rockbox

History

Michael Sevakis 4ab52c3456 Shorten the uncontended (expected) corelock_(try_)lock return path. Squeeze down corelock_try_lock by a couple instructions. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16983 a1c6a512-1295-4272-9138-f99709370657		2008-04-06 08:48:31 +00:00
..
common	Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed.	2008-03-25 02:34:12 +00:00
decompressor
drivers	Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).	2008-04-06 04:34:57 +00:00
export	Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).	2008-04-06 04:34:57 +00:00
include
target	e200: Get the UNCACHED_ADDR macro and phys_fb_address use out of the lcd driver.	2008-04-06 05:08:39 +00:00
test	Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).	2008-03-26 01:50:41 +00:00
usbstack	Clean up the way empty transfers are sent in error cases.	2008-04-01 20:36:51 +00:00
arabjoin.c
arabjoin.h
ata_idle_notify.c	It makes more sense for the callback registrar to decide if its a "oneshot" then the callback caller.	2008-03-17 05:22:53 +00:00
backlight.c	Allow to select the core for running the user timer on portalplayer targets. * Incompatible plugin API change -> sorted API.	2008-04-04 19:38:46 +00:00
bidi.c
buffer.c
COPYING
debug.c
eeprom_settings.c
enc_base.c
events.c	It makes more sense for the callback registrar to decide if its a "oneshot" then the callback caller.	2008-03-17 05:22:53 +00:00
font.c
font_cache.c
general.c
hangul.c
hotswap.c
id3.c	Revert... stupid svn doesn't complain when passing -m twice :(	2008-04-02 22:45:23 +00:00
ifp_usb_serial.c
kernel.c	Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).	2008-04-06 04:34:57 +00:00
logf.c
lru.c
Makefile
mp3_playback.c	Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).	2008-03-26 01:50:41 +00:00
mp3data.c
mpeg.c	Revert my earlier const madness, we'll keep the parameter lists simple.	2008-03-28 12:51:33 +00:00
panic.c	iAudio M3: ADC driver, making buttons and battery voltage reading work. * Disable the multi-colour LED for now to save power. Proper handling will be added later. * Make reboot on button press work on iAudio X5, M5, M3 in panicf(), and on M3 in UIE().	2008-03-17 00:19:23 +00:00
pcm.c	Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).	2008-04-06 04:34:57 +00:00
pcm_record.c	Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).	2008-04-06 04:34:57 +00:00
pcm_sampr.c
powermgmt.c
profile.c
README
replaygain.c
rolo.c	Major cleanup of checkwps - fix all warnings and add a script to build versions for all supported targets (plus some unsupported ones). You now need to run the version of checkwps that matches the device your WPS is for.	2008-03-26 23:35:34 +00:00
rom.lds
scroll_engine.c
sound.c	Introduce sanity check and extra nop to stabilise TCC780x set_cpu_frequency(). Re-enable HAVE_ADJUSTABLE_CPU_FREQ and kill a few warnings by setting HAVE_SW_TONE_CONTROLS.	2008-03-31 22:43:20 +00:00
SOURCES	D2: Adjustable backlight brightness (sometimes fails when boosted, suggests I2C timing needs adjustment). Tweak lcd_enable() to behave more like other targets.	2008-04-04 20:55:58 +00:00
system.c	Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).	2008-04-06 04:34:57 +00:00
thread.c	Shorten the uncontended (expected) corelock_(try_)lock return path. Squeeze down corelock_try_lock by a couple instructions.	2008-04-06 08:48:31 +00:00
timer.c	Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).	2008-04-06 04:34:57 +00:00
tuner.c
usb.c	Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).	2008-03-26 01:50:41 +00:00

README

See docs/README