89ba7e818c
_remote_backlight_* and _buttonlight_* are cleaned as well Change-Id: I73653752831bbe170c26ba95d3bc04c2e3a5cf30
565 lines
13 KiB
C
565 lines
13 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2009 Mark Arigo
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#include "cpu.h"
|
|
#include "kernel.h"
|
|
#include "thread.h"
|
|
#include "system.h"
|
|
#include "lcd-remote.h"
|
|
#include "lcd-remote-target.h"
|
|
#include "button.h"
|
|
#include "button-target.h"
|
|
|
|
/* Temporary defines until we sort out why the gui stuff doesn't like this size
|
|
(I believe the status bar isn't doing sanity checks and is writing outside
|
|
the frame buffer size). */
|
|
#define RC_WIDTH 79
|
|
#define RC_HEIGHT 16
|
|
|
|
#define RC_CONTRAST_MASK 0x000000ff
|
|
#define RC_SCREEN_ON 0x00000100
|
|
#define RC_BACKLIGHT_ON 0x00000200
|
|
|
|
#define RC_DEV_INIT 0x00001000
|
|
#define RC_DETECTED 0x00002000
|
|
#define RC_AWAKE 0x00004000
|
|
#define RC_POWER_OFF 0x00008000
|
|
|
|
#define RC_UPDATE_LCD 0x00010000
|
|
#define RC_UPDATE_CONTROLLER 0x00020000
|
|
#define RC_UPDATE_ICONS 0x00040000
|
|
#define RC_UPDATE_MASK (RC_UPDATE_LCD|RC_UPDATE_CONTROLLER|RC_UPDATE_ICONS)
|
|
|
|
#define RC_TX_ERROR 0x00100000
|
|
#define RC_RX_ERROR 0x00200000
|
|
#define RC_TIMEOUT_ERROR 0x00400000
|
|
#define RC_ERROR_MASK (RC_TX_ERROR|RC_RX_ERROR|RC_TIMEOUT_ERROR)
|
|
|
|
#define RC_FORCE_DETECT 0x80000000
|
|
|
|
#define RX_READY 0x01
|
|
#define TX_READY 0x20
|
|
|
|
#define POLL_TIMEOUT 50000
|
|
|
|
bool remote_initialized = false;
|
|
unsigned int rc_status = 0;
|
|
unsigned char rc_buf[5];
|
|
|
|
/* ================================================== */
|
|
/* Remote thread functions */
|
|
/* These functions are private to the remote thread */
|
|
/* ================================================== */
|
|
static struct semaphore rc_thread_wakeup;
|
|
static unsigned int remote_thread_id;
|
|
static int remote_stack[512/sizeof(int)];
|
|
static const char * const remote_thread_name = "remote";
|
|
|
|
static bool remote_wait_ready(int ready_mask)
|
|
{
|
|
unsigned long current;
|
|
unsigned long start = USEC_TIMER;
|
|
unsigned long timeout = start + POLL_TIMEOUT;
|
|
|
|
rc_status &= ~RC_TIMEOUT_ERROR;
|
|
|
|
if (start <= timeout)
|
|
{
|
|
do
|
|
{
|
|
if (SER1_LSR & ready_mask)
|
|
return true;
|
|
|
|
//~ sleep(1);
|
|
|
|
current = USEC_TIMER;
|
|
} while (current < timeout);
|
|
}
|
|
else
|
|
{
|
|
do
|
|
{
|
|
if (SER1_LSR & ready_mask)
|
|
return true;
|
|
|
|
//~ sleep(1);
|
|
|
|
current = USEC_TIMER - POLL_TIMEOUT;
|
|
} while (current < start);
|
|
}
|
|
|
|
rc_status |= RC_TIMEOUT_ERROR;
|
|
return false;
|
|
}
|
|
|
|
static bool remote_rx(void)
|
|
{
|
|
int i;
|
|
unsigned char chksum[2];
|
|
|
|
rc_status &= ~RC_RX_ERROR;
|
|
|
|
for (i = 0; i < 5; i++)
|
|
{
|
|
if (!remote_wait_ready(RX_READY))
|
|
{
|
|
rc_status |= RC_RX_ERROR;
|
|
return false;
|
|
}
|
|
|
|
rc_buf[i] = SER1_RBR;
|
|
}
|
|
|
|
/* check opcode */
|
|
if ((rc_buf[0] & 0xf0) != 0xf0)
|
|
{
|
|
rc_status |= RC_RX_ERROR;
|
|
return false;
|
|
}
|
|
|
|
/* verify the checksums */
|
|
chksum[0] = chksum[1] = 0;
|
|
for (i = 0; i < 3; i++)
|
|
{
|
|
chksum[0] ^= rc_buf[i];
|
|
chksum[1] += rc_buf[i];
|
|
}
|
|
|
|
if ((chksum[0] != rc_buf[3]) && (chksum[1] != rc_buf[4]))
|
|
{
|
|
rc_status |= RC_RX_ERROR;
|
|
return false;
|
|
}
|
|
|
|
/* reception error */
|
|
if ((rc_buf[0] & 0x1) || (rc_buf[0] & 0x2) || (rc_buf[0] & 0x4))
|
|
{
|
|
rc_status |= RC_RX_ERROR;
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool remote_tx(unsigned char *data, int len)
|
|
{
|
|
int i;
|
|
unsigned char chksum[2];
|
|
|
|
rc_status &= ~RC_TX_ERROR;
|
|
|
|
chksum[0] = chksum[1] = 0;
|
|
|
|
for (i = 0; i < len; i++)
|
|
{
|
|
if (!remote_wait_ready(TX_READY))
|
|
{
|
|
rc_status |= RC_TX_ERROR;
|
|
return false;
|
|
}
|
|
|
|
SER1_THR = data[i];
|
|
chksum[0] ^= data[i];
|
|
chksum[1] += data[i];
|
|
}
|
|
|
|
for (i = 0; i < 2; i++)
|
|
{
|
|
if (!remote_wait_ready(TX_READY))
|
|
{
|
|
rc_status |= RC_TX_ERROR;
|
|
return false;
|
|
}
|
|
|
|
SER1_THR = chksum[i];
|
|
}
|
|
|
|
return remote_rx();
|
|
}
|
|
|
|
static void remote_dev_enable(bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
outl(inl(0x70000018) | 0xaa000, 0x70000018);
|
|
DEV_INIT2 &= ~0x800;
|
|
|
|
GPIO_CLEAR_BITWISE(GPIOL_OUTPUT_VAL, 0x80);
|
|
GPIO_SET_BITWISE(GPIOL_OUTPUT_EN, 0x80);
|
|
|
|
DEV_EN |= DEV_SER1;
|
|
|
|
SER1_RBR;
|
|
SER1_LCR = 0x80;
|
|
SER1_DLL = 0x50;
|
|
SER1_DLM = 0x00;
|
|
SER1_LCR = 0x03;
|
|
SER1_FCR = 0x07;
|
|
|
|
rc_status |= RC_DEV_INIT;
|
|
}
|
|
else
|
|
{
|
|
outl(inl(0x70000018) & ~0xaa000, 0x70000018);
|
|
DEV_INIT2 &= ~0x800;
|
|
|
|
GPIO_SET_BITWISE(GPIOL_OUTPUT_VAL, 0x80);
|
|
GPIO_SET_BITWISE(GPIOL_OUTPUT_EN, 0x80);
|
|
|
|
DEV_RS |= DEV_SER1;
|
|
nop;
|
|
DEV_RS &= ~DEV_SER1;
|
|
|
|
DEV_EN &= ~DEV_SER1;
|
|
|
|
rc_status &= ~RC_DEV_INIT;
|
|
}
|
|
}
|
|
|
|
static void remote_update_lcd(void)
|
|
{
|
|
int x, y, draw_now;
|
|
unsigned char data[RC_WIDTH + 7];
|
|
|
|
/* If the draw_now bit is set, the draw occurs directly on the LCD.
|
|
Otherwise, the data is stored in an off-screen buffer and displayed
|
|
the next time a draw operation is executed with this flag set. */
|
|
draw_now = 0;
|
|
|
|
for (y = 0; y < 2; y++)
|
|
{
|
|
data[0] = 0x51;
|
|
data[1] = draw_now << 7;
|
|
data[2] = RC_WIDTH; /* width */
|
|
data[3] = 0; /* x1 */
|
|
data[4] = y << 3; /* y1 */
|
|
data[5] = RC_WIDTH; /* x2 */
|
|
data[6] = (y + 1) << 3; /* y2 */
|
|
|
|
for (x = 0; x < RC_WIDTH; x++)
|
|
data[x + 7] = *FBREMOTEADDR(x,y);
|
|
|
|
remote_tx(data, RC_WIDTH + 7);
|
|
|
|
draw_now = 1;
|
|
}
|
|
}
|
|
|
|
static void remote_update_controller(void)
|
|
{
|
|
unsigned char data[3];
|
|
|
|
data[0] = 0x31;
|
|
data[1] = 0x00;
|
|
if (rc_status & RC_SCREEN_ON)
|
|
data[1] |= 0x80;
|
|
if (rc_status & RC_BACKLIGHT_ON)
|
|
data[1] |= 0x40;
|
|
data[2] = (unsigned char)(rc_status & RC_CONTRAST_MASK);
|
|
remote_tx(data, 3);
|
|
}
|
|
|
|
#if 0
|
|
static void remote_update_icons(unsigned char symbols)
|
|
{
|
|
unsigned char data[2];
|
|
|
|
if (!(rc_status & RC_AWAKE) && !(rc_status & RC_SCREEN_ON))
|
|
return;
|
|
|
|
data[0] = 0x41;
|
|
data[1] = symbols;
|
|
remote_tx(data, 2);
|
|
}
|
|
#endif
|
|
|
|
static bool remote_nop(void)
|
|
{
|
|
unsigned char val[2];
|
|
|
|
val[0] = 0x11;
|
|
val[1] = 0x30;
|
|
return remote_tx(val, 2);
|
|
}
|
|
|
|
static void remote_wake(void)
|
|
{
|
|
if (remote_nop())
|
|
{
|
|
rc_status |= RC_AWAKE;
|
|
return;
|
|
}
|
|
|
|
rc_status &= ~RC_AWAKE;
|
|
return;
|
|
}
|
|
|
|
static void remote_sleep(void)
|
|
{
|
|
unsigned char data[2];
|
|
|
|
if (rc_status & RC_AWAKE)
|
|
{
|
|
data[0] = 0x71;
|
|
data[1] = 0x30;
|
|
remote_tx(data, 2);
|
|
|
|
udelay(25000);
|
|
}
|
|
|
|
rc_status &= ~RC_AWAKE;
|
|
}
|
|
|
|
static void remote_off(void)
|
|
{
|
|
if (rc_status & RC_AWAKE)
|
|
remote_sleep();
|
|
|
|
if (rc_status & RC_DEV_INIT)
|
|
remote_dev_enable(false);
|
|
|
|
rc_status &= ~(RC_DETECTED | RC_ERROR_MASK | RC_UPDATE_MASK);
|
|
remote_initialized = false;
|
|
}
|
|
|
|
static void remote_on(void)
|
|
{
|
|
if (!(rc_status & RC_DEV_INIT))
|
|
remote_dev_enable(true);
|
|
|
|
remote_wake();
|
|
|
|
if (rc_status & RC_AWAKE)
|
|
{
|
|
rc_status |= RC_DETECTED;
|
|
remote_initialized = true;
|
|
|
|
rc_status |= (RC_UPDATE_MASK | RC_SCREEN_ON | RC_BACKLIGHT_ON);
|
|
//~ remote_update_icons(0xf0); /* show battery */
|
|
}
|
|
else
|
|
{
|
|
rc_status &= ~RC_DETECTED;
|
|
remote_initialized = false;
|
|
}
|
|
}
|
|
|
|
static void remote_thread(void)
|
|
{
|
|
int rc_thread_sleep_count = 10;
|
|
int rc_thread_wait_timeout = TIMEOUT_BLOCK;
|
|
|
|
while (1)
|
|
{
|
|
semaphore_wait(&rc_thread_wakeup, rc_thread_wait_timeout);
|
|
|
|
/* Error handling (most likely due to remote not present) */
|
|
if (rc_status & RC_ERROR_MASK)
|
|
{
|
|
if (--rc_thread_sleep_count == 0)
|
|
rc_status |= RC_POWER_OFF;
|
|
}
|
|
|
|
/* Power-off (thread sleeps) */
|
|
if (rc_status & RC_POWER_OFF)
|
|
{
|
|
remote_off();
|
|
|
|
rc_thread_sleep_count = 10;
|
|
rc_thread_wait_timeout = TIMEOUT_BLOCK;
|
|
|
|
continue;
|
|
}
|
|
|
|
/* Detection */
|
|
if (!(rc_status & RC_DETECTED))
|
|
{
|
|
rc_thread_wait_timeout = HZ;
|
|
|
|
if (headphones_inserted())
|
|
{
|
|
remote_on();
|
|
|
|
if (rc_status & RC_AWAKE)
|
|
{
|
|
rc_thread_sleep_count = 10;
|
|
rc_thread_wait_timeout = HZ/20; /* ~50ms for updates */
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if (--rc_thread_sleep_count == 0)
|
|
rc_status &= ~RC_POWER_OFF;
|
|
}
|
|
|
|
continue;
|
|
}
|
|
|
|
/* Update the remote (one per wakeup cycle) */
|
|
if (headphones_inserted() && (rc_status & RC_AWAKE))
|
|
{
|
|
if (rc_status & RC_SCREEN_ON)
|
|
{
|
|
/* In order of importance */
|
|
if (rc_status & RC_UPDATE_CONTROLLER)
|
|
{
|
|
remote_update_controller();
|
|
rc_status &= ~RC_UPDATE_CONTROLLER;
|
|
}
|
|
else if (rc_status & RC_UPDATE_LCD)
|
|
{
|
|
remote_update_lcd();
|
|
rc_status &= ~RC_UPDATE_LCD;
|
|
}
|
|
else
|
|
{
|
|
remote_nop();
|
|
}
|
|
}
|
|
else
|
|
{
|
|
remote_nop();
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* ============================================= */
|
|
/* Public functions */
|
|
/* These should only set the update flags that */
|
|
/* will be executed in the remote thread. */
|
|
/* ============================================= */
|
|
bool lcd_remote_read_device(unsigned char *data)
|
|
{
|
|
if (!(rc_status & RC_AWAKE) || (rc_status & RC_ERROR_MASK))
|
|
return false;
|
|
|
|
/* Return the most recent data. While the remote is plugged,
|
|
this is updated ~50ms */
|
|
data[0] = rc_buf[0];
|
|
data[1] = rc_buf[1];
|
|
data[2] = rc_buf[2];
|
|
data[3] = rc_buf[3];
|
|
data[4] = rc_buf[4];
|
|
|
|
return true;
|
|
}
|
|
|
|
void lcd_remote_set_invert_display(bool yesno)
|
|
{
|
|
/* dummy function...need to introduce HAVE_LCD_REMOTE_INVERT */
|
|
(void)yesno;
|
|
}
|
|
|
|
/* turn the display upside down (call lcd_remote_update() afterwards) */
|
|
void lcd_remote_set_flip(bool yesno)
|
|
{
|
|
/* dummy function...need to introduce HAVE_LCD_REMOTE_FLIP */
|
|
(void)yesno;
|
|
}
|
|
|
|
int lcd_remote_default_contrast(void)
|
|
{
|
|
return DEFAULT_REMOTE_CONTRAST_SETTING;
|
|
}
|
|
|
|
void lcd_remote_set_contrast(int val)
|
|
{
|
|
rc_status = (rc_status & ~RC_CONTRAST_MASK) | (val & RC_CONTRAST_MASK);
|
|
rc_status |= RC_UPDATE_CONTROLLER;
|
|
}
|
|
|
|
void lcd_remote_off(void)
|
|
{
|
|
/* should only be used to power off at shutdown */
|
|
rc_status |= RC_POWER_OFF;
|
|
semaphore_release(&rc_thread_wakeup);
|
|
|
|
/* wait until the things are powered off */
|
|
while (rc_status & RC_DEV_INIT)
|
|
sleep(HZ/10);
|
|
}
|
|
|
|
void lcd_remote_on(void)
|
|
{
|
|
if (semaphore_wait(&rc_thread_wakeup, 0) == OBJ_WAIT_TIMEDOUT ||
|
|
(rc_status & RC_FORCE_DETECT))
|
|
{
|
|
rc_status &= ~RC_FORCE_DETECT;
|
|
rc_status &= ~RC_POWER_OFF;
|
|
}
|
|
|
|
semaphore_release(&rc_thread_wakeup);
|
|
}
|
|
|
|
bool remote_detect(void)
|
|
{
|
|
return (rc_status & RC_DETECTED);
|
|
}
|
|
|
|
void lcd_remote_init_device(void)
|
|
{
|
|
/* reset */
|
|
remote_dev_enable(false);
|
|
rc_status |= RC_FORCE_DETECT; /* force detection at startup */
|
|
|
|
/* unknown */
|
|
GPIO_SET_BITWISE(GPIOL_ENABLE, 0x80);
|
|
GPIO_CLEAR_BITWISE(GPIOL_OUTPUT_VAL, 0x80);
|
|
GPIO_SET_BITWISE(GPIOL_OUTPUT_EN, 0x80);
|
|
|
|
/* a thread is required to poll & update the remote */
|
|
semaphore_init(&rc_thread_wakeup, 1, 0);
|
|
remote_thread_id = create_thread(remote_thread, remote_stack,
|
|
sizeof(remote_stack), 0, remote_thread_name
|
|
IF_PRIO(, PRIORITY_SYSTEM)
|
|
IF_COP(, CPU));
|
|
}
|
|
|
|
/* Update the display.
|
|
This must be called after all other LCD functions that change the display. */
|
|
void lcd_remote_update(void)
|
|
{
|
|
rc_status |= RC_UPDATE_LCD;
|
|
}
|
|
|
|
/* Update a fraction of the display. */
|
|
void lcd_remote_update_rect(int x, int y, int width, int height)
|
|
{
|
|
(void)x;
|
|
(void)y;
|
|
(void)width;
|
|
(void)height;
|
|
|
|
rc_status |= RC_UPDATE_LCD;
|
|
}
|
|
|
|
void remote_backlight_hw_on(void)
|
|
{
|
|
rc_status |= RC_BACKLIGHT_ON;
|
|
rc_status |= RC_UPDATE_CONTROLLER;
|
|
}
|
|
|
|
void remote_backlight_hw_off(void)
|
|
{
|
|
rc_status &= ~RC_BACKLIGHT_ON;
|
|
rc_status |= RC_UPDATE_CONTROLLER;
|
|
}
|