rockbox/firmware/target/arm/tms320dm320/mrobe-500/powermgmt-mr500.c
Jonathan Gordon eed41ff985 mrobe changes:
stop it thinking the battery is always flat and shutting down
add keymap for time/date screen
pressing a list item will highlight it before accepting it (looks better than it just entering the item without the selection changing first)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15280 a1c6a512-1295-4272-9138-f99709370657
2007-10-23 14:33:16 +00:00

82 lines
2.8 KiB
C
Executable file

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2007 by Karl Kurbjun
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "adc.h"
#include "powermgmt.h"
#include "tsc2100.h"
#include "kernel.h"
unsigned short current_voltage = 3910;
const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT] =
{
0
};
const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT] =
{
0
};
/* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */
const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] =
{
{ 100, 300, 400, 500, 600, 700, 800, 900, 1000, 1200, 1320 },
};
/* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */
const unsigned short percent_to_volt_charge[11] =
{
100, 300, 400, 500, 600, 700, 800, 900, 1000, 1200, 1320,
};
void read_battery_inputs(void)
{
short tsadc = tsc2100_readreg(TSADC_PAGE, TSADC_ADDRESS);
short adscm = (tsadc&TSADC_ADSCM_MASK)>>TSADC_ADSCM_SHIFT;
if (adscm == 0xb) /* battery is available */
{
current_voltage = tsc2100_readreg(0, 5); /* BAT1 */
tsc2100_readreg(0, 6); /* BAT2 */
tsc2100_readreg(0, 7); /* AUX */
/* reset the TSC2100 to read touches */
tsadc &= ~(TSADC_PSTCM|TSADC_ADST|TSADC_ADSCM_MASK);
tsadc |= TSADC_PSTCM|(0x2<<TSADC_ADSCM_SHIFT);
tsc2100_writereg(TSADC_PAGE, TSADC_ADDRESS, tsadc);
tsc2100_writereg(TSSTAT_PAGE, TSSTAT_ADDRESS, 2<<TSSTAT_PINTDAV_SHIFT);
}
}
/* Returns battery voltage from ADC [millivolts] */
unsigned int battery_adc_voltage(void)
{
static unsigned last_tick = 0;
short tsadc = tsc2100_readreg(TSADC_PAGE, TSADC_ADDRESS);
if (TIME_BEFORE(last_tick+2*HZ, current_tick))
{
tsadc &= ~(TSADC_PSTCM|TSADC_ADST|TSADC_ADSCM_MASK);
tsadc |= 0xb<<TSADC_ADSCM_SHIFT;
tsc2100_writereg(TSADC_PAGE, TSADC_ADDRESS, tsadc&(~(1<<15)));
tsc2100_writereg(TSSTAT_PAGE, TSSTAT_ADDRESS, 2<<TSSTAT_PINTDAV_SHIFT);
last_tick = current_tick;
}
else
read_battery_inputs();
return current_voltage;
}