01650b8bc9
* SAMPR_CAPS_ALL -> SAMPR_CAPS_ALL_48/96/192 * All targets claiming SAMPR_CAPS_ALL now get appropriate subset * No need to explicitly define HAVE_PLAY_FREQ * Rates that are a multiple of 44 or 48KHz can be used for playback Inspired by a patch by Roman Stolyarov, but substantially rewritten by myself. Change-Id: Iaca7363521b1cb9921e047ba1004d3cbe9c9c23e
219 lines
5.6 KiB
C
219 lines
5.6 KiB
C
/*
|
|
* This config file is for xDuoo X3
|
|
*/
|
|
|
|
#define MODEL_NAME "xDuoo X3"
|
|
#define MODEL_NUMBER 96
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
|
|
/* Support FAT16 for SD cards <= 2GB */
|
|
#define HAVE_FAT16SUPPORT
|
|
|
|
/* ChinaChip NAND FTL */
|
|
#define CONFIG_NAND NAND_CC
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* define this if the target has volume keys which can be used in the lists */
|
|
#define HAVE_VOLUME_IN_LIST
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 128
|
|
#define LCD_HEIGHT 64
|
|
/* sqrt(128^2 + 64^2) / 1.0 = 143.1 */
|
|
#define LCD_DPI 143
|
|
#define LCD_DEPTH 1
|
|
|
|
#define LCD_PIXELFORMAT VERTICAL_PACKING
|
|
#define HAVE_NEGATIVE_LCD /* bright on dark */
|
|
|
|
/* Display colours, for screenshots and sim (0xRRGGBB) */
|
|
#define LCD_DARKCOLOR 0x000000
|
|
#define LCD_BRIGHTCOLOR 0x000000
|
|
#define LCD_BL_DARKCOLOR 0x000000
|
|
#define LCD_BL_BRIGHTCOLOR 0x0de2e5
|
|
|
|
/* Define this if your LCD can set contrast */
|
|
#define HAVE_LCD_CONTRAST
|
|
|
|
#define MIN_CONTRAST_SETTING -9
|
|
#define MAX_CONTRAST_SETTING -1
|
|
#define DEFAULT_CONTRAST_SETTING -6
|
|
|
|
/* define this if you have LCD enable function */
|
|
#define HAVE_LCD_ENABLE
|
|
|
|
#ifndef BOOTLOADER
|
|
/* Define this if your LCD can be put to sleep.
|
|
* HAVE_LCD_ENABLE should be defined as well. */
|
|
#define HAVE_LCD_SLEEP
|
|
#define HAVE_LCD_SLEEP_SETTING
|
|
#endif
|
|
|
|
/* define this if you can flip your LCD */
|
|
#define HAVE_LCD_FLIP
|
|
|
|
/* define this if you can invert the pixels */
|
|
#define HAVE_LCD_INVERT
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
#define HAVE_BACKLIGHT_BRIGHTNESS
|
|
|
|
/* Which backlight fading type? */
|
|
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
|
|
|
|
#define IRAM_LCDFRAMEBUFFER IDATA_ATTR /* put the lcd frame buffer in IRAM */
|
|
|
|
/* Define this if you can detect headphones */
|
|
#define HAVE_HEADPHONE_DETECTION
|
|
|
|
/* Define this if you can detect lineout */
|
|
#define HAVE_LINEOUT_DETECTION
|
|
|
|
#define CONFIG_KEYPAD XDUOO_X3_PAD
|
|
|
|
/* Define this if a programmable hotkey is mapped */
|
|
#define HAVE_HOTKEY
|
|
|
|
|
|
|
|
|
|
#ifndef BOOTLOADER
|
|
/* define this if you have a real-time clock */
|
|
#define CONFIG_RTC RTC_JZ4760
|
|
#endif
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x100000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x100000
|
|
|
|
#define HAVE_CS4398
|
|
#define CODEC_SLAVE
|
|
|
|
/* has no tone controls, so we use the software ones */
|
|
#define HAVE_SW_TONE_CONTROLS
|
|
|
|
/* define the bitmask of hardware sample rates */
|
|
#define HW_SAMPR_CAPS SAMPR_CAP_ALL_96
|
|
|
|
#define AB_REPEAT_ENABLE
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 2000 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 500 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 2000 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 100 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 2 /* Two types (2000mAh and 1500mAh) */
|
|
|
|
#define CURRENT_NORMAL 167 // 2.78mA * 60s
|
|
#define CURRENT_BACKLIGHT 180 // 15mA * 60s
|
|
#define CURRENT_MAX_CHG 500 // bursts higher if needed
|
|
|
|
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
|
|
|
|
/* Hardware controlled charging with monitoring */
|
|
#define CONFIG_CHARGING CHARGING_MONITOR
|
|
|
|
/* There is only USB charging */
|
|
#define HAVE_USB_POWER
|
|
|
|
#define CFG_EXTAL 12000000 /* EXT clock: 12 Mhz */
|
|
|
|
/* define this if the flash memory uses the SecureDigital Memory Card protocol */
|
|
#define CONFIG_STORAGE (STORAGE_SD /* | STORAGE_NAND */)
|
|
|
|
#define HAVE_MULTIDRIVE
|
|
#define CONFIG_STORAGE_MULTI
|
|
#define NUM_DRIVES 2
|
|
|
|
/* Define this if media can be exchanged on the fly */
|
|
#ifndef BOOTLOADER
|
|
#define HAVE_HOTSWAP
|
|
#define HAVE_HOTSWAP_STORAGE_AS_MAIN
|
|
#endif
|
|
|
|
/* define this if you have a flash memory storage */
|
|
#define HAVE_FLASH_STORAGE
|
|
|
|
/** Non-simulator section **/
|
|
#ifndef SIMULATOR
|
|
|
|
/* Define this if you have a Ingenic JZ4760B */
|
|
#define CONFIG_CPU JZ4760B
|
|
|
|
/* If we have adjustable frequency */
|
|
#define CPUFREQ_MAX 480000000 // datasheet sez 600MHz max. Must be multiple of 48!
|
|
#define CPUFREQ_MIN 192000000
|
|
#define CPUFREQ_NORMAL CPUFREQ_MIN
|
|
|
|
#ifndef BOOTLOADER
|
|
//#define HAVE_ADJUSTABLE_CPU_FREQ
|
|
//#define HAVE_GUI_BOOST
|
|
#endif
|
|
|
|
#ifdef HAVE_ADJUSTABLE_CPU_FREQ
|
|
#define CPUFREQ_DEFAULT CPUFREQ_MIN
|
|
#else
|
|
#define CPUFREQ_DEFAULT CPUFREQ_MAX
|
|
#define CPU_FREQ CPUFREQ_MAX
|
|
#endif
|
|
|
|
/* Define this if you want to use the JZ47XX i2c interface */
|
|
#define CONFIG_I2C I2C_JZ47XX
|
|
|
|
#define NEED_ADC_CLOSE 1
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
/* #define HAVE_POWEROFF_WHILE_CHARGING */
|
|
|
|
/* Type of LCD */
|
|
#define CONFIG_LCD LCD_XDUOOX3
|
|
|
|
/* USB On-the-go */
|
|
#define CONFIG_USBOTG USBOTG_JZ4760
|
|
|
|
/* enable these for the experimental usb stack */
|
|
#define HAVE_USBSTACK
|
|
#define HAVE_BOOTLOADER_USB_MODE
|
|
|
|
/* Connect by events, not by tick polling */
|
|
#define USB_STATUS_BY_EVENT
|
|
|
|
#define USB_VENDOR_ID 0x0525
|
|
#define USB_PRODUCT_ID 0xA4A5
|
|
|
|
#define USB_NUM_ENDPOINTS 3
|
|
#define USB_DEVBSS_ATTR IBSS_ATTR
|
|
|
|
#define BOOTFILE_EXT "x3"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
#define INCLUDE_TIMEOUT_API
|
|
|
|
#define ICODE_ATTR_TREMOR_NOT_MDCT
|
|
|
|
#endif /* SIMULATOR */
|
|
|
|
/** Port-specific settings **/
|
|
|
|
#define CONFIG_SDRAM_START 0x80004000
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
#define MIN_BRIGHTNESS_SETTING 1
|
|
#define MAX_BRIGHTNESS_SETTING 16
|
|
#define DEFAULT_BRIGHTNESS_SETTING 16 /* "full brightness" */
|