rockbox/firmware/target/coldfire/iriver/h100/adc-h100.c
Jonathan Gordon 139f9f28e9 move the iriver h1x0/h3x0 targets to the target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11392 a1c6a512-1295-4272-9138-f99709370657
2006-10-30 08:56:06 +00:00

117 lines
2.6 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by Linus Nielsen Feltzing
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "cpu.h"
#include "system.h"
#include "kernel.h"
#include "thread.h"
#include "adc.h"
static unsigned char adcdata[NUM_ADC_CHANNELS];
#define CS_LO and_l(~0x80, &GPIO_OUT)
#define CS_HI or_l(0x80, &GPIO_OUT)
#define CLK_LO and_l(~0x00400000, &GPIO_OUT)
#define CLK_HI or_l(0x00400000, &GPIO_OUT)
#define DO (GPIO_READ & 0x80000000)
#define DI_LO and_l(~0x00200000, &GPIO_OUT)
#define DI_HI or_l(0x00200000, &GPIO_OUT)
/* delay loop */
#define DELAY do { int _x; for(_x=0;_x<10;_x++);} while (0)
unsigned short adc_scan(int channel)
{
unsigned char data = 0;
int i;
CS_LO;
DI_HI; /* Start bit */
DELAY;
CLK_HI;
DELAY;
CLK_LO;
DI_HI; /* Single channel */
DELAY;
CLK_HI;
DELAY;
CLK_LO;
if(channel & 1) /* LSB of channel number */
DI_HI;
else
DI_LO;
DELAY;
CLK_HI;
DELAY;
CLK_LO;
if(channel & 2) /* MSB of channel number */
DI_HI;
else
DI_LO;
DELAY;
CLK_HI;
DELAY;
CLK_LO;
DELAY;
for(i = 0;i < 8;i++) /* 8 bits of data */
{
CLK_HI;
DELAY;
CLK_LO;
DELAY;
data <<= 1;
data |= DO?1:0;
}
CS_HI;
adcdata[channel] = data;
return data;
}
unsigned short adc_read(int channel)
{
return adcdata[channel];
}
static int adc_counter;
static void adc_tick(void)
{
if(++adc_counter == HZ)
{
adc_counter = 0;
adc_scan(ADC_BATTERY);
adc_scan(ADC_REMOTEDETECT); /* Temporary. Remove when the remote
detection feels stable. */
}
}
void adc_init(void)
{
adc_scan(ADC_BATTERY);
tick_add_task(adc_tick);
}