| .. |
|
archos/av300
|
Rework ATA driver to get rid of lots of target-specific constants and allow for non-memory-mapped task file registers.
|
2011-01-02 22:51:47 +00:00 |
|
as3525
|
Sansa AMSv2: set internal voltages PVDD1 and AVDD17 to the same value as the OF does.
|
2011-10-12 20:09:19 +00:00 |
|
at91sam
|
Switch to SYS mode on arm FS#12322 by me
|
2011-10-11 16:06:03 +00:00 |
|
imx31
|
Expunge a commented #include that found its way in in r30771.
|
2011-10-17 15:48:41 +00:00 |
|
imx233
|
imx233/fuze+: move to a more generic xtal derived clock enabling function, fix timrot accordingly
|
2011-10-18 22:00:50 +00:00 |
|
ipod
|
ipod nano 1g: enable readout of battery current through ADC channel 4066_ISTAT
|
2011-07-24 17:32:50 +00:00 |
|
iriver
|
Convert PortalPlayer iRivers to use USB-mode enabled bootloader. The H10 5/6GB already has a pre-boot USB mode (so it's a little redundant there) but building them the same way is simpler.
|
2011-01-17 06:50:27 +00:00 |
|
olympus
|
Merge functionality of wakeups and semaphores-- fewer APIs and object types. semaphore_wait takes a timeout now so codecs and plugins have to be made incompatible. Don't make semaphores for targets not using them.
|
2011-03-02 08:49:38 +00:00 |
|
pbell
|
Get the last warning for vibe 500 bootloader.
|
2011-01-15 09:11:38 +00:00 |
|
philips
|
HDD6330: improve the behavior of the lcd during shutdown.
|
2011-09-20 10:32:58 +00:00 |
|
pnx0101
|
Switch to SYS mode on arm FS#12322 by me
|
2011-10-11 16:06:03 +00:00 |
|
rk27xx
|
Add HiFiMAN HM-60x target(s). FS#12319 by Andrew Ryabinin with some (small) modification by me. This also splits rk27xx lcd driver into lcdif-rk27xx and lcd controller specific part. Some modifications to the pcm driver have been made to allow using codecs in slave mode (as TDA1543 used in hifiman is slave only i2s codec).
|
2011-10-17 10:32:19 +00:00 |
|
s3c2440
|
Switch to SYS mode on arm FS#12322 by me
|
2011-10-11 16:06:03 +00:00 |
|
s5l8700
|
Switch to SYS mode on arm FS#12322 by me
|
2011-10-11 16:06:03 +00:00 |
|
s5l8702
|
Switch to SYS mode on arm FS#12322 by me
|
2011-10-11 16:06:03 +00:00 |
|
samsung
|
*/app.lds: remove STUBOFFSET
|
2010-09-20 17:09:55 +00:00 |
|
sandisk
|
Rework c200wipe to use proper partitioning and formatting code, which makes the code size-independent.
|
2011-09-02 21:34:28 +00:00 |
|
tatung
|
*/app.lds: remove STUBOFFSET
|
2010-09-20 17:09:55 +00:00 |
|
tcc77x
|
Switch to SYS mode on arm FS#12322 by me
|
2011-10-11 16:06:03 +00:00 |
|
tcc780x
|
Switch to SYS mode on arm FS#12322 by me
|
2011-10-11 16:06:03 +00:00 |
|
tms320dm320
|
Switch to SYS mode on arm FS#12322 by me
|
2011-10-11 16:06:03 +00:00 |
|
adc-as3514.c
|
adc-as3514.c: cosmetics
|
2010-05-15 19:44:54 +00:00 |
|
adc-pp5020.c
|
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
|
2010-01-18 19:05:20 +00:00 |
|
ascodec-pp.c
|
|
|
|
ascodec-target.h
|
as3514/as3543 fixes
|
2010-05-17 20:53:25 +00:00 |
|
ata-as-arm.S
|
FS#11335 by me: make ARM assembly functions thumb-friendly
|
2010-06-11 04:41:36 +00:00 |
|
ata-nand-telechips.c
|
GSoC/Buflib: Add buflib memory alocator to the core.
|
2011-08-30 14:01:33 +00:00 |
|
ata-pp5002.c
|
|
|
|
ata-pp5020.c
|
Fix or at least significantly improve FS#11830. With introduction of ATA DMA for PP502x a special treatment of the IDE0_CFG register for the iPod nano (see FS#7510) was lost.
|
2011-01-21 23:32:57 +00:00 |
|
ata-sd-pp.c
|
All kernel objects in code shared amongs targets (core, plugins, codecs) should be declared SHAREDBSS_ATTR as any core could potentially touch them even though they seem only to involve threads on one core. The exception is target code for particular CPUs where proper allocation is fixed. playlist.c was a little odd too-- use one mutex for the current playlist and a separate one for created playlists (still pondering the necessity of more than one).
|
2011-02-14 11:27:45 +00:00 |
|
ata-target.h
|
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
|
2011-01-15 08:19:30 +00:00 |
|
audio-pp.c
|
correction on DEFINE, thanks to Kugel who spotted it ;)
|
2009-12-01 18:11:06 +00:00 |
|
bits-armv4.S
|
Add ARMv4 16-bit(set, mod, clr) operations used on DM320.
|
2011-02-06 19:43:45 +00:00 |
|
bits-armv6.S
|
Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.
|
2010-06-30 02:02:46 +00:00 |
|
boot-pp502x-bl-usb.lds
|
e200v1 seems to be ok using USB-enabled bootloader. Also, include the bootloader USB .lds into the boot.lds instead of pasting into every one to keep things sane for now-- commented upon inside.
|
2011-01-16 01:40:15 +00:00 |
|
crt0-pp-bl.S
|
Switch to SYS mode on arm FS#12322 by me
|
2011-10-11 16:06:03 +00:00 |
|
crt0-pp.S
|
Switch to SYS mode on arm FS#12322 by me
|
2011-10-11 16:06:03 +00:00 |
|
crt0-pp502x-bl-usb.S
|
Switch to SYS mode on arm FS#12322 by me
|
2011-10-11 16:06:03 +00:00 |
|
crt0.S
|
Switch to SYS mode on arm FS#12322 by me
|
2011-10-11 16:06:03 +00:00 |
|
debug-pp.c
|
ipod nano 1g: enable readout of battery current through ADC channel 4066_ISTAT
|
2011-07-24 17:32:50 +00:00 |
|
debug-target.h
|
Move dbg_hw_info() into target tree. FS#11735 by me
|
2011-06-05 10:26:06 +00:00 |
|
ffs-arm.S
|
ARM <= v5: Tiny optimisation exploiting the location of the table.
|
2009-12-26 13:22:51 +00:00 |
|
i2c-pp.c
|
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
|
2010-01-18 19:05:20 +00:00 |
|
i2c-telechips.c
|
Re-write the Telechips I2C delay routine in assembler to stop the compiler optimising it away. Tested with EABI and non-EABI compilers.
|
2010-06-16 21:03:57 +00:00 |
|
i2s-pp.c
|
e200v1/c200v1: Implement limited samplerate switching. Rates 24kHz and below are being a bear as far as minor crackling at higher amplitude-- leave them out for the time being since no solution is currently evident. 48, 44, 32 (rec rates 24, 22, 16) seem perfectly fine. I'm betting c200 is ok to include because it uses the same setup as e200.
|
2010-06-26 10:07:17 +00:00 |
|
kernel-pp.c
|
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
|
2011-01-15 08:19:30 +00:00 |
|
lcd-as-memframe.S
|
FS#11335 by me: make ARM assembly functions thumb-friendly
|
2010-06-11 04:41:36 +00:00 |
|
lcd-c200_c200v2.c
|
udelay between command and data write seems to get rid of the display glitches on C200v2
|
2010-06-27 03:24:56 +00:00 |
|
lcd-ssd1815.c
|
|
|
|
memcpy-arm.S
|
FS#11335 by me: make ARM assembly functions thumb-friendly
|
2010-06-11 04:41:36 +00:00 |
|
memmove-arm.S
|
FS#11335 by me: make ARM assembly functions thumb-friendly
|
2010-06-11 04:41:36 +00:00 |
|
memset-arm.S
|
FS#11335 by me: make ARM assembly functions thumb-friendly
|
2010-06-11 04:41:36 +00:00 |
|
memset16-arm.S
|
FS#11335 by me: make ARM assembly functions thumb-friendly
|
2010-06-11 04:41:36 +00:00 |
|
mmu-arm.h
|
Rename cache coherency functions.
|
2010-09-08 17:05:49 +00:00 |
|
mmu-arm.S
|
imx233/fuze+: prepare target to enable MMU
|
2011-07-23 11:45:18 +00:00 |
|
mmu-armv6.S
|
Fix beast, forgot the asm label when renaming.
|
2010-09-09 17:00:50 +00:00 |
|
pcm-mixer-armv4.c
|
Commit FS#12150 - Fully-functional audio mixer - and finally whip old limitations about playback of voice and other sounds when paused. Channels are independent in state and amplitude. Fade on stop/pause is handled by the channel's volume control rather than global volume which means it now works from anywhere. Opens up the possibility of plugin sounds during music playback by merely adding an additional channel enum. If any PCM drivers were not properly modified, see one of the last comments in the task for a description of the simple change that is expected. Some params are tunable in firmware/export/pcm-mixer.h as well.
|
2011-06-29 06:37:04 +00:00 |
|
pcm-mixer-armv5.c
|
Commit FS#12150 - Fully-functional audio mixer - and finally whip old limitations about playback of voice and other sounds when paused. Channels are independent in state and amplitude. Fade on stop/pause is handled by the channel's volume control rather than global volume which means it now works from anywhere. Opens up the possibility of plugin sounds during music playback by merely adding an additional channel enum. If any PCM drivers were not properly modified, see one of the last comments in the task for a description of the simple change that is expected. Some params are tunable in firmware/export/pcm-mixer.h as well.
|
2011-06-29 06:37:04 +00:00 |
|
pcm-mixer-armv6.c
|
Commit FS#12150 - Fully-functional audio mixer - and finally whip old limitations about playback of voice and other sounds when paused. Channels are independent in state and amplitude. Fade on stop/pause is handled by the channel's volume control rather than global volume which means it now works from anywhere. Opens up the possibility of plugin sounds during music playback by merely adding an additional channel enum. If any PCM drivers were not properly modified, see one of the last comments in the task for a description of the simple change that is expected. Some params are tunable in firmware/export/pcm-mixer.h as well.
|
2011-06-29 06:37:04 +00:00 |
|
pcm-pp.c
|
Oops. "void void" doesn't work in C :p.
|
2011-09-01 12:20:52 +00:00 |
|
pcm-telechips.c
|
Shuffle some functions around so that interfacing with playback.c in particular isn't required. Though playback does finish the audio init, pcm doesn't care who does it.
|
2011-09-01 12:15:43 +00:00 |
|
powermgmt-ascodec.c
|
Sansa AMSv2: initialise PMU (power management unit), inspired by how the OF does it
|
2011-09-18 15:33:19 +00:00 |
|
sd-pp-target.h
|
|
|
|
support-arm.S
|
ARM: __div0() takes no argument
|
2010-06-12 17:15:39 +00:00 |
|
system-arm.c
|
Switch to SYS mode on arm FS#12322 by me
|
2011-10-11 16:06:03 +00:00 |
|
system-arm.h
|
Merge functionality of wakeups and semaphores-- fewer APIs and object types. semaphore_wait takes a timeout now so codecs and plugins have to be made incompatible. Don't make semaphores for targets not using them.
|
2011-03-02 08:49:38 +00:00 |
|
system-pp502x.c
|
Add a higher level USB detection that prevents fraudulent bus resets from causing USB mode to be entered. Enable for SA9200 only at this time. Also, for SA9200, use the bus power GPIO rather than the 'connector inserted' GPIO to detect the cable.
|
2011-01-17 12:24:41 +00:00 |
|
system-pp5002.c
|
Rename cache coherency functions.
|
2010-09-08 17:05:49 +00:00 |
|
system-target.h
|
Set the default battery capacity for ipod video properly depending on detected RAM size.
|
2011-07-19 20:48:16 +00:00 |
|
thread-arm.c
|
Changed #warning to a TODO comment.
|
2011-10-05 14:42:18 +00:00 |
|
thread-pp.c
|
Clean up multiple definitions of RAM size. Remove -DMEM (make) and MEM (code), use the already defined MEMORYSIZE instead.
|
2011-02-02 17:43:32 +00:00 |
|
timer-pp.c
|
|
|
|
usb-drv-arc.c
|
Add missing usb_drv_init(), fixes FS#12303.
|
2011-10-03 06:14:48 +00:00 |
|
usb-fw-pp502x.c
|
Remove obsolete USB_DETECT_BY_DRV define throughout.
|
2011-09-14 16:42:43 +00:00 |
|
usb-fw-pp5002.c
|
Fix r29053 red and a leftover use of 'usb' variable as a bool rather than int in main-pp.c.
|
2011-01-15 08:52:59 +00:00 |
|
usb-s3c6400x.c
|
Merge functionality of wakeups and semaphores-- fewer APIs and object types. semaphore_wait takes a timeout now so codecs and plugins have to be made incompatible. Don't make semaphores for targets not using them.
|
2011-03-02 08:49:38 +00:00 |
|
usb-target.h
|
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
|
2011-01-15 08:19:30 +00:00 |
|
usb-tcc.c
|
Various minor cleanups for cowon d2
|
2010-08-01 09:33:29 +00:00 |
|
wmcodec-pp.c
|
FS#11417 by Joe Balough: fix audio/tuner on philips hdd6330
|
2010-06-19 03:51:57 +00:00 |
|
wmcodec-telechips.c
|
|
|
d0e8c35862