Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/rk27xx/sd-rk27xx.c
Michael Sevakis a56f1ca1ed Cleanup MV/MD macros a little. 
When using variadic macros there's no need for IF_MD2/IF_MV2 to deal
with function parameters. IF_MD/IF_MV are enough.

Throw in IF_MD_DRV/ID_MV_VOL that return the parameter if MD/MV, or 0
if not.

Change-Id: I7605e6039f3be19cb47110c84dcb3c5516f2c3eb
2013-08-17 12:18:22 -04:00

801 lines
20 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 Daniel Ankers
* Copyright © 2008-2009 Rafaël Carré
* Copyright (C) 2011 Marcin Bukat
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h" /* for HAVE_MULTIVOLUME */
#include "fat.h"
#include "thread.h"
#include "gcc_extensions.h"
#include "led.h"
#include "sdmmc.h"
#include "system.h"
#include "kernel.h"
#include "cpu.h"
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "panic.h"
#include "stdbool.h"
#include "ata_idle_notify.h"
#include "sd.h"
#include "usb.h"
#ifdef HAVE_HOTSWAP
#include "disk.h"
#endif
#include "lcd.h"
#include <stdarg.h>
#include "sysfont.h"
#define RES_NO (-1)
/* debug stuff */
unsigned long sd_debug_time_rd = 0;
unsigned long sd_debug_time_wr = 0;
static tCardInfo card_info;
/* for compatibility */
static long last_disk_activity = -1;
static long sd_stack [(DEFAULT_STACK_SIZE*2 + 0x200)/sizeof(long)];
static const char sd_thread_name[] = "ata/sd";
static struct mutex sd_mtx SHAREDBSS_ATTR;
static struct event_queue sd_queue;
#ifndef BOOTLOADER
bool sd_enabled = false;
#endif
static struct semaphore transfer_completion_signal;
static struct semaphore command_completion_signal;
static volatile bool retry;
static volatile int cmd_error;
/* interrupt handler for SD */
void INT_SD(void)
{
const int status = SD_INT;
SD_INT = 0; /* disable sd interrupts, clear pending interrupts */
/* cmd and response status pending */
if(status & CMD_RES_STAT)
{
/* get the status */
cmd_error = SD_CMDRES;
semaphore_release(&command_completion_signal);
}
/* data transfer status pending */
if(status & DATA_XFER_STAT)
{
cmd_error = SD_DATAT;
if (cmd_error & DATA_XFER_ERR)
retry = true;
semaphore_release(&transfer_completion_signal);
}
SD_INT = CMD_RES_INT_EN | DATA_XFER_INT_EN;
}
/* Exchange buffers - the one where SD module puts into/reads from
* data and the one controlled by MCU. This allows some overlap
* in transfer operations and should increase throuput.
*/
static void mmu_switch_buff(void)
{
static unsigned int i = 0;
if (i++ & 0x01)
{
MMU_CTRL = MMU_MMU0_BUFII | MMU_CPU_BUFI | MMU_BUFII_RESET |
MMU_BUFII_BYTE | MMU_BUFI_RESET | MMU_BUFI_WORD;
}
else
{
MMU_CTRL = MMU_MMU0_BUFI | MMU_CPU_BUFII | MMU_BUFII_RESET |
MMU_BUFII_WORD | MMU_BUFI_RESET | MMU_BUFI_BYTE;
}
}
/* Reset internal pointers of the MMU submodule */
static void mmu_buff_reset(void)
{
MMU_CTRL |= MMU_BUFII_RESET | MMU_BUFI_RESET;
}
static inline bool card_detect_target(void)
{
#if defined(RK27_GENERIC)
/* My generic device uses PC7 pin, active low */
return !(GPIO_PCDR & 0x80);
#elif defined(HM60X) || defined(HM801)
return !(GPIO_PFDR & (1<<2));
#elif defined(MA9)
return (GPIO_PCDR & 0x80);
#else
#error "Unknown target"
#endif
}
/* Send command to the SD card. Command finish is signaled in ISR */
static bool send_cmd(const int cmd, const int arg, const int res,
unsigned long *response)
{
SD_CMD = arg;
if (res > 0)
SD_CMDREST = CMD_XFER_START | RES_XFER_START | res | cmd;
else
SD_CMDREST = CMD_XFER_START | RES_XFER_END | RES_R1 | cmd;
semaphore_wait(&command_completion_signal, TIMEOUT_BLOCK);
/* Handle command responses & errors */
if(res != RES_NO)
{
if(cmd_error & STAT_CMD_RES_ERR)
return false;
if(res == RES_R2)
{
response[0] = SD_RES3;
response[1] = SD_RES2;
response[2] = SD_RES1;
response[3] = SD_RES0;
}
else
response[0] = SD_RES3;
}
return true;
}
#if 0
/* for some misterious reason the card does not report itself as being in TRAN
* but transfers are successful. Rockchip OF does not check the card state
* after SELECT. I checked two different cards.
*/
static void print_card_status(void)
{
unsigned long response;
send_cmd(SD_SEND_STATUS, card_info.rca, RES_R1,
&response);
printf("card status: 0x%0x, state: 0x%0x", response, (response>>9)&0xf);
}
static int sd_wait_for_tran_state(void)
{
unsigned long response;
unsigned int timeout = current_tick + 5*HZ;
int cmd_retry = 10;
while (1)
{
while (!send_cmd(SD_SEND_STATUS, card_info.rca, RES_R1,
&response) && cmd_retry > 0)
{
cmd_retry--;
}
if (cmd_retry <= 0)
{
return -1;
}
if (((response >> 9) & 0xf) == SD_TRAN)
{
return 0;
}
if(TIME_AFTER(current_tick, timeout))
{
return -10 * ((response >> 9) & 0xf);
}
last_disk_activity = current_tick;
}
}
#endif
static bool sd_wait_card_busy(void)
{
unsigned int timeout = current_tick + 5*HZ;
while (!(SD_CARD & SD_CARD_BSY))
{
if(TIME_AFTER(current_tick, timeout))
return false;
}
return true;
}
static int sd_init_card(void)
{
unsigned long response;
long init_timeout;
bool sd_v2 = false;
card_info.rca = 0;
/* assume 50 MHz APB freq / 125 = 400 kHz */
SD_CTRL = (SD_CTRL & ~(0x7FF)) | 0x7D;
/* 100 - 400kHz clock required for Identification Mode */
/* Start of Card Identification Mode ************************************/
/* CMD0 Go Idle */
if(!send_cmd(SD_GO_IDLE_STATE, 0, RES_NO, NULL))
return -1;
sleep(1);
/* CMD8 Check for v2 sd card. Must be sent before using ACMD41
Non v2 cards will not respond to this command*/
if(send_cmd(SD_SEND_IF_COND, 0x1AA, RES_R6, &response))
if((response & 0xFFF) == 0x1AA)
sd_v2 = true;
/* Timeout for inintialization is 2 sec.
According to SD Specification 2.00 it should be >= 1,
but it's not enough in some rare cases. */
init_timeout = current_tick + 2*HZ;
do {
/* this timeout is the only valid error for this loop*/
if(TIME_AFTER(current_tick, init_timeout))
return -2;
if(!send_cmd(SD_APP_CMD, card_info.rca, RES_R1, &response))
return -3;
sleep(1); /* bus conflict otherwise */
/* ACMD41 For v2 cards set HCS bit[30] & send host voltage range to all */
if(!send_cmd(SD_APP_OP_COND, (0x00FF8000 | (sd_v2 ? 1<<30 : 0)),
RES_R3, &card_info.ocr))
return -4;
} while(!(card_info.ocr & (1<<31)) );
/* CMD2 send CID */
if(!send_cmd(SD_ALL_SEND_CID, 0, RES_R2, card_info.cid))
return -5;
/* CMD3 send RCA */
if(!send_cmd(SD_SEND_RELATIVE_ADDR, 0, RES_R6, &card_info.rca))
return -6;
/* End of Card Identification Mode ************************************/
/* CMD9 send CSD */
if(!send_cmd(SD_SEND_CSD, card_info.rca, RES_R2, card_info.csd))
return -11;
sd_parse_csd(&card_info);
if(!send_cmd(SD_SELECT_CARD, card_info.rca, RES_R1b, &response))
return -20;
if (!sd_wait_card_busy())
return -21;
/* CMD6 */
if(!send_cmd(SD_SWITCH_FUNC, 0x80fffff1, RES_R1, &response))
return -8;
sleep(HZ/10);
/* Card back to full speed 25MHz*/
SD_CTRL = (SD_CTRL & ~0x7FF);
card_info.initialized = 1;
return 0;
}
static void sd_thread(void) NORETURN_ATTR;
static void sd_thread(void)
{
struct queue_event ev;
bool idle_notified = false;
while (1)
{
queue_wait_w_tmo(&sd_queue, &ev, HZ);
switch ( ev.id )
{
#ifdef HAVE_HOTSWAP
case SYS_HOTSWAP_INSERTED:
case SYS_HOTSWAP_EXTRACTED:
{
int microsd_init = 1;
fat_lock(); /* lock-out FAT activity first -
prevent deadlocking via disk_mount that
would cause a reverse-order attempt with
another thread */
mutex_lock(&sd_mtx); /* lock-out card activity - direct calls
into driver that bypass the fat cache */
/* We now have exclusive control of fat cache and ata */
disk_unmount(sd_first_drive); /* release "by force", ensure file
descriptors aren't leaked and any busy
ones are invalid if mounting */
/* Force card init for new card, re-init for re-inserted one or
* clear if the last attempt to init failed with an error. */
card_info.initialized = 0;
if (ev.id == SYS_HOTSWAP_INSERTED)
{
sd_enable(true);
microsd_init = sd_init_card(sd_first_drive);
if (microsd_init < 0) /* initialisation failed */
panicf("microSD init failed : %d", microsd_init);
microsd_init = disk_mount(sd_first_drive); /* 0 if fail */
}
/*
* Mount succeeded, or this was an EXTRACTED event,
* in both cases notify the system about the changed filesystems
*/
if (microsd_init)
queue_broadcast(SYS_FS_CHANGED, 0);
sd_enable(false);
/* Access is now safe */
mutex_unlock(&sd_mtx);
fat_unlock();
}
break;
#endif
case SYS_TIMEOUT:
if (TIME_BEFORE(current_tick, last_disk_activity+(3*HZ)))
{
idle_notified = false;
}
else if (!idle_notified)
{
call_storage_idle_notifys(false);
idle_notified = true;
}
break;
case SYS_USB_CONNECTED:
usb_acknowledge(SYS_USB_CONNECTED_ACK);
/* Wait until the USB cable is extracted again */
usb_wait_for_disconnect(&sd_queue);
break;
}
}
}
static void init_controller(void)
{
/* reset SD module */
SCU_RSTCFG |= RSTCFG_SD;
sleep(1);
SCU_RSTCFG &= ~RSTCFG_SD;
/* set pins functions as SD signals */
SCU_IOMUXA_CON |= IOMUX_SD;
/* enable and unmask SD interrupts in interrupt controller */
SCU_CLKCFG &= ~CLKCFG_SD;
INTC_IMR |= IRQ_ARM_SD;
INTC_IECR |= IRQ_ARM_SD;
SD_CTRL = SD_PWR_CPU | SD_DETECT_MECH | SD_CLOCK_EN | 0x7D;
SD_INT = CMD_RES_INT_EN | DATA_XFER_INT_EN;
SD_CARD = SD_CARD_SELECT | SD_CARD_PWR_EN;
/* setup mmu buffers */
MMU_PNRI = 0x1ff;
MMU_PNRII = 0x1ff;
MMU_CTRL = MMU_MMU0_BUFII | MMU_CPU_BUFI | MMU_BUFII_RESET |
MMU_BUFII_BYTE | MMU_BUFI_RESET | MMU_BUFI_WORD;
/* setup A2A DMA CH0 for SD reads */
A2A_ISRC0 = (unsigned long)(&MMU_DATA);
A2A_ICNT0 = 512;
A2A_LCNT0 = 1;
/* setup A2A DMA CH1 for SD writes */
A2A_IDST1 = (unsigned long)(&MMU_DATA);
A2A_ICNT1 = 512;
A2A_LCNT1 = 1;
/* src and dst for CH0 and CH1 is AHB0 */
A2A_DOMAIN = 0;
#ifdef RK27XX_SD_DEBUG
/* setup Timer1 for profiling purposes */
TMR1CON = (1<<8)|(1<<3);
#endif
}
int sd_init(void)
{
int ret;
semaphore_init(&transfer_completion_signal, 1, 0);
semaphore_init(&command_completion_signal, 1, 0);
init_controller();
ret = sd_init_card();
if(ret < 0)
return ret;
/* init mutex */
mutex_init(&sd_mtx);
queue_init(&sd_queue, true);
create_thread(sd_thread, sd_stack, sizeof(sd_stack), 0,
sd_thread_name IF_PRIO(, PRIORITY_USER_INTERFACE) IF_COP(, CPU));
return 0;
}
static inline void read_sd_data(unsigned char **dst)
{
commit_discard_dcache_range((const void *)*dst, 512);
A2A_IDST0 = (unsigned long)*dst;
A2A_CON0 = (3<<9) | /* burst 16 */
(1<<6) | /* fixed src */
(1<<3) | /* DMA start */
(2<<1) | /* word transfer size */
(1<<0); /* software mode */
/* wait for DMA engine to finish transfer */
while (A2A_DMA_STS & 1);
*dst += 512;
}
static inline void write_sd_data(unsigned char **src)
{
commit_discard_dcache_range((const void *)*src, 512);
A2A_ISRC1 = (unsigned long)*src;
A2A_CON1 = (3<<9) | /* burst 16 */
(1<<5) | /* fixed dst */
(1<<3) | /* DMA start */
(2<<1) | /* word transfer size */
(1<<0); /* software mode */
/* wait for DMA engine to finish transfer */
while (A2A_DMA_STS & 2);
*src += 512;
}
int sd_read_sectors(IF_MD(int drive,) unsigned long start, int count,
void* buf)
{
#ifdef HAVE_MULTIDRIVE
(void)drive;
#endif
unsigned long response;
unsigned int retry_cnt = 0;
int cnt, ret = 0;
unsigned char *dst;
mutex_lock(&sd_mtx);
sd_enable(true);
if (count <= 0 || start + count > card_info.numblocks)
return -1;
if(!(card_info.ocr & (1<<30)))
start <<= 9; /* not SDHC */
while (retry_cnt++ < 20)
{
cnt = count;
dst = (unsigned char *)buf;
ret = 0;
retry = false; /* reset retry flag */
mmu_buff_reset();
if (cnt == 1)
{
/* last block to transfer */
SD_DATAT = DATA_XFER_START | DATA_XFER_READ |
DATA_BUS_1LINE | DATA_XFER_DMA_DIS |
DATA_XFER_SINGLE;
}
else
{
/* more than one block to transfer */
SD_DATAT = DATA_XFER_START | DATA_XFER_READ |
DATA_BUS_1LINE | DATA_XFER_DMA_DIS |
DATA_XFER_MULTI;
}
/* issue read command to the card */
if (!send_cmd(SD_READ_MULTIPLE_BLOCK, start, RES_R1, &response))
{
ret = -2;
continue;
}
while (cnt > 0)
{
#ifdef RK27XX_SD_DEBUG
/* debug stuff */
TMR1LR = 0xffffffff;
#endif
/* wait for transfer completion */
semaphore_wait(&transfer_completion_signal, TIMEOUT_BLOCK);
#ifdef RK27XX_SD_DEBUG
/* debug stuff */
sd_debug_time_rd = 0xffffffff - TMR1CVR;
#endif
if (retry)
{
/* data transfer error */
ret = -3;
break;
}
/* exchange buffers */
mmu_switch_buff();
cnt--;
if (cnt == 0)
{
if (!send_cmd(SD_STOP_TRANSMISSION, 0, RES_R1b, &response))
ret = -4;
read_sd_data(&dst);
break;
}
else if (cnt == 1)
{
/* last block to transfer */
SD_DATAT = DATA_XFER_START | DATA_XFER_READ |
DATA_BUS_1LINE | DATA_XFER_DMA_DIS |
DATA_XFER_SINGLE;
read_sd_data(&dst);
}
else
{
/* more than one block to transfer */
SD_DATAT = DATA_XFER_START | DATA_XFER_READ |
DATA_BUS_1LINE | DATA_XFER_DMA_DIS |
DATA_XFER_MULTI;
read_sd_data(&dst);
}
last_disk_activity = current_tick;
} /* while (cnt > 0) */
/* transfer successfull - leave retry loop */
if (ret == 0)
break;
} /* while (retry_cnt++ < 20) */
sd_enable(false);
mutex_unlock(&sd_mtx);
return ret;
}
/* Not tested */
int sd_write_sectors(IF_MD(int drive,) unsigned long start, int count,
const void* buf)
{
#ifdef HAVE_MULTIDRIVE
(void) drive;
#endif
#if defined(BOOTLOADER) /* we don't need write support in bootloader */
(void) start;
(void) count;
(void) buf;
return -1;
#else
#ifdef RK27XX_SD_DEBUG
/* debug stuff */
TMR1LR = 0xffffffff;
#endif
unsigned long response;
unsigned int retry_cnt = 0;
int cnt, ret = 0;
unsigned char *src;
/* bool card_selected = false; */
mutex_lock(&sd_mtx);
sd_enable(true);
if (count <= 0 || start + count > card_info.numblocks)
return -1;
if(!(card_info.ocr & (1<<30)))
start <<= 9; /* not SDHC */
while (retry_cnt++ < 20)
{
cnt = count;
src = (unsigned char *)buf;
ret = 0;
retry = false; /* reset retry flag */
mmu_buff_reset(); /* reset recive buff state */
write_sd_data(&src); /* put data into transfer buffer */
if (!send_cmd(SD_WRITE_MULTIPLE_BLOCK, start, RES_R1, &response))
{
ret = -3;
continue;
}
while (cnt > 0)
{
/* exchange buffers */
mmu_switch_buff();
if (cnt == 1)
{
/* last block to transfer */
SD_DATAT = DATA_XFER_START | DATA_XFER_WRITE |
DATA_BUS_1LINE | DATA_XFER_DMA_DIS |
DATA_XFER_SINGLE;
}
else
{
/* more than one block to transfer */
SD_DATAT = DATA_XFER_START | DATA_XFER_WRITE |
DATA_BUS_1LINE | DATA_XFER_DMA_DIS |
DATA_XFER_MULTI;
/* put more data */
write_sd_data(&src);
}
/* wait for transfer completion */
semaphore_wait(&transfer_completion_signal, TIMEOUT_BLOCK);
if (retry)
{
/* data transfer error */
ret = -3;
break;
}
cnt--;
} /* while (cnt > 0) */
if (!send_cmd(SD_STOP_TRANSMISSION, 0, RES_R1b, &response))
ret = -4;
if (!sd_wait_card_busy())
ret = -5;
/* transfer successfull - leave retry loop */
if (ret == 0)
break;
}
sd_enable(false);
mutex_unlock(&sd_mtx);
#ifdef RK27XX_SD_DEBUG
/* debug stuff */
sd_debug_time_wr = 0xffffffff - TMR1CVR;
#endif
return ret;
#endif /* defined(BOOTLOADER) */
}
void sd_enable(bool on)
{
/* enable or disable clock signal for SD module */
if (on)
{
SCU_CLKCFG &= ~CLKCFG_SD;
led(true);
}
else
{
SCU_CLKCFG |= CLKCFG_SD;
led(false);
}
}
#ifndef BOOTLOADER
long sd_last_disk_activity(void)
{
return last_disk_activity;
}
tCardInfo *card_get_info_target(int card_no)
{
(void)card_no;
return &card_info;
}
#endif /* BOOTLOADER */
#ifdef HAVE_HOTSWAP
/* Not complete and disabled in config */
bool sd_removable(IF_MD_NONVOID(int drive))
{
(void)drive;
return true;
}
bool sd_present(IF_MD_NONVOID(int drive))
{
(void)drive;
return card_detect_target();
}
static int sd_oneshot_callback(struct timeout *tmo)
{
(void)tmo;
/* This is called only if the state was stable for 300ms - check state
* and post appropriate event. */
if (card_detect_target())
{
queue_broadcast(SYS_HOTSWAP_INSERTED, 0);
}
else
queue_broadcast(SYS_HOTSWAP_EXTRACTED, 0);
return 0;
}
/* interrupt handler for SD detect */
#endif /* HAVE_HOTSWAP */
#ifdef CONFIG_STORAGE_MULTI
int sd_num_drives(int first_drive)
{
(void)first_drive;
/* we have only one SD drive */
return 1;
}
#endif /* CONFIG_STORAGE_MULTI */
Reference in a new issue View git blame Copy permalink