rockbox/firmware/export
Michael Sevakis 514f45bc1c Changed #ifdef USE_IRAM to #ifdef IRAM_STEAL. Also want to check if results are the same again since another person also built a red one successfully.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11545 a1c6a512-1295-4272-9138-f99709370657
2006-11-18 03:06:46 +00:00
..
adc.h Target tree support for Iriver iFP. 2006-11-09 22:58:35 +00:00
ata.h * changes to ata.c - idle callbacks are called after 2 sec of real idle, 2006-11-08 01:55:26 +00:00
ata_idle_notify.h fixed once again. 2006-11-08 03:19:53 +00:00
ata_mmc.h
audio.h Changed #ifdef USE_IRAM to #ifdef IRAM_STEAL. Also want to check if results are the same again since another person also built a red one successfully. 2006-11-18 03:06:46 +00:00
backlight.h Removed the settings #defines from backlight.h since they are now in the players' config files. 2006-11-10 01:30:09 +00:00
bidi.h waiting is over: initial unicode commit 2005-12-06 13:27:15 +00:00
bitswap.h
buffer.h
button.h Removed the Gmini 120 and Gmini SP code. These ports are dead, unfortunately. 2006-11-10 20:26:01 +00:00
config-e200.h Correct LCD pixel format on Sansa E200 2006-10-26 20:01:04 +00:00
config-fmrecorder.h ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel 2006-10-25 10:17:57 +00:00
config-gigabeat.h ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel 2006-10-25 10:17:57 +00:00
config-h10.h Fixed H10 build. 2006-11-09 22:33:24 +00:00
config-h10_5gb.h Fixed H10 build. 2006-11-09 22:33:24 +00:00
config-h100.h Coldfire targets: Got the rest of the coldfire code out of backlight.c. Straightened up related items in configs and split backlight_set_brightness between the normal and boot/sim builds like the other functions. Should really have done all that in the first place. 2006-11-10 18:47:41 +00:00
config-h120.h Coldfire targets: Got the rest of the coldfire code out of backlight.c. Straightened up related items in configs and split backlight_set_brightness between the normal and boot/sim builds like the other functions. Should really have done all that in the first place. 2006-11-10 18:47:41 +00:00
config-h300.h Coldfire targets: Got the rest of the coldfire code out of backlight.c. Straightened up related items in configs and split backlight_set_brightness between the normal and boot/sim builds like the other functions. Should really have done all that in the first place. 2006-11-10 18:47:41 +00:00
config-iaudiox5.h Coldfire targets: Got the rest of the coldfire code out of backlight.c. Straightened up related items in configs and split backlight_set_brightness between the normal and boot/sim builds like the other functions. Should really have done all that in the first place. 2006-11-10 18:47:41 +00:00
config-ifp7xx.h Forgot to add new files for iFP move to target tree. 2006-11-10 07:43:36 +00:00
config-ipod3g.h Added macros controlling what goes to IRAM on different targets. 2006-11-09 21:59:27 +00:00
config-ipod4g.h Added macros controlling what goes to IRAM on different targets. 2006-11-09 21:59:27 +00:00
config-ipodcolor.h Added macros controlling what goes to IRAM on different targets. 2006-11-09 21:59:27 +00:00
config-ipodmini.h Added macros controlling what goes to IRAM on different targets. 2006-11-09 21:59:27 +00:00
config-ipodmini2g.h Added macros controlling what goes to IRAM on different targets. 2006-11-09 21:59:27 +00:00
config-ipodnano.h Added macros controlling what goes to IRAM on different targets. 2006-11-09 21:59:27 +00:00
config-ipodvideo.h Added macros controlling what goes to IRAM on different targets. 2006-11-09 21:59:27 +00:00
config-ondiofm.h ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel 2006-10-25 10:17:57 +00:00
config-ondiosp.h ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel 2006-10-25 10:17:57 +00:00
config-player.h ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel 2006-10-25 10:17:57 +00:00
config-recorder.h ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel 2006-10-25 10:17:57 +00:00
config-recorderv2.h ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel 2006-10-25 10:17:57 +00:00
config-tpj1022.h Initial commit of work for port to the Tatung Elio TPJ-1022 - yet another PortalPlayer PP5020 target. 2006-08-31 19:19:35 +00:00
config.h SWCODEC/IRAM: Save voice IRAM when a plugin initializes its IRAM. Defines two macros for declaring and initializing IRAM. Plugins should use these instead. See mp3_encoder, doom, etc. for details. Further tweaks in buffer restoration after other use. Hiding of some interfaces that should only be used by buffer management. 2006-11-18 02:18:29 +00:00
cpu.h Removed the Gmini 120 and Gmini SP code. These ports are dead, unfortunately. 2006-11-10 20:26:01 +00:00
debug.h Support building tagcache db natively on PC using the core of the 2006-11-10 08:03:33 +00:00
disk.h
eeprom_24cxx.h eeprom driver for the h3x0 series, cleaned up the h1x0 series driver a bit, added debug entry for h3x0 that allows to write to the eeprom 2006-08-15 22:54:06 +00:00
eeprom_settings.h Bootloader support to search firmware also from flash. Bootloader <-> 2006-08-09 12:04:13 +00:00
enc_base.h Forgot to use cvs add on a few new files in the fresh checkout I used. woops. 2006-11-06 18:18:05 +00:00
fat.h Applied FS# 5736 by Alexander Levin. 2006-07-31 22:59:45 +00:00
fmradio.h Added FS#2939 Encoder Codec Interface + Codecs by Antonius Hellmann with additional FM Recording support and my modifications 2006-08-28 22:38:41 +00:00
fmradio_i2c.h Patch #5347 by Rani Hod - Adds FM radio and recording features to the iAudio X5. 2006-07-21 08:42:28 +00:00
font.h waiting is over: initial unicode commit 2005-12-06 13:27:15 +00:00
gdb_api.h Mapped iFP DRAM to 0xc00000 and enabled caching in this area. 2006-02-12 23:16:05 +00:00
general.h Forgot to use cvs add on a few new files in the fresh checkout I used. woops. 2006-11-06 18:18:05 +00:00
generic_i2c.h Generic bitbang I2C driver 2006-02-22 14:50:57 +00:00
hangul.h Add support for loadable vkeyboard layouts 2006-03-29 16:21:42 +00:00
hwcompat.h
i2c-coldfire.h Patch #5347 by Rani Hod - Adds FM radio and recording features to the iAudio X5. 2006-07-21 08:42:28 +00:00
i2c-pp5002.h Renamed the ipod_i2c functions to the more appropriate pp_i2c 2006-10-27 11:24:23 +00:00
i2c-pp5020.h Renamed the ipod_i2c functions to the more appropriate pp_i2c 2006-10-27 11:24:23 +00:00
i2c.h
id3.h AIFF is not (yet) a supported format on HWCODEC targets. 2006-11-06 19:49:05 +00:00
isp1362.h H300: Rudimentary driver for the ISP1362 USB on-the-go controller. For now it just sends the chip to sleep, solving the poor battery runtime issue. 2006-06-16 17:34:18 +00:00
kernel.h Patch #6052 - More responsive skip on Archos 2006-10-19 11:43:13 +00:00
lcd-player-charset.h
lcd-remote.h Removed anachronisms introduced with low battery shutdown patch. 2006-11-14 02:46:59 +00:00
lcd.h Backdrop support for greyscale targets. WPS backdrop is untested. 2006-11-13 00:45:21 +00:00
led.h removed old statusbar and buttonbar code 2005-11-20 01:02:14 +00:00
logf.h Support building tagcache db natively on PC using the core of the 2006-11-10 08:03:33 +00:00
m5636.h Patch #5639 by Ulrich Pegelow, inits the M5636 USBOTG chip on the X5 to reduce the battery consumption. 2006-07-13 07:40:30 +00:00
mas.h Renamed CONFIG_HWCODEC and MASNONE to the more appropriate CONFIG_CODEC and SWCODEC, respectively. 2005-08-29 21:15:27 +00:00
mcf5249.h H300: (1) Use DMA for LCD updates, with auto-aligned line reads. Speeds up LCD updates by ~ 75% at 11MHz and 45MHz. Only ~ 11% speedup at 124MHz due to (2). (2) Less aggressive LCD transfer timing at 124MHz. With the previous timing, slightly corrupted display contents was reported, and with DMA transfers at least 4 waitstates are needed to make updates work at all. * A table in system-iriver.c shows settings for all integer multiples of the base clock frequency (info for developers, not yet complete). 2006-11-02 20:50:50 +00:00
mcf5250.h Some corrections for MCF5250 2006-02-22 20:48:27 +00:00
mp3_playback.h Renamed CONFIG_HWCODEC and MASNONE to the more appropriate CONFIG_CODEC and SWCODEC, respectively. 2005-08-29 21:15:27 +00:00
mp3data.h Archos recording/playback: (1) Xing header creation: * Now estimates the framecount from the recording time if the MAS frame counter saturates, so it always writes a valid Xing header. * Reverted my brainless short-xing-header change. This was only valid for layer 3. (2) Xing/VBRI header evaluation: Fixed possible overflow in bitrate calculation. (3) MPEG thread: Avoid double chunk size limiting for the rare case of 8 MB modded Ondios. 2005-09-15 05:29:26 +00:00
mpeg.h iRiver: Initial support for wav-recording in recording menu. Supports mic/line-in (and radio), monitor mode, time-splitting (and byte-splitting), pause/resume etc. Things todo: Prerecording, peakmeter (should be simple), frequency other than 44.1 kHz, etc.. 2005-11-12 04:00:56 +00:00
panic.h
pcf50605.h Move all iPod targets into the target tree. FS#5890 2006-10-05 10:58:51 +00:00
pcf50606.h Moved pcf50606 stuff to target directory. 2006-10-25 23:24:07 +00:00
pcm_playback.h Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs. 2006-11-06 18:07:30 +00:00
pcm_record.h Removed anachronisms introduced with low battery shutdown patch. 2006-11-14 02:46:59 +00:00
pcm_sampr.h Forgot to use cvs add on a few new files in the fresh checkout I used. woops. 2006-11-06 18:18:05 +00:00
pnx0101.h Iriver iFP7xx sound support. 2006-08-12 21:03:23 +00:00
power.h H100/General: HAL for S/PDIF and refinement/bufixes in optical output powering/source selection. 2006-11-13 23:21:54 +00:00
powermgmt.h Improved power management (FS#3001). Shutdown rockbox when the battery gets to a level where the device doesn't function properly. Calculate remaining charging time while charging (rather than remaining running time). Show "Low Battery" and "Battery Empty" warnings. Also fixes FS#4786. 2006-11-11 01:18:57 +00:00
pp5002.h Initial work for coprocessor support on iPods. FS#5755 2006-08-03 16:29:42 +00:00
pp5020.h Detect charger connected on H10. No need to sleep(HZ) when powering off. 2006-09-20 23:21:59 +00:00
pp5024.h added mostly dummy changes to allow building of a Sansa e200 bootloader 2006-08-01 22:28:14 +00:00
profile.h Fix profile builds 2006-08-24 13:10:20 +00:00
replaygain.h Add support for parsing binary data ID3 tags. Add support for parsing RVA2 ID3 tags for replaygain values instead of TXXX tags when playing files tagged with ID3v2.4. Patch by psyche78 (task #2937) 2006-07-20 10:35:20 +00:00
rolo.h
rtc.h Real Time Clock support in the WPS 2006-03-18 22:42:02 +00:00
s3c2440.h fix typo 2006-11-05 07:55:00 +00:00
serial.h Logf output on the serial port for h100 targets 2006-10-12 20:22:16 +00:00
sh7034.h SH1: Changed UIE() to use the same reset method as on coldfire, using the watchdog timer. Should be more reliable this way. Disabled LED handling and added reboot-with-on for Ondio. * All: #ifdef cleanup in panicf(), added reboot-with-on for Ondio. 2005-11-09 00:54:43 +00:00
sound.h Patch #5347 by Rani Hod - Adds FM radio and recording features to the iAudio X5. 2006-07-21 08:42:28 +00:00
spdif.h H100/General: HAL for S/PDIF and refinement/bufixes in optical output powering/source selection. 2006-11-13 23:21:54 +00:00
system.h Removed the Gmini 120 and Gmini SP code. These ports are dead, unfortunately. 2006-11-10 20:26:01 +00:00
thread.h Thread API enhancements. 2006-11-11 05:33:24 +00:00
timer.h Simplification for user timer on coldfire. We define TIMER_FREQ separately anyway. 2006-04-04 01:16:11 +00:00
tlv320.h Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs. 2006-11-06 18:07:30 +00:00
tuner.h Implement region setting for the fm tuner. The region setting affects deemphasis, band limits and step size. Fixes FS#5929, FS#5928. 2006-10-05 12:40:13 +00:00
uda1380.h Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs. 2006-11-06 18:07:30 +00:00
usb.h H300 bootloader USB mode 2005-12-06 12:12:29 +00:00
usb_serial.h Added non-blocking get/put_byte routines. 2006-02-03 23:28:53 +00:00
wm8731l.h Move definitions to their proper place 2006-03-30 20:48:15 +00:00
wm8758.h Add support for displaying the the current path or the full path (or neither) in the file browser. Check General Settings -> File View -> Show Path for the options. 2006-08-15 09:38:13 +00:00
wm8975.h Fixed line out volume for 4G, Nano and 5G Ipods. Partial patch #4814 by 2006-03-22 13:04:49 +00:00
wmcodec.h generalise the wolfson codec code a bit 2006-10-20 17:12:42 +00:00