUM_DRIVES][8];
|
|
} __attribute__ ((packed));
|
|
|
|
struct sense_data {
|
|
unsigned char ResponseCode;
|
|
unsigned char Obsolete;
|
|
unsigned char fei_sensekey;
|
|
unsigned int Information;
|
|
unsigned char AdditionalSenseLength;
|
|
unsigned int CommandSpecificInformation;
|
|
unsigned char AdditionalSenseCode;
|
|
unsigned char AdditionalSenseCodeQualifier;
|
|
unsigned char FieldReplaceableUnitCode;
|
|
unsigned char SKSV;
|
|
unsigned short SenseKeySpecific;
|
|
} __attribute__ ((packed));
|
|
|
|
struct mode_sense_bdesc_longlba {
|
|
unsigned char num_blocks[8];
|
|
unsigned char reserved[4];
|
|
unsigned char block_size[4];
|
|
} __attribute__ ((packed));
|
|
|
|
struct mode_sense_bdesc_shortlba {
|
|
unsigned char density_code;
|
|
unsigned char num_blocks[3];
|
|
unsigned char reserved;
|
|
unsigned char block_size[3];
|
|
} __attribute__ ((packed));
|
|
|
|
struct mode_sense_data_10 {
|
|
unsigned short mode_data_length;
|
|
unsigned char medium_type;
|
|
unsigned char device_specific;
|
|
unsigned char longlba;
|
|
unsigned char reserved;
|
|
unsigned short block_descriptor_length;
|
|
struct mode_sense_bdesc_longlba block_descriptor;
|
|
} __attribute__ ((packed));
|
|
|
|
struct mode_sense_data_6 {
|
|
unsigned char mode_data_length;
|
|
unsigned char medium_type;
|
|
unsigned char device_specific;
|
|
unsigned char block_descriptor_length;
|
|
struct mode_sense_bdesc_shortlba block_descriptor;
|
|
} __attribute__ ((packed));
|
|
|
|
struct command_block_wrapper {
|
|
unsigned int signature;
|
|
unsigned int tag;
|
|
unsigned int data_transfer_length;
|
|
unsigned char flags;
|
|
unsigned char lun;
|
|
unsigned char command_length;
|
|
unsigned char command_block[16];
|
|
} __attribute__ ((packed));
|
|
|
|
struct command_status_wrapper {
|
|
unsigned int signature;
|
|
unsigned int tag;
|
|
unsigned int data_residue;
|
|
unsigned char status;
|
|
} __attribute__ ((packed));
|
|
|
|
struct capacity {
|
|
unsigned int block_count;
|
|
unsigned int block_size;
|
|
} __attribute__ ((packed));
|
|
|
|
struct format_capacity {
|
|
unsigned int following_length;
|
|
unsigned int block_count;
|
|
unsigned int block_size;
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
static union {
|
|
unsigned char* transfer_buffer;
|
|
struct inquiry_data* inquiry;
|
|
struct capacity* capacity_data;
|
|
struct format_capacity* format_capacity_data;
|
|
struct sense_data *sense_data;
|
|
struct mode_sense_data_6 *ms_data_6;
|
|
struct mode_sense_data_10 *ms_data_10;
|
|
struct report_lun_data *lun_data;
|
|
struct command_status_wrapper* csw;
|
|
char *max_lun;
|
|
} tb;
|
|
|
|
static char *cbw_buffer;
|
|
|
|
static struct {
|
|
unsigned int sector;
|
|
unsigned int count;
|
|
unsigned int orig_count;
|
|
unsigned int cur_cmd;
|
|
unsigned int tag;
|
|
unsigned int lun;
|
|
unsigned char *data[2];
|
|
unsigned char data_select;
|
|
unsigned int last_result;
|
|
} cur_cmd;
|
|
|
|
static struct {
|
|
unsigned char sense_key;
|
|
unsigned char information;
|
|
unsigned char asc;
|
|
unsigned char ascq;
|
|
} cur_sense_data;
|
|
|
|
static void handle_scsi(struct command_block_wrapper* cbw);
|
|
static void send_csw(int status);
|
|
static void send_command_result(void *data,int size);
|
|
static void send_command_failed_result(void);
|
|
static void send_block_data(void *data,int size);
|
|
static void receive_block_data(void *data,int size);
|
|
#if CONFIG_RTC
|
|
static void receive_time(void);
|
|
#endif
|
|
static void fill_inquiry(IF_MD_NONVOID(int lun));
|
|
static void send_and_read_next(void);
|
|
static bool ejected[NUM_DRIVES];
|
|
static bool locked[NUM_DRIVES];
|
|
|
|
static int usb_interface;
|
|
static int ep_in, ep_out;
|
|
|
|
#if defined(HAVE_MULTIDRIVE)
|
|
static bool skip_first = 0;
|
|
#endif
|
|
|
|
#ifdef USB_USE_RAMDISK
|
|
static unsigned char* ramdisk_buffer;
|
|
#endif
|
|
|
|
static enum {
|
|
WAITING_FOR_COMMAND,
|
|
SENDING_BLOCKS,
|
|
SENDING_RESULT,
|
|
SENDING_FAILED_RESULT,
|
|
RECEIVING_BLOCKS,
|
|
#if CONFIG_RTC
|
|
RECEIVING_TIME,
|
|
#endif
|
|
WAITING_FOR_CSW_COMPLETION_OR_COMMAND,
|
|
WAITING_FOR_CSW_COMPLETION
|
|
} state = WAITING_FOR_COMMAND;
|
|
|
|
#if CONFIG_RTC
|
|
static void yearday_to_daymonth(int yd, int y, int *d, int *m)
|
|
{
|
|
static char t[] = { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
|
|
|
|
bool leap = (y%4 == 0 && y%100 != 0) || y%400 == 0;
|
|
t[1] = leap ? 29 : 28;
|
|
|
|
int i;
|
|
for (i = 0; i < 12 && yd >= t[i]; i++)
|
|
yd -= t[i];
|
|
|
|
*d = yd+1;
|
|
*m = i;
|
|
}
|
|
#endif /* CONFIG_RTC */
|
|
|
|
static bool check_disk_present(IF_MD_NONVOID(int volume))
|
|
{
|
|
#ifdef USB_USE_RAMDISK
|
|
return true;
|
|
#else
|
|
return disk_present(IF_MD(volume));
|
|
#endif
|
|
}
|
|
|
|
#ifdef HAVE_HOTSWAP
|
|
void usb_storage_notify_hotswap(int volume,bool inserted)
|
|
{
|
|
logf("notify %d",inserted);
|
|
if(inserted && check_disk_present(IF_MD(volume))) {
|
|
ejected[volume] = false;
|
|
}
|
|
else {
|
|
ejected[volume] = true;
|
|
/* If this happens while the device is locked, weird things may happen.
|
|
At least try to keep our state consistent */
|
|
locked[volume]=false;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef HAVE_MULTIDRIVE
|
|
void usb_set_skip_first_drive(bool skip)
|
|
{
|
|
skip_first = skip;
|
|
}
|
|
#endif
|
|
|
|
/* called by usb_core_init() */
|
|
void usb_storage_init(void)
|
|
{
|
|
logf("usb_storage_init done");
|
|
}
|
|
|
|
int usb_storage_request_endpoints(struct usb_class_driver *drv)
|
|
{
|
|
ep_in = usb_core_request_endpoint(USB_ENDPOINT_XFER_BULK, USB_DIR_IN, drv);
|
|
|
|
if(ep_in<0)
|
|
return -1;
|
|
|
|
ep_out = usb_core_request_endpoint(USB_ENDPOINT_XFER_BULK, USB_DIR_OUT,
|
|
drv);
|
|
|
|
if(ep_out<0) {
|
|
usb_core_release_endpoint(ep_in);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int usb_storage_set_first_interface(int interface)
|
|
{
|
|
usb_interface = interface;
|
|
return interface + 1;
|
|
}
|
|
|
|
int usb_storage_get_config_descriptor(unsigned char *dest,int max_packet_size)
|
|
{
|
|
unsigned char *orig_dest = dest;
|
|
|
|
interface_descriptor.bInterfaceNumber = usb_interface;
|
|
PACK_DATA(&dest, interface_descriptor);
|
|
|
|
endpoint_descriptor.wMaxPacketSize = max_packet_size;
|
|
|
|
endpoint_descriptor.bEndpointAddress = ep_in;
|
|
PACK_DATA(&dest, endpoint_descriptor);
|
|
|
|
endpoint_descriptor.bEndpointAddress = ep_out;
|
|
PACK_DATA(&dest, endpoint_descriptor);
|
|
|
|
return (dest - orig_dest);
|
|
}
|
|
|
|
static int usb_handle;
|
|
void usb_storage_init_connection(void)
|
|
{
|
|
logf("ums: set config");
|
|
/* prime rx endpoint. We only need room for commands */
|
|
state = WAITING_FOR_COMMAND;
|
|
|
|
#if (CONFIG_CPU == IMX31L || defined(CPU_TCC77X) || defined(CPU_TCC780X) || \
|
|
CONFIG_CPU == S5L8702 || CONFIG_CPU == S5L8701 || CONFIG_CPU == AS3525v2 || \
|
|
defined(BOOTLOADER) || CONFIG_CPU == DM320) && !defined(CPU_PP502x)
|
|
static unsigned char _cbw_buffer[MAX_CBW_SIZE]
|
|
USB_DEVBSS_ATTR __attribute__((aligned(32)));
|
|
cbw_buffer = (void *)_cbw_buffer;
|
|
|
|
static unsigned char _transfer_buffer[ALLOCATE_BUFFER_SIZE]
|
|
USB_DEVBSS_ATTR __attribute__((aligned(32)));
|
|
tb.transfer_buffer = (void *)_transfer_buffer;
|
|
#ifdef USB_USE_RAMDISK
|
|
static unsigned char _ramdisk_buffer[RAMDISK_SIZE*SECTOR_SIZE];
|
|
ramdisk_buffer = _ramdisk_buffer;
|
|
#endif
|
|
#else
|
|
unsigned char * buffer;
|
|
/* dummy ops with no callbacks, needed because by
|
|
* default buflib buffers can be moved around which must be avoided */
|
|
static struct buflib_callbacks dummy_ops;
|
|
|
|
// Add 31 to handle worst-case misalignment
|
|
usb_handle = core_alloc_ex("usb storage", ALLOCATE_BUFFER_SIZE + MAX_CBW_SIZE + 31, &dummy_ops);
|
|
if (usb_handle < 0)
|
|
panicf("%s(): OOM", __func__);
|
|
|
|
buffer = core_get_data(usb_handle);
|
|
#if defined(UNCACHED_ADDR) && CONFIG_CPU != AS3525
|
|
cbw_buffer = (void *)UNCACHED_ADDR((unsigned int)(buffer+31) & 0xffffffe0);
|
|
#else
|
|
cbw_buffer = (void *)((unsigned int)(buffer+31) & 0xffffffe0);
|
|
#endif
|
|
tb.transfer_buffer = cbw_buffer + MAX_CBW_SIZE;
|
|
commit_discard_dcache();
|
|
#ifdef USB_USE_RAMDISK
|
|
ramdisk_buffer = tb.transfer_buffer + ALLOCATE_BUFFER_SIZE;
|
|
#endif
|
|
#endif
|
|
usb_drv_recv(ep_out, cbw_buffer, MAX_CBW_SIZE);
|
|
|
|
int i;
|
|
for(i=0;i<storage_num_drives();i++) {
|
|
locked[i] = false;
|
|
ejected[i] = !check_disk_present(IF_MD(i));
|
|
queue_broadcast(SYS_USB_LUN_LOCKED, (i<<16)+0);
|
|
}
|
|
}
|
|
|
|
void usb_storage_disconnect(void)
|
|
{
|
|
if (usb_handle > 0)
|
|
usb_handle = core_free(usb_handle);
|
|
}
|
|
|
|
/* called by usb_core_transfer_complete() */
|
|
void usb_storage_transfer_complete(int ep,int dir,int status,int length)
|
|
{
|
|
(void)ep;
|
|
struct command_block_wrapper* cbw = (void*)cbw_buffer;
|
|
#if CONFIG_RTC
|
|
struct tm tm;
|
|
#endif
|
|
|
|
logf("transfer result for ep %d/%d %X %d", ep,dir,status, length);
|
|
switch(state) {
|
|
case RECEIVING_BLOCKS:
|
|
if(dir==USB_DIR_IN) {
|
|
logf("IN received in RECEIVING");
|
|
}
|
|
logf("scsi write %d %d", cur_cmd.sector, cur_cmd.count);
|
|
if(status==0) {
|
|
if((unsigned int)length!=(SECTOR_SIZE* cur_cmd.count)
|
|
&& (unsigned int)length!=WRITE_BUFFER_SIZE) {
|
|
logf("unexpected length :%d",length);
|
|
break;
|
|
}
|
|
|
|
unsigned int next_sector = cur_cmd.sector +
|
|
(WRITE_BUFFER_SIZE/SECTOR_SIZE);
|
|
unsigned int next_count = cur_cmd.count -
|
|
MIN(cur_cmd.count,WRITE_BUFFER_SIZE/SECTOR_SIZE);
|
|
int next_select = !cur_cmd.data_select;
|
|
|
|
if(next_count!=0) {
|
|
/* Ask the host to send more, to the other buffer */
|
|
receive_block_data(cur_cmd.data[next_select],
|
|
MIN(WRITE_BUFFER_SIZE,next_count*SECTOR_SIZE));
|
|
}
|
|
|
|
/* Now write the data that just came in, while the host is
|
|
sending the next bit */
|
|
#ifdef USB_USE_RAMDISK
|
|
memcpy(ramdisk_buffer + cur_cmd.sector*SECTOR_SIZE,
|
|
cur_cmd.data[cur_cmd.data_select],
|
|
MIN(WRITE_BUFFER_SIZE/SECTOR_SIZE, cur_cmd.count)*SECTOR_SIZE);
|
|
#else
|
|
int result = USBSTOR_WRITE_SECTORS_FILTER();
|
|
|
|
if (result == 0) {
|
|
result = storage_write_sectors(IF_MD(cur_cmd.lun,)
|
|
cur_cmd.sector,
|
|
MIN(WRITE_BUFFER_SIZE/SECTOR_SIZE, cur_cmd.count),
|
|
cur_cmd.data[cur_cmd.data_select]);
|
|
}
|
|
|
|
if(result != 0) {
|
|
send_csw(UMS_STATUS_FAIL);
|
|
cur_sense_data.sense_key=SENSE_MEDIUM_ERROR;
|
|
cur_sense_data.asc=ASC_WRITE_ERROR;
|
|
cur_sense_data.ascq=0;
|
|
break;
|
|
}
|
|
#endif
|
|
if(next_count==0) {
|
|
send_csw(UMS_STATUS_GOOD);
|
|
}
|
|
|
|
/* Switch buffers for the next one */
|
|
cur_cmd.data_select=!cur_cmd.data_select;
|
|
|
|
cur_cmd.sector = next_sector;
|
|
cur_cmd.count = next_count;
|
|
}
|
|
else {
|
|
logf("Transfer failed %X",status);
|
|
send_csw(UMS_STATUS_FAIL);
|
|
/* TODO fill in cur_sense_data */
|
|
cur_sense_data.sense_key=0;
|
|
cur_sense_data.information=0;
|
|
cur_sense_data.asc=0;
|
|
cur_sense_data.ascq=0;
|
|
}
|
|
break;
|
|
case WAITING_FOR_CSW_COMPLETION_OR_COMMAND:
|
|
if(dir==USB_DIR_IN) {
|
|
/* This was the CSW */
|
|
state = WAITING_FOR_COMMAND;
|
|
}
|
|
else {
|
|
/* This was the command */
|
|
state = WAITING_FOR_CSW_COMPLETION;
|
|
/* We now have the CBW, but we won't execute it yet to avoid
|
|
* issues with the still-pending CSW */
|
|
}
|
|
break;
|
|
case WAITING_FOR_COMMAND:
|
|
if(dir==USB_DIR_IN) {
|
|
logf("IN received in WAITING_FOR_COMMAND");
|
|
}
|
|
handle_scsi(cbw);
|
|
break;
|
|
case WAITING_FOR_CSW_COMPLETION:
|
|
if(dir==USB_DIR_OUT) {
|
|
logf("OUT received in WAITING_FOR_CSW_COMPLETION");
|
|
}
|
|
handle_scsi(cbw);
|
|
break;
|
|
#if 0
|
|
if(cur_cmd.cur_cmd == SCSI_WRITE_10)
|
|
{
|
|
queue_broadcast(SYS_USB_WRITE_DATA, (cur_cmd.lun<<16)+cur_cmd.orig_count);
|
|
}
|
|
else if(cur_cmd.cur_cmd == SCSI_READ_10)
|
|
{
|
|
queue_broadcast(SYS_USB_READ_DATA, (cur_cmd.lun<<16)+cur_cmd.orig_count);
|
|
}
|
|
#endif
|
|
break;
|
|
case SENDING_RESULT:
|
|
if(dir==USB_DIR_OUT) {
|
|
logf("OUT received in SENDING");
|
|
}
|
|
if(status==0) {
|
|
//logf("data sent, now send csw");
|
|
send_csw(UMS_STATUS_GOOD);
|
|
}
|
|
else {
|
|
logf("Transfer failed %X",status);
|
|
send_csw(UMS_STATUS_FAIL);
|
|
/* TODO fill in cur_sense_data */
|
|
cur_sense_data.sense_key=0;
|
|
cur_sense_data.information=0;
|
|
cur_sense_data.asc=0;
|
|
cur_sense_data.ascq=0;
|
|
}
|
|
break;
|
|
case SENDING_FAILED_RESULT:
|
|
if(dir==USB_DIR_OUT) {
|
|
logf("OUT received in SENDING");
|
|
}
|
|
send_csw(UMS_STATUS_FAIL);
|
|
break;
|
|
case SENDING_BLOCKS:
|
|
if(dir==USB_DIR_OUT) {
|
|
logf("OUT received in SENDING");
|
|
}
|
|
if(status==0) {
|
|
if(cur_cmd.count==0) {
|
|
//logf("data sent, now send csw");
|
|
if(cur_cmd.last_result!=0) {
|
|
/* The last read failed. */
|
|
send_csw(UMS_STATUS_FAIL);
|
|
cur_sense_data.sense_key=SENSE_MEDIUM_ERROR;
|
|
cur_sense_data.asc=ASC_READ_ERROR;
|
|
cur_sense_data.ascq=0;
|
|
return;
|
|
}
|
|
else
|
|
send_csw(UMS_STATUS_GOOD);
|
|
}
|
|
else {
|
|
send_and_read_next();
|
|
}
|
|
}
|
|
else {
|
|
logf("Transfer failed %X",status);
|
|
send_csw(UMS_STATUS_FAIL);
|
|
/* TODO fill in cur_sense_data */
|
|
cur_sense_data.sense_key=0;
|
|
cur_sense_data.information=0;
|
|
cur_sense_data.asc=0;
|
|
cur_sense_data.ascq=0;
|
|
}
|
|
break;
|
|
#if CONFIG_RTC
|
|
case RECEIVING_TIME:
|
|
tm.tm_year=(tb.transfer_buffer[0]<<8)+tb.transfer_buffer[1] - 1900;
|
|
tm.tm_yday=(tb.transfer_buffer[2]<<8)+tb.transfer_buffer[3];
|
|
tm.tm_hour=tb.transfer_buffer[5];
|
|
tm.tm_min=tb.transfer_buffer[6];
|
|
tm.tm_sec=tb.transfer_buffer[7];
|
|
yearday_to_daymonth(tm.tm_yday,tm.tm_year + 1900,&tm.tm_mday,&tm.tm_mon);
|
|
set_day_of_week(&tm);
|
|
set_time(&tm);
|
|
send_csw(UMS_STATUS_GOOD);
|
|
break;
|
|
#endif /* CONFIG_RTC */
|
|
}
|
|
}
|
|
|
|
/* called by usb_core_control_request() */
|
|
bool usb_storage_control_request(struct usb_ctrlrequest* req, unsigned char* dest)
|
|
{
|
|
bool handled = false;
|
|
|
|
(void)dest;
|
|
switch (req->bRequest) {
|
|
case USB_BULK_GET_MAX_LUN: {
|
|
*tb.max_lun = storage_num_drives() - 1;
|
|
#if defined(HAVE_MULTIDRIVE)
|
|
if(skip_first) (*tb.max_lun) --;
|
|
#endif
|
|
logf("ums: getmaxlun");
|
|
usb_drv_recv(EP_CONTROL, NULL, 0); /* ack */
|
|
usb_drv_send(EP_CONTROL, tb.max_lun, 1);
|
|
handled = true;
|
|
break;
|
|
}
|
|
|
|
case USB_BULK_RESET_REQUEST:
|
|
logf("ums: bulk reset");
|
|
state = WAITING_FOR_COMMAND;
|
|
/* UMS BOT 3.1 says The device shall preserve the value of its bulk
|
|
data toggle bits and endpoint STALL conditions despite
|
|
the Bulk-Only Mass Storage Reset. */
|
|
#if 0
|
|
usb_drv_reset_endpoint(ep_in, false);
|
|
usb_drv_reset_endpoint(ep_out, true);
|
|
#endif
|
|
usb_drv_send(EP_CONTROL, NULL, 0); /* ack */
|
|
handled = true;
|
|
break;
|
|
}
|
|
|
|
return handled;
|
|
}
|
|
|
|
static void send_and_read_next(void)
|
|
{
|
|
int result = USBSTOR_READ_SECTORS_FILTER();
|
|
|
|
if(result != 0 && cur_cmd.last_result == 0)
|
|
cur_cmd.last_result = result;
|
|
|
|
send_block_data(cur_cmd.data[cur_cmd.data_select],
|
|
MIN(READ_BUFFER_SIZE,cur_cmd.count*SECTOR_SIZE));
|
|
|
|
/* Switch buffers for the next one */
|
|
cur_cmd.data_select=!cur_cmd.data_select;
|
|
|
|
cur_cmd.sector+=(READ_BUFFER_SIZE/SECTOR_SIZE);
|
|
cur_cmd.count-=MIN(cur_cmd.count,READ_BUFFER_SIZE/SECTOR_SIZE);
|
|
|
|
if(cur_cmd.count!=0) {
|
|
/* already read the next bit, so we can send it out immediately when the
|
|
* current transfer completes. */
|
|
#ifdef USB_USE_RAMDISK
|
|
memcpy(cur_cmd.data[cur_cmd.data_select],
|
|
ramdisk_buffer + cur_cmd.sector*SECTOR_SIZE,
|
|
MIN(READ_BUFFER_SIZE/SECTOR_SIZE, cur_cmd.count)*SECTOR_SIZE);
|
|
#else
|
|
result = storage_read_sectors(IF_MD(cur_cmd.lun,)
|
|
cur_cmd.sector,
|
|
MIN(READ_BUFFER_SIZE/SECTOR_SIZE, cur_cmd.count),
|
|
cur_cmd.data[cur_cmd.data_select]);
|
|
if(cur_cmd.last_result == 0)
|
|
cur_cmd.last_result = result;
|
|
|
|
#endif
|
|
}
|
|
}
|
|
/****************************************************************************/
|
|
|
|
static void handle_scsi(struct command_block_wrapper* cbw)
|
|
{
|
|
/* USB Mass Storage assumes LBA capability.
|
|
TODO: support 48-bit LBA */
|
|
|
|
struct storage_info info;
|
|
unsigned int length = cbw->data_transfer_length;
|
|
unsigned int block_size, block_count;
|
|
bool lun_present=true;
|
|
unsigned char lun = cbw->lun;
|
|
unsigned int block_size_mult = 1;
|
|
|
|
if(letoh32(cbw->signature) != CBW_SIGNATURE) {
|
|
logf("ums: bad cbw signature (%x)", cbw->signature);
|
|
usb_drv_stall(ep_in, true,true);
|
|
usb_drv_stall(ep_out, true,false);
|
|
return;
|
|
}
|
|
/* Clear the signature to prevent possible bugs elsewhere
|
|
* to trigger a second execution of the same command with
|
|
* bogus data */
|
|
cbw->signature=0;
|
|
|
|
#if defined(HAVE_MULTIDRIVE)
|
|
if(skip_first) lun++;
|
|
#endif
|
|
|
|
storage_get_info(lun,&info);
|
|
#ifdef USB_USE_RAMDISK
|
|
block_size = SECTOR_SIZE;
|
|
block_count = RAMDISK_SIZE;
|
|
#else
|
|
block_size=info.sector_size;
|
|
block_count=info.num_sectors;
|
|
#endif
|
|
|
|
#ifdef HAVE_HOTSWAP
|
|
if(storage_removable(lun) && !storage_present(lun)) {
|
|
ejected[lun] = true;
|
|
}
|
|
#endif
|
|
|
|
if(ejected[lun])
|
|
lun_present = false;
|
|
|
|
#ifdef MAX_LOG_SECTOR_SIZE
|
|
block_size_mult = disk_get_sector_multiplier(IF_MD(lun));
|
|
#endif
|
|
|
|
cur_cmd.tag = cbw->tag;
|
|
cur_cmd.lun = lun;
|
|
cur_cmd.cur_cmd = cbw->command_block[0];
|
|
|
|
switch (cbw->command_block[0]) {
|
|
case SCSI_TEST_UNIT_READY:
|
|
logf("scsi test_unit_ready %d",lun);
|
|
if(!usb_exclusive_storage()) {
|
|
send_csw(UMS_STATUS_FAIL);
|
|
cur_sense_data.sense_key=SENSE_NOT_READY;
|
|
cur_sense_data.asc=ASC_MEDIUM_NOT_PRESENT;
|
|
cur_sense_data.ascq=0;
|
|
break;
|
|
}
|
|
if(lun_present) {
|
|
send_csw(UMS_STATUS_GOOD);
|
|
}
|
|
else {
|
|
send_csw(UMS_STATUS_FAIL);
|
|
cur_sense_data.sense_key=SENSE_NOT_READY;
|
|
cur_sense_data.asc=ASC_MEDIUM_NOT_PRESENT;
|
|
cur_sense_data.ascq=0;
|
|
}
|
|
break;
|
|
|
|
case SCSI_REPORT_LUNS: {
|
|
logf("scsi report luns %d",lun);
|
|
unsigned int allocation_length=0;
|
|
int i;
|
|
unsigned int response_length = 8+8*storage_num_drives();
|
|
allocation_length|=(cbw->command_block[6]<<24);
|
|
allocation_length|=(cbw->command_block[7]<<16);
|
|
allocation_length|=(cbw->command_block[8]<<8);
|
|
allocation_length|=(cbw->command_block[9]);
|
|
memset(tb.lun_data,0,sizeof(struct report_lun_data));
|
|
tb.lun_data->lun_list_length=htobe32(8*storage_num_drives());
|
|
for(i=0;i<storage_num_drives();i++)
|
|
{
|
|
#ifdef HAVE_HOTSWAP
|
|
if(storage_removable(i))
|
|
tb.lun_data->luns[i][1]=1;
|
|
else
|
|
#endif
|
|
tb.lun_data->luns[i][1]=0;
|
|
}
|
|
length = MIN(length, allocation_length);
|
|
send_command_result(tb.lun_data,
|
|
MIN(response_length, length));
|
|
break;
|
|
}
|
|
|
|
case SCSI_INQUIRY:
|
|
logf("scsi inquiry %d",lun);
|
|
fill_inquiry(IF_MD(lun));
|
|
length = MIN(length, cbw->command_block[4]);
|
|
send_command_result(tb.inquiry,
|
|
MIN(sizeof(struct inquiry_data), length));
|
|
break;
|
|
|
|
case SCSI_REQUEST_SENSE: {
|
|
tb.sense_data->ResponseCode=0x70;/*current error*/
|
|
tb.sense_data->Obsolete=0;
|
|
tb.sense_data->fei_sensekey=cur_sense_data.sense_key&0x0f;
|
|
tb.sense_data->Information=cur_sense_data.information;
|
|
tb.sense_data->AdditionalSenseLength=10;
|
|
tb.sense_data->CommandSpecificInformation=0;
|
|
tb.sense_data->AdditionalSenseCode=cur_sense_data.asc;
|
|
tb.sense_data->AdditionalSenseCodeQualifier=cur_sense_data.ascq;
|
|
tb.sense_data->FieldReplaceableUnitCode=0;
|
|
tb.sense_data->SKSV=0;
|
|
tb.sense_data->SenseKeySpecific=0;
|
|
logf("scsi request_sense %d",lun);
|
|
send_command_result(tb.sense_data,
|
|
MIN(sizeof(struct sense_data), length));
|
|
break;
|
|
}
|
|
|
|
case SCSI_MODE_SENSE_10: {
|
|
if(!lun_present) {
|
|
send_command_failed_result();
|
|
cur_sense_data.sense_key=SENSE_NOT_READY;
|
|
cur_sense_data.asc=ASC_MEDIUM_NOT_PRESENT;
|
|
cur_sense_data.ascq=0;
|
|
break;
|
|
}
|
|
/*unsigned char pc = (cbw->command_block[2] & 0xc0) >>6;*/
|
|
unsigned char page_code = cbw->command_block[2] & 0x3f;
|
|
logf("scsi mode_sense_10 %d %X",lun,page_code);
|
|
switch(page_code) {
|
|
case 0x3f:
|
|
tb.ms_data_10->mode_data_length =
|
|
htobe16(sizeof(struct mode_sense_data_10)-2);
|
|
tb.ms_data_10->medium_type = 0;
|
|
tb.ms_data_10->device_specific = 0;
|
|
tb.ms_data_10->reserved = 0;
|
|
tb.ms_data_10->longlba = 1;
|
|
tb.ms_data_10->block_descriptor_length =
|
|
htobe16(sizeof(struct mode_sense_bdesc_longlba));
|
|
|
|
memset(tb.ms_data_10->block_descriptor.reserved,0,4);
|
|
memset(tb.ms_data_10->block_descriptor.num_blocks,0,8);
|
|
|
|
tb.ms_data_10->block_descriptor.num_blocks[4] =
|
|
((block_count/block_size_mult) & 0xff000000)>>24;
|
|
tb.ms_data_10->block_descriptor.num_blocks[5] =
|
|
((block_count/block_size_mult) & 0x00ff0000)>>16;
|
|
tb.ms_data_10->block_descriptor.num_blocks[6] =
|
|
((block_count/block_size_mult) & 0x0000ff00)>>8;
|
|
tb.ms_data_10->block_descriptor.num_blocks[7] =
|
|
((block_count/block_size_mult) & 0x000000ff);
|
|
|
|
tb.ms_data_10->block_descriptor.block_size[0] =
|
|
((block_size*block_size_mult) & 0xff000000)>>24;
|
|
tb.ms_data_10->block_descriptor.block_size[1] =
|
|
((block_size*block_size_mult) & 0x00ff0000)>>16;
|
|
tb.ms_data_10->block_descriptor.block_size[2] =
|
|
((block_size*block_size_mult) & 0x0000ff00)>>8;
|
|
tb.ms_data_10->block_descriptor.block_size[3] =
|
|
((block_size*block_size_mult) & 0x000000ff);
|
|
send_command_result(tb.ms_data_10,
|
|
MIN(sizeof(struct mode_sense_data_10), length));
|
|
break;
|
|
default:
|
|
send_command_failed_result();
|
|
cur_sense_data.sense_key=SENSE_ILLEGAL_REQUEST;
|
|
cur_sense_data.asc=ASC_INVALID_FIELD_IN_CBD;
|
|
cur_sense_data.ascq=0;
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
|
|
case SCSI_MODE_SENSE_6: {
|
|
if(!lun_present) {
|
|
send_command_failed_result();
|
|
cur_sense_data.sense_key=SENSE_NOT_READY;
|
|
cur_sense_data.asc=ASC_MEDIUM_NOT_PRESENT;
|
|
cur_sense_data.ascq=0;
|
|
break;
|
|
}
|
|
/*unsigned char pc = (cbw->command_block[2] & 0xc0) >>6;*/
|
|
unsigned char page_code = cbw->command_block[2] & 0x3f;
|
|
logf("scsi mode_sense_6 %d %X",lun,page_code);
|
|
switch(page_code) {
|
|
case 0x3f:
|
|
/* All supported pages. */
|
|
tb.ms_data_6->mode_data_length =
|
|
sizeof(struct mode_sense_data_6)-1;
|
|
tb.ms_data_6->medium_type = 0;
|
|
tb.ms_data_6->device_specific = 0;
|
|
tb.ms_data_6->block_descriptor_length =
|
|
sizeof(struct mode_sense_bdesc_shortlba);
|
|
tb.ms_data_6->block_descriptor.density_code = 0;
|
|
tb.ms_data_6->block_descriptor.reserved = 0;
|
|
if(block_count/block_size_mult > 0xffffff) {
|
|
tb.ms_data_6->block_descriptor.num_blocks[0] = 0xff;
|
|
tb.ms_data_6->block_descriptor.num_blocks[1] = 0xff;
|
|
tb.ms_data_6->block_descriptor.num_blocks[2] = 0xff;
|
|
}
|
|
else {
|
|
tb.ms_data_6->block_descriptor.num_blocks[0] =
|
|
((block_count/block_size_mult) & 0xff0000)>>16;
|
|
tb.ms_data_6->block_descriptor.num_blocks[1] =
|
|
((block_count/block_size_mult) & 0x00ff00)>>8;
|
|
tb.ms_data_6->block_descriptor.num_blocks[2] =
|
|
((block_count/block_size_mult) & 0x0000ff);
|
|
}
|
|
tb.ms_data_6->block_descriptor.block_size[0] =
|
|
((block_size*block_size_mult) & 0xff0000)>>16;
|
|
tb.ms_data_6->block_descriptor.block_size[1] =
|
|
((block_size*block_size_mult) & 0x00ff00)>>8;
|
|
tb.ms_data_6->block_descriptor.block_size[2] =
|
|
((block_size*block_size_mult) & 0x0000ff);
|
|
send_command_result(tb.ms_data_6,
|
|
MIN(sizeof(struct mode_sense_data_6), length));
|
|
break;
|
|
default:
|
|
send_command_failed_result();
|
|
cur_sense_data.sense_key=SENSE_ILLEGAL_REQUEST;
|
|
cur_sense_data.asc=ASC_INVALID_FIELD_IN_CBD;
|
|
cur_sense_data.ascq=0;
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
|
|
case SCSI_START_STOP_UNIT:
|
|
logf("scsi start_stop unit %d",lun);
|
|
if((cbw->command_block[4] & 0xf0) == 0) /*load/eject bit is valid*/
|
|
{ /* Process start and eject bits */
|
|
logf("scsi load/eject");
|
|
if((cbw->command_block[4] & 0x01) == 0) /* Don't start */
|
|
{
|
|
if((cbw->command_block[4] & 0x02) != 0) /* eject */
|
|
{
|
|
logf("scsi eject");
|
|
ejected[lun]=true;
|
|
}
|
|
}
|
|
}
|
|
send_csw(UMS_STATUS_GOOD);
|
|
break;
|
|
|
|
case SCSI_ALLOW_MEDIUM_REMOVAL:
|
|
logf("scsi allow_medium_removal %d",lun);
|
|
if((cbw->command_block[4] & 0x03) == 0) {
|
|
locked[lun]=false;
|
|
queue_broadcast(SYS_USB_LUN_LOCKED, (lun<<16)+0);
|
|
}
|
|
else {
|
|
locked[lun]=true;
|
|
queue_broadcast(SYS_USB_LUN_LOCKED, (lun<<16)+1);
|
|
}
|
|
send_csw(UMS_STATUS_GOOD);
|
|
break;
|
|
|
|
case SCSI_READ_FORMAT_CAPACITY: {
|
|
logf("scsi read_format_capacity %d",lun);
|
|
if(lun_present) {
|
|
tb.format_capacity_data->following_length=htobe32(8);
|
|
/* "block count" actually means "number of last block" */
|
|
tb.format_capacity_data->block_count =
|
|
htobe32(block_count/block_size_mult - 1);
|
|
tb.format_capacity_data->block_size =
|
|
htobe32(block_size*block_size_mult);
|
|
tb.format_capacity_data->block_size |=
|
|
htobe32(SCSI_FORMAT_CAPACITY_FORMATTED_MEDIA);
|
|
|
|
send_command_result(tb.format_capacity_data,
|
|
MIN(sizeof(struct format_capacity), length));
|
|
}
|
|
else {
|
|
send_command_failed_result();
|
|
cur_sense_data.sense_key=SENSE_NOT_READY;
|
|
cur_sense_data.asc=ASC_MEDIUM_NOT_PRESENT;
|
|
cur_sense_data.ascq=0;
|
|
}
|
|
break;
|
|
}
|
|
|
|
case SCSI_READ_CAPACITY: {
|
|
logf("scsi read_capacity %d",lun);
|
|
|
|
if(lun_present) {
|
|
/* "block count" actually means "number of last block" */
|
|
tb.capacity_data->block_count =
|
|
htobe32(block_count/block_size_mult - 1);
|
|
tb.capacity_data->block_size =
|
|
htobe32(block_size*block_size_mult);
|
|
|
|
send_command_result(tb.capacity_data,
|
|
MIN(sizeof(struct capacity), length));
|
|
}
|
|
else {
|
|
send_command_failed_result();
|
|
cur_sense_data.sense_key=SENSE_NOT_READY;
|
|
cur_sense_data.asc=ASC_MEDIUM_NOT_PRESENT;
|
|
cur_sense_data.ascq=0;
|
|
}
|
|
break;
|
|
}
|
|
|
|
case SCSI_READ_10:
|
|
logf("scsi read10 %d",lun);
|
|
if(!lun_present) {
|
|
send_command_failed_result();
|
|
cur_sense_data.sense_key=SENSE_NOT_READY;
|
|
cur_sense_data.asc=ASC_MEDIUM_NOT_PRESENT;
|
|
cur_sense_data.ascq=0;
|
|
break;
|
|
}
|
|
cur_cmd.data[0] = tb.transfer_buffer;
|
|
cur_cmd.data[1] = &tb.transfer_buffer[READ_BUFFER_SIZE];
|
|
cur_cmd.data_select=0;
|
|
cur_cmd.sector = block_size_mult *
|
|
(cbw->command_block[2] << 24 |
|
|
cbw->command_block[3] << 16 |
|
|
cbw->command_block[4] << 8 |
|
|
cbw->command_block[5] );
|
|
cur_cmd.count = block_size_mult *
|
|
(cbw->command_block[7] << 8 |
|
|
cbw->command_block[8]);
|
|
cur_cmd.orig_count = cur_cmd.count;
|
|
|
|
//logf("scsi read %d %d", cur_cmd.sector, cur_cmd.count);
|
|
|
|
if((cur_cmd.sector + cur_cmd.count) > block_count) {
|
|
send_csw(UMS_STATUS_FAIL);
|
|
cur_sense_data.sense_key=SENSE_ILLEGAL_REQUEST;
|
|
cur_sense_data.asc=ASC_LBA_OUT_OF_RANGE;
|
|
cur_sense_data.ascq=0;
|
|
}
|
|
else {
|
|
#ifdef USB_USE_RAMDISK
|
|
memcpy(cur_cmd.data[cur_cmd.data_select],
|
|
ramdisk_buffer + cur_cmd.sector*SECTOR_SIZE,
|
|
MIN(READ_BUFFER_SIZE/SECTOR_SIZE,cur_cmd.count)*SECTOR_SIZE);
|
|
#else
|
|
cur_cmd.last_result = storage_read_sectors(IF_MD(cur_cmd.lun,)
|
|
cur_cmd.sector,
|
|
MIN(READ_BUFFER_SIZE/SECTOR_SIZE, cur_cmd.count),
|
|
cur_cmd.data[cur_cmd.data_select]);
|
|
#endif
|
|
send_and_read_next();
|
|
}
|
|
break;
|
|
|
|
case SCSI_WRITE_10:
|
|
logf("scsi write10 %d",lun);
|
|
if(!lun_present) {
|
|
send_csw(UMS_STATUS_FAIL);
|
|
cur_sense_data.sense_key=SENSE_NOT_READY;
|
|
cur_sense_data.asc=ASC_MEDIUM_NOT_PRESENT;
|
|
cur_sense_data.ascq=0;
|
|
break;
|
|
}
|
|
cur_cmd.data[0] = tb.transfer_buffer;
|
|
cur_cmd.data[1] = &tb.transfer_buffer[WRITE_BUFFER_SIZE];
|
|
cur_cmd.data_select=0;
|
|
cur_cmd.sector = block_size_mult *
|
|
(cbw->command_block[2] << 24 |
|
|
cbw->command_block[3] << 16 |
|
|
cbw->command_block[4] << 8 |
|
|
cbw->command_block[5] );
|
|
cur_cmd.count = block_size_mult *
|
|
(cbw->command_block[7] << 8 |
|
|
cbw->command_block[8]);
|
|
cur_cmd.orig_count = cur_cmd.count;
|
|
|
|
/* expect data */
|
|
if((cur_cmd.sector + cur_cmd.count) > block_count) {
|
|
send_csw(UMS_STATUS_FAIL);
|
|
cur_sense_data.sense_key=SENSE_ILLEGAL_REQUEST;
|
|
cur_sense_data.asc=ASC_LBA_OUT_OF_RANGE;
|
|
cur_sense_data.ascq=0;
|
|
}
|
|
else {
|
|
receive_block_data(cur_cmd.data[0],
|
|
MIN(WRITE_BUFFER_SIZE, cur_cmd.count*SECTOR_SIZE));
|
|
}
|
|
break;
|
|
|
|
#if CONFIG_RTC
|
|
case SCSI_WRITE_BUFFER:
|
|
if(cbw->command_block[1]==1 /* mode = vendor specific */
|
|
&& cbw->command_block[2]==0 /* buffer id = 0 */
|
|
|
|
&& cbw->command_block[3]==0x0c /* offset (3 bytes) */
|
|
&& cbw->command_block[4]==0
|
|
&& cbw->command_block[5]==0
|
|
|
|
/* Some versions of itunes set the parameter list length to 0.
|
|
* Technically it should be 0x0c, which is what libgpod sends */
|
|
&& cbw->command_block[6]==0 /* parameter list (3 bytes) */
|
|
&& cbw->command_block[7]==0
|
|
&& (cbw->command_block[8]==0 || cbw->command_block[8]==0x0c)
|
|
|
|
&& cbw->command_block[9]==0)
|
|
receive_time();
|
|
break;
|
|
#endif /* CONFIG_RTC */
|
|
|
|
default:
|
|
logf("scsi unknown cmd %x",cbw->command_block[0x0]);
|
|
send_csw(UMS_STATUS_FAIL);
|
|
cur_sense_data.sense_key=SENSE_ILLEGAL_REQUEST;
|
|
cur_sense_data.asc=ASC_INVALID_COMMAND;
|
|
cur_sense_data.ascq=0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void send_block_data(void *data,int size)
|
|
{
|
|
usb_drv_send_nonblocking(ep_in, data,size);
|
|
state = SENDING_BLOCKS;
|
|
}
|
|
|
|
static void send_command_result(void *data,int size)
|
|
{
|
|
usb_drv_send_nonblocking(ep_in, data,size);
|
|
state = SENDING_RESULT;
|
|
}
|
|
|
|
static void send_command_failed_result(void)
|
|
{
|
|
usb_drv_send_nonblocking(ep_in, NULL, 0);
|
|
state = SENDING_FAILED_RESULT;
|
|
}
|
|
|
|
#if CONFIG_RTC
|
|
static void receive_time(void)
|
|
{
|
|
usb_drv_recv(ep_out, tb.transfer_buffer, 12);
|
|
state = RECEIVING_TIME;
|
|
}
|
|
#endif /* CONFIG_RTC */
|
|
|
|
static void receive_block_data(void *data,int size)
|
|
{
|
|
usb_drv_recv(ep_out, data, size);
|
|
state = RECEIVING_BLOCKS;
|
|
}
|
|
|
|
static void send_csw(int status)
|
|
{
|
|
tb.csw->signature = htole32(CSW_SIGNATURE);
|
|
tb.csw->tag = cur_cmd.tag;
|
|
tb.csw->data_residue = 0;
|
|
tb.csw->status = status;
|
|
|
|
usb_drv_send_nonblocking(ep_in, tb.csw,
|
|
sizeof(struct command_status_wrapper));
|
|
state = WAITING_FOR_CSW_COMPLETION_OR_COMMAND;
|
|
//logf("CSW: %X",status);
|
|
/* Already start waiting for the next command */
|
|
usb_drv_recv(ep_out, cbw_buffer, MAX_CBW_SIZE);
|
|
/* The next completed transfer will be either the CSW one
|
|
* or the new command */
|
|
|
|
if(status == UMS_STATUS_GOOD) {
|
|
cur_sense_data.sense_key=0;
|
|
cur_sense_data.information=0;
|
|
cur_sense_data.asc=0;
|
|
cur_sense_data.ascq=0;
|
|
}
|
|
}
|
|
|
|
static void copy_padded(char *dest, char *src, int len)
|
|
{
|
|
for (int i = 0; i < len; i++) {
|
|
if (src[i] == '\0') {
|
|
memset(&dest[i], ' ', len - i);
|
|
return;
|
|
}
|
|
dest[i] = src[i];
|
|
}
|
|
}
|
|
|
|
/* build SCSI INQUIRY */
|
|
static void fill_inquiry(IF_MD_NONVOID(int lun))
|
|
{
|
|
struct storage_info info;
|
|
memset(tb.inquiry, 0, sizeof(struct inquiry_data));
|
|
storage_get_info(lun,&info);
|
|
copy_padded(tb.inquiry->VendorId,info.vendor,sizeof(tb.inquiry->VendorId));
|
|
copy_padded(tb.inquiry->ProductId,info.product,sizeof(tb.inquiry->ProductId));
|
|
copy_padded(tb.inquiry->ProductRevisionLevel,info.revision,sizeof(tb.inquiry->ProductRevisionLevel));
|
|
|
|
tb.inquiry->DeviceType = DIRECT_ACCESS_DEVICE;
|
|
tb.inquiry->AdditionalLength = 0x1f;
|
|
memset(tb.inquiry->Reserved, 0, 3);
|
|
tb.inquiry->Versions = 4; /* SPC-2 */
|
|
tb.inquiry->Format = 2; /* SPC-2/3 inquiry format */
|
|
|
|
tb.inquiry->DeviceTypeModifier = DEVICE_REMOVABLE;
|
|
}
|