92fb1df03a
* Remember last used text input mode (keyboard or morse input) in settings. * Add setting "Use Morse Code Input" under Settings -> General Settings -> System. Now it is possible for some of targets without button combo for changing input mode to use morse input by changing the setting. it's not possible for them to change input mode during in the keyboard screen of course. There are still targets without morse input mode. Flyspray: FS#10338 Author: myself, David Johnston git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23567 a1c6a512-1295-4272-9138-f99709370657
216 lines
6.2 KiB
C
216 lines
6.2 KiB
C
/*
|
|
* This config file is for toshiba Gigabeat S
|
|
*/
|
|
|
|
#define TARGET_TREE /* this target is using the target tree system */
|
|
|
|
#define TOSHIBA_GIGABEAT_S 1
|
|
|
|
#define MODEL_NAME "Toshiba Gigabeat S"
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 21
|
|
|
|
/* define this if you use an ATA controller */
|
|
#define CONFIG_STORAGE STORAGE_ATA
|
|
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP
|
|
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR
|
|
|
|
/* define this if you want album art for this target */
|
|
#define HAVE_ALBUMART
|
|
|
|
/* define this to enable bitmap scaling */
|
|
#define HAVE_BMP_SCALING
|
|
|
|
/* define this to enable JPEG decoding */
|
|
#define HAVE_JPEG
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you have access to the pitchscreen */
|
|
#define HAVE_PITCHSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* define this if the target has volume keys which can be used in the lists */
|
|
#define HAVE_VOLUME_IN_LIST
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 240
|
|
#define LCD_HEIGHT 320
|
|
#define LCD_DEPTH 16 /* 65k colours */
|
|
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
|
|
|
|
#define CONFIG_KEYPAD GIGABEAT_S_PAD
|
|
|
|
/* Define this to enable morse code input */
|
|
#define HAVE_MORSE_INPUT
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
|
|
/* define this if you have a real-time clock */
|
|
#define CONFIG_RTC RTC_MC13783
|
|
|
|
/* Define if the device can wake from an RTC alarm */
|
|
#define HAVE_RTC_ALARM
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
|
|
/* define this if you have a disk storage, i.e. something
|
|
that needs spinups and can cause skips when shaked */
|
|
#define HAVE_DISK_STORAGE
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x100000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
/* Define this if you have a SI4700 fm radio tuner */
|
|
#define CONFIG_TUNER SI4700
|
|
|
|
/* Define this if you have the WM8978 audio codec */
|
|
#define HAVE_WM8978
|
|
|
|
/* Define bitmask of input sources - recordable bitmask can be defined
|
|
explicitly if different */
|
|
#define INPUT_SRC_CAPS SRC_CAP_FMRADIO
|
|
|
|
/* define the bitmask of hardware sample rates */
|
|
#define HW_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
|
|
SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
|
|
SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
|
|
|
|
/* define the bitmask of recording sample rates */
|
|
#define REC_SAMPR_CAPS HW_SAMPR_CAPS /* Same as playback */
|
|
|
|
/* define default recording levels */
|
|
#define DEFAULT_REC_LEFT_GAIN 0
|
|
#define DEFAULT_REC_RIGHT_GAIN 0
|
|
|
|
/* Define this if you have recording capability */
|
|
#define HAVE_RECORDING
|
|
|
|
/* Define this if your LCD can be put to sleep. */
|
|
#define HAVE_LCD_SLEEP
|
|
/* We don't use a setting but a fixed delay after the backlight has
|
|
* turned off */
|
|
#define LCD_SLEEP_TIMEOUT (2*HZ)
|
|
|
|
/* Define this if your LCD can be enabled/disabled */
|
|
#define HAVE_LCD_ENABLE
|
|
|
|
#ifndef BOOTLOADER
|
|
|
|
#define HAVE_BACKLIGHT_BRIGHTNESS
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
#define MIN_BRIGHTNESS_SETTING 1
|
|
#define MAX_BRIGHTNESS_SETTING 24
|
|
#define DEFAULT_BRIGHTNESS_SETTING 12
|
|
|
|
/* Implementation-defined fading type with bool settings */
|
|
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_TARGET
|
|
|
|
#define HAVE_HEADPHONE_DETECTION
|
|
#endif /* BOOTLOADER */
|
|
|
|
#define CONFIG_CPU IMX31L
|
|
|
|
/* Define this if you want to use imx31l's i2c interface */
|
|
#define CONFIG_I2C I2C_IMX31L
|
|
|
|
/* Define the bitmask of modules used */
|
|
#define SPI_MODULE_MASK (USE_CSPI2_MODULE)
|
|
#define I2C_MODULE_MASK (USE_I2C1_MODULE | USE_I2C2_MODULE)
|
|
#define GPIO_EVENT_MASK (USE_GPIO1_EVENTS)
|
|
|
|
/* Define this if target has an additional number of threads specific to it */
|
|
#define TARGET_EXTRA_THREADS 2
|
|
|
|
/* Type of mobile power - check this out */
|
|
#define BATTERY_CAPACITY_DEFAULT 700 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 700 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 1200 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 25 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
/* TODO: have a proper status displayed in the bootloader and have it
|
|
* work! */
|
|
/* Charing implemented in a target-specific algorithm */
|
|
#define CONFIG_CHARGING CHARGING_TARGET
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
#define HAVE_POWEROFF_WHILE_CHARGING
|
|
|
|
/* The size of the flash ROM */
|
|
#define FLASH_SIZE 0x200000
|
|
|
|
/* Define this to the CPU frequency */
|
|
/* TODO */
|
|
#define CPU_FREQ 264000000 /* Set by retailOS loader */
|
|
|
|
/* define this if the unit can be powered or charged via USB */
|
|
#define HAVE_USB_POWER
|
|
#define USBPOWER_BUTTON BUTTON_MENU
|
|
#define USBPOWER_BTN_IGNORE BUTTON_POWER
|
|
|
|
/* define this if the unit has a battery switch or battery can be removed
|
|
* when running */
|
|
#define HAVE_BATTERY_SWITCH
|
|
|
|
/* USB On-the-go */
|
|
#define CONFIG_USBOTG USBOTG_ARC
|
|
|
|
/* enable these for the usb stack */
|
|
#define USE_ROCKBOX_USB
|
|
#define HAVE_USBSTACK
|
|
/* usb stack and driver settings */
|
|
#define USB_PORTSCX_PHY_TYPE PORTSCX_PTS_ULPI
|
|
#define USB_VENDOR_ID 0x0930
|
|
#define USB_PRODUCT_ID 0x0010
|
|
#define HAVE_USB_HID_MOUSE
|
|
|
|
/* Define this if you have ATA power-off control */
|
|
#define HAVE_ATA_POWER_OFF
|
|
|
|
/* Define this to add support for ATA DMA */
|
|
#define HAVE_ATA_DMA
|
|
|
|
#define CONFIG_LCD LCD_GIGABEAT
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
|
|
//#define HAVE_SERIAL
|
|
#define HAVE_VOLUME_IN_LIST
|
|
|
|
/*Remove Comments from UART_INT to enable the UART interrupts,*/
|
|
/*otherwise iterrupts will be disabled. For now we will test */
|
|
/*UART state by polling the registers, and if necessary update this */
|
|
/*method by using the interrupts instead*/
|
|
//#define UART_INT
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
/* #define HAVE_ADJUSTABLE_CPU_FREQ */
|
|
|
|
#define HAVE_PCM_DMA_ADDRESS
|
|
|
|
#define BOOTFILE_EXT "gigabeat"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|