| .. |
|
archos/av300
|
Do some planned radio interface cleanup since adding in the LV24020LP.
|
2007-07-14 11:20:31 +00:00 |
|
ipod
|
Improved CPU clock setup for PP502x. PP5020 and PP5022 are not register compatible here, so define the PP5022 targets properly, and introduce a CPU_PP502x macro for easier family check. Improves stability on PP5020 (less freezing, tested with Mini G1) and reduces clock change penalty (500us on PP5020; uses the relock bit on PP5022).
|
2007-07-02 05:16:40 +00:00 |
|
iriver
|
Do some planned radio interface cleanup since adding in the LV24020LP.
|
2007-07-14 11:20:31 +00:00 |
|
pnx0101
|
Do some planned radio interface cleanup since adding in the LV24020LP.
|
2007-07-14 11:20:31 +00:00 |
|
s3c2440/gigabeat-fx
|
Gigabeat: Add the funky foreground color support for transparent bitmaps.
|
2007-07-15 01:06:04 +00:00 |
|
sandisk/sansa-e200
|
Some rewriting of the e200 ata driver. No more panicing. Faster card multiplexing. Some calculated yielding (further tuneable if needed). Hopefully more reliable in general. Easy revert if rebellious.
|
2007-07-25 06:15:07 +00:00 |
|
tatung/tpj1022
|
Moved archos backlight code to target tree. Changed old mutlivalue CONFIG_BACKLIGHT to a simple HAVE_BACKLIGHT.
|
2007-04-12 22:12:13 +00:00 |
|
ata-as-arm.S
|
Improved CPU clock setup for PP502x. PP5020 and PP5022 are not register compatible here, so define the PP5022 targets properly, and introduce a CPU_PP502x macro for easier family check. Improves stability on PP5020 (less freezing, tested with Mini G1) and reduces clock change penalty (500us on PP5020; uses the relock bit on PP5022).
|
2007-07-02 05:16:40 +00:00 |
|
ata-pp5002.c
|
put back the PP5002 specific ATA code that got lost during the ipod target tree move
|
2006-11-08 12:34:21 +00:00 |
|
ata-pp5020.c
|
Some more replacing of inl/outl with register #define's (doesn't change end-result binary). Add lots more #define's based on the ipodlinux wiki and some extrapolation.
|
2007-03-03 23:37:17 +00:00 |
|
ata-target.h
|
Improved CPU clock setup for PP502x. PP5020 and PP5022 are not register compatible here, so define the PP5022 targets properly, and introduce a CPU_PP502x macro for easier family check. Improves stability on PP5020 (less freezing, tested with Mini G1) and reduces clock change penalty (500us on PP5020; uses the relock bit on PP5022).
|
2007-07-02 05:16:40 +00:00 |
|
audio-pp.c
|
Straighten out some audio path APIs and misc. audio stuff. Having recording is not a prerequisite to having input/output source selection which is probably most useful when adding a audio input features like FM to a new port without forcing recording to be implemented first.
|
2007-06-08 23:42:04 +00:00 |
|
crt0-pp-bl.S
|
Add working dual-boot bootloaders for H10 and Sansa, which allow booting the OF and Rockbox. Rolo also works.
|
2006-12-19 11:33:53 +00:00 |
|
crt0-pp.S
|
FS#5472 add a memory size prompt to configure to allow ipod video builds for
|
2007-05-19 14:35:11 +00:00 |
|
crt0.S
|
Gigabeat: Use vectored IRQ mode interrupts and add a trap for unhandled ones.
|
2007-07-05 07:14:24 +00:00 |
|
i2c-pp.c
|
Change i2c config on e200. Seems to speed things up somewhat.
|
2007-05-17 22:49:27 +00:00 |
|
i2s-pp.c
|
e200: Use 16-16 L-R pairs when writing to the TX FIFO. Kill the channel swapping and clicks. Reduce number of FIQs. Should be adaptable to iPods and other PP targets in a few minutes work, eh?
|
2007-05-22 15:34:24 +00:00 |
|
memcpy-arm.S
|
ARM optimised memcpy/memmove from glibc. This should give increased performance on all ARM targets, especially iPod 5G
|
2007-01-13 23:57:14 +00:00 |
|
memmove-arm.S
|
ARM optimised memcpy/memmove from glibc. This should give increased performance on all ARM targets, especially iPod 5G
|
2007-01-13 23:57:14 +00:00 |
|
memset-arm.S
|
Removed executable flag
|
2007-01-09 23:29:07 +00:00 |
|
memset16-arm.S
|
Removed executable flag
|
2007-01-09 23:29:07 +00:00 |
|
memswap128-arm.S
|
SWCODEC: Get rid of extra swap buffer and get back 512K of RAM or 100K if the players RAM is <= 1MB. Make any needed changes to things to stabilize and facilitate this including removing flattening out initialization. Comment some things heavily. Fix a few logfs I didn't want to see the compiler complaining about.
|
2007-03-19 22:04:17 +00:00 |
|
pcm-pp.c
|
Temporary fix for FS#7257 and FS#7261 - playback resumes while paused when seeking
|
2007-07-05 10:19:06 +00:00 |
|
system-arm.h
|
Gigabeat: Add timer functionality. Rework tick timer setup to be exactly 100Hz. Metronome should work now but some pcm changes are needed to have faster tocks work correctly (in the works).
|
2007-07-06 21:36:32 +00:00 |
|
system-pp502x.c
|
Stop the crashes on some PP5022C targets (iPod Video, perhaps also Nano) introduced by the recent clock setup changes. Looks like some revisions of the chip don't reset the PLL_locked bit immediately after PLL setup.
|
2007-07-07 05:58:29 +00:00 |
|
system-pp5002.c
|
iPod G3: Set the 'we (pretend to) know what we're doing so please let us' magic value. Aka unlock clock frequencies > 66MHz. Should make performance significantly better with problematic codecs.
|
2007-07-10 23:39:37 +00:00 |
|
system-target.h
|
Improved CPU clock setup for PP502x. PP5020 and PP5022 are not register compatible here, so define the PP5022 targets properly, and introduce a CPU_PP502x macro for easier family check. Improves stability on PP5020 (less freezing, tested with Mini G1) and reduces clock change penalty (500us on PP5020; uses the relock bit on PP5022).
|
2007-07-02 05:16:40 +00:00 |
|
usb-pp.c
|
build with -Wundef to make sure we have spelled the defines right in #if lines
|
2007-02-17 21:54:17 +00:00 |
|
usb-target.h
|
Fix USB detection on ipods and other portalplayer targets - Rockbox now correctly distinguishes between a USB connection to a computer and a connection to a USB AC charger. Based on the experimental USB code in FS #6494 by Barry Wardell. Closes FS #4724.
|
2007-02-04 21:46:01 +00:00 |
|
wmcodec-pp.c
|
Improved CPU clock setup for PP502x. PP5020 and PP5022 are not register compatible here, so define the PP5022 targets properly, and introduce a CPU_PP502x macro for easier family check. Improves stability on PP5020 (less freezing, tested with Mini G1) and reduces clock change penalty (500us on PP5020; uses the relock bit on PP5022).
|
2007-07-02 05:16:40 +00:00 |
ea0d2cf7d6