92fb1df03a
* Remember last used text input mode (keyboard or morse input) in settings. * Add setting "Use Morse Code Input" under Settings -> General Settings -> System. Now it is possible for some of targets without button combo for changing input mode to use morse input by changing the setting. it's not possible for them to change input mode during in the keyboard screen of course. There are still targets without morse input mode. Flyspray: FS#10338 Author: myself, David Johnston git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23567 a1c6a512-1295-4272-9138-f99709370657
136 lines
3.7 KiB
C
136 lines
3.7 KiB
C
/*
|
|
* This config file is for the Sansa M200 series
|
|
*/
|
|
#define TARGET_TREE /* this target is using the target tree system */
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 29
|
|
|
|
#define MODEL_NAME "Sandisk Sansa m200 series"
|
|
|
|
/* Enable FAT16 support */
|
|
#define HAVE_FAT16SUPPORT
|
|
|
|
/* define this if you have recording possibility */
|
|
//#define HAVE_RECORDING
|
|
|
|
/* Define bitmask of input sources - recordable bitmask can be defined
|
|
explicitly if different */
|
|
//#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_SPDIF)
|
|
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP
|
|
|
|
/* define this if you can flip your LCD */
|
|
#define HAVE_LCD_FLIP
|
|
|
|
/* define this if you can invert the colours on your LCD */
|
|
#define HAVE_LCD_INVERT
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
/* define this if you have access to the pitchscreen */
|
|
#define HAVE_PITCHSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* define this if you have a flash memory storage */
|
|
#define HAVE_FLASH_STORAGE
|
|
|
|
#define CONFIG_STORAGE STORAGE_NAND
|
|
|
|
#define CONFIG_NAND NAND_TCC
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 128
|
|
#define LCD_HEIGHT 64
|
|
#define LCD_DEPTH 1
|
|
|
|
#define LCD_PIXELFORMAT VERTICAL_PACKING
|
|
|
|
/* Display colours, for screenshots and sim (0xRRGGBB) */
|
|
#define LCD_BARKCOLOR 0x000000
|
|
#define LCD_BRIGHTCOLOR 0x5e6854
|
|
#define LCD_BL_DARKCOLOR 0x000000
|
|
#define LCD_BL_BRIGHTCOLOR 0x3ca0e6
|
|
|
|
/* define this to indicate your device's keypad */
|
|
#define CONFIG_KEYPAD SANSA_M200_PAD
|
|
|
|
/* Define this to enable morse code input */
|
|
#define HAVE_MORSE_INPUT
|
|
|
|
/* define this if you have a real-time clock */
|
|
#define CONFIG_RTC RTC_TCC77X
|
|
|
|
/* define this if you have RTC RAM available for settings */
|
|
//#define HAVE_RTC_RAM
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x38000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x10000
|
|
|
|
#define AB_REPEAT_ENABLE 1
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
|
|
/* Define this if you have the TLV320 audio codec */
|
|
#define HAVE_TLV320
|
|
|
|
/* TLV320 has no tone controls, so we use the software ones */
|
|
#define HAVE_SW_TONE_CONTROLS
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
|
|
#define CONFIG_I2C I2C_TCC77X
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
/* define this if the unit should not shut down on low battery. */
|
|
#define NO_LOW_BATTERY_SHUTDOWN
|
|
|
|
/* Define this if you have a TCC770 */
|
|
#define CONFIG_CPU TCC770
|
|
|
|
/* Define this if you have ATA power-off control */
|
|
#define HAVE_ATA_POWER_OFF
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 120000000
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
|
|
#define CONFIG_LCD LCD_SSD1815
|
|
|
|
#define BOOTFILE_EXT "m200"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/"
|
|
|
|
#define IBSS_ATTR_VOICE_STACK
|
|
#define ICODE_ATTR_TREMOR_NOT_MDCT
|
|
#define ICODE_ATTR_TREMOR_MDCT
|
|
#define ICODE_ATTR_FLAC
|
|
#define IBSS_ATTR_FLAC_DECODED0
|
|
#define ICONST_ATTR_MPA_HUFFMAN
|
|
#define IBSS_ATTR_MPC_SAMPLE_BUF
|
|
#define ICODE_ATTR_ALAC
|
|
#define IBSS_ATTR_SHORTEN_DECODED0
|
|
|
|
#define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
|
|
|