rockbox/firmware/target
Michael Sevakis dcf442e61f YUV Dither: r12 saving was removed but stacked parameter load offset wasn't changed to compensate, resulting in an improperly aligned dither kernel.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26064 a1c6a512-1295-4272-9138-f99709370657
2010-05-15 20:25:56 +00:00
..
arm YUV Dither: r12 saving was removed but stacked parameter load offset wasn't changed to compensate, resulting in an improperly aligned dither kernel. 2010-05-15 20:25:56 +00:00
coldfire PCM bottom layer simplification. pcm_rec_peak_addr variable no longer has to be handled there. Driver can just return current pointer for recording peaks. A new define, HAVE_PCM_REC_DMA_ADDRESS, specifies that physical addresses are being used for recording and translation is needed before starting a new block. The drivers need not worry about aligning start and size nor should care if either will be zero. All this will be checked in the logical layer first. 2010-05-12 14:05:36 +00:00
mips Hopefully finish off the red from r26051. 2010-05-15 14:16:35 +00:00
sh Fix the remaining reds. 2010-05-06 22:33:57 +00:00