4dc602dd7f
Tested on eros q, everything measured from line out, open circuit. - volume steps were approximately double the dB they were labelled as, so "-2 dB" would result in a change of about -4 dB from maximum (0, +6.2dBV) - maximum volume defining the line out volume only changed every 10 values, and then was not close to correct- "-10 dB" resulted in -2.5 dB from maximum This gets the volume dB approximately correct, and maximum volume correctly sets the line out volume. I was unable to get odd values in the max volume to work, so set the step size to 2 instead of one. For "consumer level" (-10dBV), set to -16. For "Pro level" (+4dBu -> ~1.8dBV), set to -4. Change-Id: I898b85d768153579a893b23551019af88f865d21
202 lines
4.7 KiB
C
202 lines
4.7 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
*
|
|
* Copyright (c) 2018 Marcin Bukat
|
|
* Copyright (c) 2020 Solomon Peachy
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
//#define LOGF_ENABLE
|
|
|
|
#include "config.h"
|
|
#include "audio.h"
|
|
#include "audiohw.h"
|
|
#include "system.h"
|
|
#include "panic.h"
|
|
#include "sysfs.h"
|
|
#include "alsa-controls.h"
|
|
#include "pcm-alsa.h"
|
|
#include "settings.h"
|
|
|
|
#include "logf.h"
|
|
|
|
/*
|
|
PCM device hw:0,0
|
|
|
|
ACCESS: MMAP_INTERLEAVED RW_INTERLEAVED
|
|
FORMAT: S16_LE S24_LE
|
|
SUBFORMAT: STD
|
|
SAMPLE_BITS: [16 32]
|
|
FRAME_BITS: [16 64]
|
|
CHANNELS: [1 2]
|
|
RATE: [8000 192000]
|
|
PERIOD_TIME: (2666 8192000]
|
|
PERIOD_SIZE: [512 65536]
|
|
PERIOD_BYTES: [4096 131072]
|
|
PERIODS: [4 128]
|
|
BUFFER_TIME: (10666 32768000]
|
|
BUFFER_SIZE: [2048 262144]
|
|
BUFFER_BYTES: [4096 524288]
|
|
TICK_TIME: ALL
|
|
|
|
Mixer controls:
|
|
|
|
numid=1,iface=MIXER,name='Output Port Switch'
|
|
; type=INTEGER,access=rw------,values=1,min=0,max=5,step=0
|
|
: values=4
|
|
*/
|
|
|
|
static int hw_init = 0;
|
|
|
|
static long int vol_l_hw = 255;
|
|
static long int vol_r_hw = 255;
|
|
static long int last_ps = -1;
|
|
|
|
static int muted = -1;
|
|
|
|
void audiohw_mute(int mute)
|
|
{
|
|
logf("mute %d", mute);
|
|
|
|
if (hw_init < 0 || muted == mute)
|
|
return;
|
|
|
|
muted = mute;
|
|
|
|
if(mute)
|
|
{
|
|
long int ps0 = 0;
|
|
alsa_controls_set_ints("Output Port Switch", 1, &ps0);
|
|
}
|
|
else
|
|
{
|
|
last_ps = 0;
|
|
erosq_get_outputs();
|
|
}
|
|
}
|
|
|
|
int erosq_get_outputs(void) {
|
|
long int ps = 0; // Muted, if nothing is plugged in!
|
|
|
|
int status = 0;
|
|
|
|
if (!hw_init) return ps;
|
|
|
|
const char * const sysfs_lo_switch = "/sys/class/switch/lineout/state";
|
|
const char * const sysfs_hs_switch = "/sys/class/switch/headset/state";
|
|
|
|
sysfs_get_int(sysfs_lo_switch, &status);
|
|
if (status) ps = 1; // lineout
|
|
|
|
sysfs_get_int(sysfs_hs_switch, &status);
|
|
if (status) ps = 2; // headset
|
|
|
|
erosq_set_output(ps);
|
|
|
|
return ps;
|
|
}
|
|
|
|
void erosq_set_output(int ps)
|
|
{
|
|
if (!hw_init || muted) return;
|
|
|
|
if (last_ps != ps)
|
|
{
|
|
logf("set out %d/%d", ps, last_ps);
|
|
/* Output port switch */
|
|
last_ps = ps;
|
|
alsa_controls_set_ints("Output Port Switch", 1, &last_ps);
|
|
audiohw_set_volume(vol_l_hw, vol_r_hw);
|
|
}
|
|
}
|
|
|
|
void audiohw_preinit(void)
|
|
{
|
|
logf("hw preinit");
|
|
alsa_controls_init("default");
|
|
hw_init = 1;
|
|
audiohw_mute(false); /* No need to stay muted */
|
|
}
|
|
|
|
void audiohw_postinit(void)
|
|
{
|
|
logf("hw postinit");
|
|
}
|
|
|
|
void audiohw_close(void)
|
|
{
|
|
logf("hw close");
|
|
hw_init = 0;
|
|
muted = -1;
|
|
alsa_controls_close();
|
|
}
|
|
|
|
void audiohw_set_frequency(int fsel)
|
|
{
|
|
(void)fsel;
|
|
}
|
|
|
|
/* min/max for pcm volume */
|
|
const int min_pcm = -740;
|
|
const int max_pcm = 0;
|
|
|
|
void audiohw_set_volume(int vol_l, int vol_r)
|
|
{
|
|
logf("hw vol %d %d", vol_l, vol_r);
|
|
|
|
long l,r;
|
|
|
|
vol_l_hw = vol_l;
|
|
vol_r_hw = vol_r;
|
|
|
|
if (lineout_inserted()) {
|
|
/* On the EROS Q/K hardware, full scale line out is _very_ hot
|
|
at ~5.8Vpp. As the hardware provides no way to reduce
|
|
output gain, we have to back off on the PCM signal
|
|
to avoid blowing out the signal.
|
|
*/
|
|
l = r = global_settings.volume_limit * 10;
|
|
} else {
|
|
l = vol_l_hw;
|
|
r = vol_r_hw;
|
|
}
|
|
|
|
int sw_volume_l = l <= min_pcm ? min_pcm : MIN(l, max_pcm);
|
|
int sw_volume_r = r <= min_pcm ? min_pcm : MIN(r, max_pcm);
|
|
pcm_set_mixer_volume(sw_volume_l / 20, sw_volume_r / 20);
|
|
}
|
|
|
|
void audiohw_set_lineout_volume(int vol_l, int vol_r)
|
|
{
|
|
long l,r;
|
|
|
|
logf("lo vol %d %d", vol_l, vol_r);
|
|
|
|
(void)vol_l;
|
|
(void)vol_r;
|
|
|
|
if (lineout_inserted()) {
|
|
l = r = global_settings.volume_limit * 10;
|
|
} else {
|
|
l = vol_l_hw;
|
|
r = vol_r_hw;
|
|
}
|
|
|
|
int sw_volume_l = l <= min_pcm ? min_pcm : MIN(l, max_pcm);
|
|
int sw_volume_r = r <= min_pcm ? min_pcm : MIN(r, max_pcm);
|
|
pcm_set_mixer_volume(sw_volume_l / 20, sw_volume_r / 20);
|
|
}
|