3def8fee8c
HAVE_LOCKED_ACTIIONS requires !defined(HAVE_HOLD_BUTTON) Change-Id: I1e98c282f17d11f08ea80cd5963b331a3ae19387
226 lines
6.2 KiB
C
226 lines
6.2 KiB
C
/*
|
|
* This config file is for the Sandisk Sansa Clip v2
|
|
*/
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 60
|
|
#define MODEL_NAME "Sandisk Sansa Clipv2"
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
/* Define if boot data from bootloader has been enabled for the target */
|
|
#define HAVE_BOOTDATA
|
|
|
|
#define HW_SAMPR_CAPS SAMPR_CAP_ALL_96
|
|
|
|
/* define this if you have recording possibility */
|
|
#define HAVE_RECORDING
|
|
|
|
#define REC_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
|
|
SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
|
|
SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
|
|
|
|
/* because the samplerates don't match at each point, we must be able to
|
|
* tell PCM which set of rates to use. not needed if recording rates are
|
|
* a simple subset of playback rates and are equal values. */
|
|
#define CONFIG_SAMPR_TYPES
|
|
|
|
/* Define bitmask of input sources - recordable bitmask can be defined
|
|
explicitly if different */
|
|
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
|
|
|
|
|
|
|
|
|
|
/* define this if you have a light associated with the buttons */
|
|
#define HAVE_BUTTON_LIGHT
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 128
|
|
#define LCD_HEIGHT 64
|
|
/* sqrt(128^2 + 64^2) / 1.0 = 143.1 */
|
|
#define LCD_DPI 143
|
|
#define LCD_DEPTH 1
|
|
|
|
#define LCD_PIXELFORMAT VERTICAL_PACKING
|
|
#define HAVE_NEGATIVE_LCD /* bright on dark */
|
|
#define HAVE_LCD_SPLIT /* split display */
|
|
|
|
/* Display colours, for screenshots and sim (0xRRGGBB) */
|
|
#define LCD_DARKCOLOR 0x000000
|
|
#define LCD_BRIGHTCOLOR 0x000000
|
|
#define LCD_BL_DARKCOLOR 0x000000
|
|
#define LCD_BL_BRIGHTCOLOR 0x0de2e5
|
|
|
|
#define LCD_DARKCOLOR_2 0x000000
|
|
#define LCD_BRIGHTCOLOR_2 0x000000
|
|
#define LCD_BL_DARKCOLOR_2 0x000000
|
|
#define LCD_BL_BRIGHTCOLOR_2 0xffe60f
|
|
|
|
#define LCD_SPLIT_POS 16
|
|
#define LCD_SPLIT_LINES 2
|
|
|
|
/* define this if you have LCD enable function */
|
|
#define HAVE_LCD_ENABLE
|
|
|
|
#ifndef BOOTLOADER
|
|
/* Define this if your LCD can be put to sleep.
|
|
* HAVE_LCD_ENABLE should be defined as well. */
|
|
//#define HAVE_LCD_SLEEP
|
|
//#define HAVE_LCD_SLEEP_SETTING
|
|
#endif
|
|
|
|
/* define this if you can flip your LCD */
|
|
#define HAVE_LCD_FLIP
|
|
|
|
/* define this if you can invert the pixels */
|
|
#define HAVE_LCD_INVERT
|
|
|
|
/* Define this if your LCD can set contrast */
|
|
#define HAVE_LCD_CONTRAST
|
|
|
|
#define MIN_CONTRAST_SETTING 0
|
|
#define MAX_CONTRAST_SETTING 50
|
|
#define DEFAULT_CONTRAST_SETTING 30
|
|
|
|
#define IRAM_LCDFRAMEBUFFER IDATA_ATTR /* put the lcd frame buffer in IRAM */
|
|
|
|
#define CONFIG_KEYPAD SANSA_CLIP_PAD
|
|
|
|
/* define this if the target has volume keys which can be used in the lists */
|
|
#define HAVE_VOLUME_IN_LIST
|
|
|
|
#define HAVE_GUI_BOOST
|
|
|
|
|
|
|
|
/* There is no hardware tone control */
|
|
#define HAVE_SW_TONE_CONTROLS
|
|
|
|
/* AS3514 or newer */
|
|
#define HAVE_AS3514
|
|
#define HAVE_AS3543
|
|
|
|
#ifndef BOOTLOADER
|
|
/* define this if you have a real-time clock */
|
|
#define CONFIG_RTC RTC_AS3514
|
|
|
|
/* Define if the device can wake from an RTC alarm */
|
|
#define HAVE_RTC_ALARM
|
|
#endif
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
#define HAVE_FAT16SUPPORT
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE (0x100000-0x8000)
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
#define AB_REPEAT_ENABLE
|
|
|
|
/* FM Tuner */
|
|
#define CONFIG_TUNER SI4700 /* in fact SI4702 */
|
|
//#define HAVE_TUNER_PWR_CTRL
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
|
|
/* define this if you have a flash memory storage */
|
|
#define HAVE_FLASH_STORAGE
|
|
|
|
/* define this if the flash memory uses the SecureDigital Memory Card protocol */
|
|
#define CONFIG_STORAGE STORAGE_SD
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 380 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 380 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 380 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
|
|
|
|
/* Charging implemented in a target-specific algorithm */
|
|
#define CONFIG_CHARGING CHARGING_TARGET
|
|
|
|
/* define this if the unit can be powered or charged via USB */
|
|
#define HAVE_USB_POWER
|
|
|
|
/** Non-simulator section **/
|
|
#ifndef SIMULATOR
|
|
|
|
/* Define this if you have a AMS AS3525v2 SoC */
|
|
#define CONFIG_CPU AS3525v2
|
|
|
|
/* Define this if you want to use the AS3525 i2c interface */
|
|
#define CONFIG_I2C I2C_AS3525
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
#define HAVE_POWEROFF_WHILE_CHARGING
|
|
|
|
/* define current usage levels (based on battery bench) */
|
|
#define CURRENT_NORMAL 11
|
|
#define CURRENT_BACKLIGHT 15
|
|
#define CURRENT_RECORD 11
|
|
|
|
/* maximum charging current */
|
|
#define CURRENT_MAX_CHG 150
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 192000000
|
|
|
|
/* Type of LCD */
|
|
#define CONFIG_LCD LCD_SSD1303
|
|
|
|
/* USB On-the-go */
|
|
#define CONFIG_USBOTG USBOTG_DESIGNWARE
|
|
/* logf() over USB serial (http://www.rockbox.org/wiki/PortalPlayerUsb) */
|
|
//#define USB_ENABLE_SERIAL
|
|
|
|
/* enable these for the experimental usb stack */
|
|
#define HAVE_USBSTACK
|
|
#define USB_VENDOR_ID 0x0781
|
|
#define USB_PRODUCT_ID 0x7435
|
|
#define HAVE_BOOTLOADER_USB_MODE
|
|
|
|
/* Virtual LED (icon) */
|
|
#define CONFIG_LED LED_VIRTUAL
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
#define HAVE_ADJUSTABLE_CPU_FREQ
|
|
|
|
/*define this to enable CPU voltage scaling on AMS devices*/
|
|
#define HAVE_ADJUSTABLE_CPU_VOLTAGE
|
|
|
|
#define BOOTFILE_EXT "sansa"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
#define ICODE_ATTR_TREMOR_NOT_MDCT
|
|
|
|
#define INCLUDE_TIMEOUT_API
|
|
|
|
#endif /* SIMULATOR */
|
|
|
|
/** Port-specific settings **/
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
#define MIN_BRIGHTNESS_SETTING 1
|
|
#define MAX_BRIGHTNESS_SETTING 12
|
|
#define DEFAULT_BRIGHTNESS_SETTING 6
|
|
|
|
/* Default recording levels */
|
|
#define DEFAULT_REC_MIC_GAIN 23
|
|
#define DEFAULT_REC_LEFT_GAIN 23
|
|
#define DEFAULT_REC_RIGHT_GAIN 23
|
|
|
|
/* Define this if a programmable hotkey is mapped */
|
|
#define HAVE_HOTKEY
|