7abf2b53a4
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25547 a1c6a512-1295-4272-9138-f99709370657
67 lines
2.1 KiB
C
67 lines
2.1 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Gigabeat S specific code for the WM8978 codec
|
|
*
|
|
* Copyright (C) 2008 Michael Sevakis
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "config.h"
|
|
#include "system.h"
|
|
#include "kernel.h"
|
|
#include "sound.h"
|
|
#include "wmcodec.h"
|
|
#include "i2s.h"
|
|
#include "i2c-imx31.h"
|
|
|
|
/* NOTE: Some port-specific bits will have to be moved away (node and GPIO
|
|
* writes) for cleanest implementation. */
|
|
|
|
static struct i2c_node wm8978_i2c_node =
|
|
{
|
|
.num = I2C1_NUM,
|
|
.ifdr = I2C_IFDR_DIV192, /* 66MHz/.4MHz = 165, closest = 192 = 343750Hz */
|
|
/* Just hard-code for now - scaling may require
|
|
* updating */
|
|
.addr = WMC_I2C_ADDR,
|
|
};
|
|
|
|
void audiohw_init(void)
|
|
{
|
|
i2s_reset();
|
|
|
|
i2c_enable_node(&wm8978_i2c_node, true);
|
|
|
|
audiohw_preinit();
|
|
|
|
imx31_regset32(&GPIO3_DR, (1 << 21)); /* Turn on analogue LDO */
|
|
}
|
|
|
|
void audiohw_enable_headphone_jack(bool enable)
|
|
{
|
|
/* Turn headphone jack output on or off. */
|
|
imx31_regmod32(&GPIO3_DR, enable ? (1 << 22) : 0, (1 << 22));
|
|
}
|
|
|
|
void wmcodec_write(int reg, int data)
|
|
{
|
|
unsigned char d[2];
|
|
/* |aaaaaaad|dddddddd| */
|
|
d[0] = (reg << 1) | ((data & 0x100) >> 8);
|
|
d[1] = data;
|
|
i2c_write(&wm8978_i2c_node, d, 2);
|
|
}
|