Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/drivers/audio/wm8751.c
Marcin Bukat dce799641d WM8750/51: properly apply recording gain 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29594 a1c6a512-1295-4272-9138-f99709370657
2011-03-15 22:35:12 +00:00

678 lines
20 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Driver for WM8751 audio codec
*
* Based on code from the ipodlinux project - http://ipodlinux.org/
* Adapted for Rockbox in December 2005
*
* Original file: linux/arch/armnommu/mach-ipod/audio.c
*
* Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "kernel.h"
#include "wmcodec.h"
#include "audio.h"
#include "audiohw.h"
#include "system.h"
const struct sound_settings_info audiohw_settings[] = {
[SOUND_VOLUME] = {"dB", 0, 1, -74, 6, -25},
[SOUND_BASS] = {"dB", 1, 15, -60, 90, 0},
[SOUND_TREBLE] = {"dB", 1, 15, -60, 90, 0},
[SOUND_BALANCE] = {"%", 0, 1,-100, 100, 0},
[SOUND_CHANNELS] = {"", 0, 1, 0, 5, 0},
[SOUND_STEREO_WIDTH] = {"%", 0, 5, 0, 250, 100},
#ifdef HAVE_RECORDING
/* -17.25dB to 30.0dB in 0.75dB increments 64 steps*/
[SOUND_LEFT_GAIN] = {"dB", 2, 75, -1725, 3000, 0},
[SOUND_RIGHT_GAIN] = {"dB", 2, 75, -1725, 3000, 0},
[SOUND_MIC_GAIN] = {"dB", 2, 75, -1725, 3000, 3000},
#endif
#ifdef AUDIOHW_HAVE_BASS_CUTOFF
[SOUND_BASS_CUTOFF] = {"Hz", 0, 70, 130, 200, 200},
#endif
#ifdef AUDIOHW_HAVE_TREBLE_CUTOFF
[SOUND_TREBLE_CUTOFF] = {"kHz", 0, 4, 4, 8, 4},
#endif
#ifdef AUDIOHW_HAVE_DEPTH_3D
[SOUND_DEPTH_3D] = {"%", 0, 1, 0, 15, 0},
#endif
};
static uint16_t wmcodec_regs[WM_NUM_REGS] =
{
[0 ... WM_NUM_REGS-1] = 0x200, /* set invalid data in gaps */
#ifdef HAVE_WM8750
[LINVOL] = 0x097,
[RINVOL] = 0x097,
#endif
[LOUT1] = 0x079,
[ROUT1] = 0x079,
[DACCTRL] = 0x008,
[AINTFCE] = 0x00a,
[CLOCKING] = 0x000,
[LEFTGAIN] = 0x0ff,
[RIGHTGAIN] = 0x0ff,
[BASSCTRL] = 0x00f,
[TREBCTRL] = 0x00f,
/* [RESET] */
#ifdef HAVE_WM8750
[ENHANCE_3D] = 0x000,
[ALC1] = 0x07b,
[ALC2] = 0x000,
[ALC3] = 0x032,
[NGAT] = 0x000,
[LADCVOL] = 0x0c3,
[RADCVOL] = 0x0c3,
#endif
[ADDITIONAL1] = 0x0c0,
[ADDITIONAL2] = 0x000,
[PWRMGMT1] = 0x000,
[PWRMGMT2] = 0x000,
[ADDITIONAL3] = 0x000,
#ifdef HAVE_WM8750
[ADCIM] = 0x000,
[ADCL] = 0x000,
[ADCR] = 0x000,
#endif
[LEFTMIX1] = 0x050,
[LEFTMIX2] = 0x050,
[RIGHTMIX1] = 0x050,
[RIGHTMIX2] = 0x050,
[MONOMIX1] = 0x050,
[MONOMIX2] = 0x050,
[LOUT2] = 0x079,
[ROUT2] = 0x079,
[MONOOUT] = 0x079
};
/* global prescaler vars */
static int prescalertone = 0;
static int prescaler3d = 0;
static void wmcodec_set_reg(unsigned int reg, unsigned int val)
{
if (reg >= WM_NUM_REGS || (wmcodec_regs[reg] & 0x200))
/* invalid register */
return;
wmcodec_regs[reg] = val & 0x1ff;
wmcodec_write(reg, wmcodec_regs[reg]);
}
static void wmcodec_set_bits(unsigned int reg, unsigned int bits)
{
wmcodec_set_reg(reg, wmcodec_regs[reg] | bits);
}
static void wmcodec_clear_bits(unsigned int reg, unsigned int bits)
{
wmcodec_set_reg(reg, wmcodec_regs[reg] & ~bits);
}
static void wmcodec_set_masked(unsigned int reg, unsigned int val,
unsigned int mask )
{
wmcodec_set_reg(reg, (wmcodec_regs[reg] & ~mask) | val);
}
/* convert tenth of dB volume (-730..60) to master volume register value */
int tenthdb2master(int db)
{
/* +6 to -73dB 1dB steps (plus mute == 80levels) 7bits */
/* 1111111 == +6dB (0x7f) */
/* 1111001 == 0dB (0x79) */
/* 0110000 == -73dB (0x30) */
/* 0101111..0000000 == mute (<= 0x2f) */
if (db < VOLUME_MIN)
return 0x0;
else
return (db / 10) + 73 + 0x30;
}
static int tone_tenthdb2hw(int value)
{
/* -6.0db..+0db..+9.0db step 1.5db - translate -60..+0..+90 step 15
to 10..6..0 step -1.
*/
value = 10 - (value + 60) / 15;
if (value == 6)
value = 0xf; /* 0db -> off */
return value;
}
#ifdef AUDIOHW_HAVE_BASS_CUTOFF
void audiohw_set_bass_cutoff(int val)
{
if ( val == 130 )
wmcodec_clear_bits(BASSCTRL, BASSCTRL_BC);
else
wmcodec_set_bits(BASSCTRL, BASSCTRL_BC);
}
#endif
#ifdef AUDIOHW_HAVE_TREBLE_CUTOFF
void audiohw_set_treble_cutoff(int val)
{
if ( val == 8 )
wmcodec_clear_bits(TREBCTRL, TREBCTRL_TC);
else
wmcodec_set_bits(TREBCTRL, TREBCTRL_TC);
}
#endif
#ifdef HAVE_RECORDING
static int recvol2hw(int value)
{
/* -1725 to 3000 => 0 ... 23 ... 63 */
return ((4 * value) / 300) + 23;
}
#endif
int sound_val2phys(int setting, int value)
{
int result;
switch (setting)
{
#ifdef AUDIOHW_HAVE_DEPTH_3D
case SOUND_DEPTH_3D:
result = (100 * value + 8) / 15;
break;
#endif
default:
result = value;
}
return result;
}
static void audiohw_mute(bool mute)
{
/* Mute: Set DACMU = 1 to soft-mute the audio DACs. */
/* Unmute: Set DACMU = 0 to soft-un-mute the audio DACs. */
if (mute)
wmcodec_set_bits(DACCTRL, DACCTRL_DACMU);
else
wmcodec_clear_bits(DACCTRL, DACCTRL_DACMU);
}
/* Reset and power up the WM8751 */
void audiohw_preinit(void)
{
#ifdef MROBE_100
/* controls headphone ouput */
GPIOL_ENABLE |= 0x10;
GPIOL_OUTPUT_EN |= 0x10;
GPIOL_OUTPUT_VAL |= 0x10; /* disable */
#endif
#ifdef MPIO_HD200
/* control headphone output
* disabled on startup
*/
and_l(~(1<<25),&GPIO1_OUT);
or_l((1<<25), &GPIO1_ENABLE);
or_l((1<<25), &GPIO1_FUNCTION);
#endif
/*
* 1. Switch on power supplies.
* By default the WM8751 is in Standby Mode, the DAC is
* digitally muted and the Audio Interface, Line outputs
* and Headphone outputs are all OFF (DACMU = 1 Power
* Management registers 1 and 2 are all zeros).
*/
wmcodec_write(RESET, RESET_RESET); /*Reset*/
/* 2. Enable Vmid and VREF. */
wmcodec_set_bits(PWRMGMT1, PWRMGMT1_VREF | PWRMGMT1_VMIDSEL_5K);
#ifdef CODEC_SLAVE
wmcodec_set_bits(AINTFCE,AINTFCE_WL_16 | AINTFCE_FORMAT_I2S);
#else
/* BCLKINV=0(Dont invert BCLK) MS=1(Enable Master) LRSWAP=0 LRP=0 */
/* IWL=00(16 bit) FORMAT=10(I2S format) */
wmcodec_set_bits(AINTFCE, AINTFCE_MS | AINTFCE_WL_16 |
AINTFCE_FORMAT_I2S);
#endif
/* Set default samplerate */
audiohw_set_frequency(HW_FREQ_DEFAULT);
}
/* Enable DACs and audio output after a short delay */
void audiohw_postinit(void)
{
/* From app notes: allow Vref to stabilize to reduce clicks */
sleep(HZ);
#ifdef AUDIOHW_HAVE_DEPTH_3D
wmcodec_set_bits(ENHANCE_3D, ENHANCE_3D_MODE3D_PLAYBACK);
#endif
/* 3. Enable DACs as required. */
wmcodec_set_bits(PWRMGMT2, PWRMGMT2_DACL | PWRMGMT2_DACR);
/* 4. Enable line and / or headphone output buffers as required. */
#if defined(GIGABEATFX)
/* headphones + line-out */
wmcodec_set_bits(PWRMGMT2, PWRMGMT2_LOUT1 | PWRMGMT2_ROUT1 |
PWRMGMT2_LOUT2 | PWRMGMT2_ROUT2);
#else
/* headphones */
wmcodec_set_bits(PWRMGMT2, PWRMGMT2_LOUT1 | PWRMGMT2_ROUT1);
#endif
/* Full -0dB on the DACS */
wmcodec_set_bits(LEFTGAIN, 0xff);
wmcodec_set_bits(RIGHTGAIN, RIGHTGAIN_RDVU | 0xff);
/* Enable Thermal shutdown, Timeout when zero-crossing in use,
* set analog bias for 3.3V, monomix to DACR
*/
wmcodec_set_reg(ADDITIONAL1, ADDITIONAL1_TSDEN | ADDITIONAL1_TOEN |
ADDITIONAL1_DMONOMIX_LLRR | ADDITIONAL1_VSEL_DEFAULT);
/* Enable zero-crossing in out stage */
wmcodec_set_bits(LOUT1, LOUT1_LO1ZC);
wmcodec_set_bits(ROUT1, ROUT1_RO1ZC);
wmcodec_set_bits(LOUT2, LOUT2_LO2ZC);
wmcodec_set_bits(ROUT2, ROUT2_RO2ZC);
/* route signal from DAC to mixers */
wmcodec_set_bits(LEFTMIX1, LEFTMIX1_LD2LO);
wmcodec_set_bits(RIGHTMIX2, RIGHTMIX2_RD2RO);
#ifdef TOSHIBA_GIGABEAT_F
#ifdef HAVE_HARDWARE_BEEP
/* Single-ended mono input */
wmcodec_set_reg(MONOMIX1, 0x00);
/* Route mono input to both outputs at 0dB */
wmcodec_set_reg(LEFTMIX2, LEFTMIX2_MI2LO | LEFTMIX2_MI2LOVOL(2));
wmcodec_set_reg(RIGHTMIX1, RIGHTMIX1_MI2RO | RIGHTMIX1_MI2ROVOL(2));
#endif
#endif
/* lower power consumption */
wmcodec_set_masked(PWRMGMT1, PWRMGMT1_VMIDSEL_50K,
PWRMGMT1_VMIDSEL_MASK);
audiohw_mute(false);
#ifdef MROBE_100
/* enable headphone output */
GPIOL_OUTPUT_VAL &= ~0x10;
GPIOL_OUTPUT_EN |= 0x10;
#endif
#ifdef MPIO_HD200
/* enable headphone output */
or_l((1<<25),&GPIO1_OUT);
#endif
}
void audiohw_set_master_vol(int vol_l, int vol_r)
{
/* +6 to -73dB 1dB steps (plus mute == 80levels) 7bits */
/* 1111111 == +6dB */
/* 1111001 == 0dB */
/* 0110000 == -73dB */
/* 0101111 == mute (0x2f) */
wmcodec_set_masked(LOUT1, LOUT1_LOUT1VOL(vol_l),
LOUT1_LOUT1VOL_MASK);
wmcodec_set_masked(ROUT1, ROUT1_RO1VU | ROUT1_ROUT1VOL(vol_r),
ROUT1_ROUT1VOL_MASK);
}
#ifdef TOSHIBA_GIGABEAT_F
void audiohw_set_lineout_vol(int vol_l, int vol_r)
{
wmcodec_set_masked(LOUT2, LOUT2_LOUT2VOL(vol_l),
LOUT2_LOUT2VOL_MASK);
wmcodec_set_masked(ROUT2, ROUT2_RO2VU | ROUT2_ROUT2VOL(vol_r),
ROUT2_ROUT2VOL_MASK);
}
#endif
void audiohw_set_bass(int value)
{
wmcodec_set_masked(BASSCTRL,
BASSCTRL_BASS(tone_tenthdb2hw(value)),
BASSCTRL_BASS_MASK);
}
void audiohw_set_treble(int value)
{
wmcodec_set_masked(TREBCTRL, TREBCTRL_TREB(tone_tenthdb2hw(value)),
TREBCTRL_TREB_MASK);
}
static void sync_prescaler(void)
{
int prescaler;
prescaler = prescalertone + prescaler3d;
/* attenuate in 0.5dB steps (0dB - -127dB) */
wmcodec_set_reg(LEFTGAIN, 0xff - (prescaler & LEFTGAIN_LDACVOL));
wmcodec_set_reg(RIGHTGAIN, RIGHTGAIN_RDVU |
(0xff - (prescaler & RIGHTGAIN_RDACVOL)));
}
void audiohw_set_prescaler(int value)
{
prescalertone = 3 * value / 15; /* value in tdB */
sync_prescaler();
}
/* Nice shutdown of WM8751 codec */
void audiohw_close(void)
{
/* 1. Set DACMU = 1 to soft-mute the audio DACs. */
audiohw_mute(true);
#ifdef MPIO_HD200
/* disable headphone out */
and_l(~(1<<25), &GPIO1_OUT);
#endif
/* 2. Disable all output buffers. */
wmcodec_set_reg(PWRMGMT2, 0x0);
/* 3. Switch off the power supplies. */
wmcodec_set_reg(PWRMGMT1, 0x0);
}
/* According to datasheet of WM8750
* clocking setup is needed in both slave and master mode
*/
void audiohw_set_frequency(int fsel)
{
(void)fsel;
static const unsigned char srctrl_table[HW_NUM_FREQ] =
{
HW_HAVE_11_([HW_FREQ_11] = CODEC_SRCTRL_11025HZ,)
HW_HAVE_22_([HW_FREQ_22] = CODEC_SRCTRL_22050HZ,)
HW_HAVE_44_([HW_FREQ_44] = CODEC_SRCTRL_44100HZ,)
HW_HAVE_88_([HW_FREQ_88] = CODEC_SRCTRL_88200HZ,)
};
if ((unsigned)fsel >= HW_NUM_FREQ)
fsel = HW_FREQ_DEFAULT;
wmcodec_set_reg(CLOCKING, srctrl_table[fsel]);
}
#ifdef HAVE_WM8750
#ifdef AUDIOHW_HAVE_DEPTH_3D
/* Set the depth of the 3D effect */
void audiohw_set_depth_3d(int val)
{
if (val > 0)
{
wmcodec_set_bits(ENHANCE_3D, ENHANCE_3D_3DEN);
wmcodec_set_masked(ENHANCE_3D, ENHANCE_3D_DEPTH(val),
ENHANCE_3D_DEPTH_MASK);
}
else
{
wmcodec_clear_bits(ENHANCE_3D, ENHANCE_3D_3DEN);
}
/* -4 dB @ full setting
* this gives approximately constant volume on setting change
* and prevents clipping (at least on my HD300)
*/
prescaler3d = 8*val / 15;
sync_prescaler();
}
#endif
#ifdef HAVE_RECORDING
#if 0
static void audiohw_set_ngat(int ngath, int type, bool enable)
{
/* This function controls Noise gate function
* of the codec. This can only run in conjunction
* with ALC
*/
if(enable)
wmcodec_set_reg(NGAT, NGAT_NGG(type) |
NGAT_NGTH(ngath) | NGAT_NGAT);
else
wmcodec_clear_bits(NGAT, NGAT_NGAT);
}
static void audiohw_set_alc(unsigned char level, /* signal level at ADC */
bool zc, /* zero cross detection */
unsigned char hold, /* hold time */
unsigned char decay, /* decay time */
unsigned char attack, /* attack time */
bool enable) /* hw function on/off */
{
if(enable)
{
wmcodec_set_reg(ALC1, ALC1_ALCSEL_STEREO | ALC1_MAXGAIN(0x07) |
ALC1_ALCL(level));
wmcodec_set_reg(ALC2, zc?ALC2_ALCZC:0 | ALC2_HLD(hold));
wmcodec_set_reg(ALC3, ALC3_DCY(decay) | ALC3_ATK(attack));
}
else
{
wmcodec_set_masked(ALC1, ALC1_ALCSEL_DISABLED, ALC1_ALCSEL_MASK);
}
}
#endif
void audiohw_set_recsrc(int source, bool recording)
{
/* INPUT1 - FM radio
* INPUT2 - Line-in
* INPUT3 - MIC
*
* if recording == false we use analog bypass from input
* turn off ADC, PGA to save power
* turn on output buffer(s)
*
* if recording == true we route input signal to PGA
* and monitoring picks up signal after PGA and ADC
* turn on ADC, PGA, DAC, output buffer(s)
*/
switch(source)
{
case AUDIO_SRC_PLAYBACK:
audiohw_mute(true);
/* mute PGA, disable all audio paths but DAC and output stage*/
wmcodec_set_bits(LINVOL, LINVOL_LINMUTE); /* Mute */
wmcodec_set_bits(RINVOL, RINVOL_RINMUTE); /* Mute */
wmcodec_clear_bits(PWRMGMT2, PWRMGMT2_OUT3 | PWRMGMT2_MOUT |
PWRMGMT2_ROUT2 | PWRMGMT2_LOUT2);
/* route DAC signal to output mixer, disable INPUT routing */
wmcodec_clear_bits(LEFTMIX1, LEFTMIX1_LI2LO);
wmcodec_set_bits(LEFTMIX1, LEFTMIX1_LD2LO);
wmcodec_clear_bits(RIGHTMIX2, RIGHTMIX2_RI2RO);
wmcodec_set_bits(RIGHTMIX2, RIGHTMIX2_RD2RO);
/* unmute DAC */
audiohw_mute(false);
break;
case AUDIO_SRC_FMRADIO:
if(recording)
{
audiohw_mute(true);
/* Turn on PGA and ADC */
wmcodec_set_bits(PWRMGMT1, PWRMGMT1_AINL | PWRMGMT1_AINR |
PWRMGMT1_ADCL | PWRMGMT1_ADCR);
/* Setup input source for PGA as INPUT1 */
wmcodec_set_masked(ADCL, ADCL_LINSEL_LINPUT1, ADCL_LINSEL_MASK);
wmcodec_set_masked(ADCR, ADCR_RINSEL_RINPUT1, ADCR_RINSEL_MASK);
/* turn off ALC and NGAT as OF do */
/*
audiohw_set_alc(0x00, false, 0x00, 0x00, 0x00, false);
audiohw_set_ngat(0x00, 0x00, false);
*/
/* setup output digital data
* default is LADC -> LDATA, RADC -> RDATA
* so we don't touch this
*/
/* skip: power up DAC and output stage as its never powered down
wmcodec_set_bits(PWRMGMT2, PWRMGMT2_DACL | PWRMGMT2_DACR |
PWRMGMT2_LOUT1 | PWRMGMT2_ROUT1);
*/
/* route DAC signal to output mixer, disable INPUT routing */
wmcodec_clear_bits(LEFTMIX1, LEFTMIX1_LI2LO);
wmcodec_set_bits(LEFTMIX1, LEFTMIX1_LD2LO);
wmcodec_clear_bits(RIGHTMIX2, RIGHTMIX2_RI2RO);
wmcodec_set_bits(RIGHTMIX2, RIGHTMIX2_RD2RO);
audiohw_mute(false);
}
else
{
audiohw_mute(true);
/* turn off ADC, PGA */
wmcodec_clear_bits(PWRMGMT1, PWRMGMT1_AINL | PWRMGMT1_AINR |
PWRMGMT1_ADCL | PWRMGMT1_ADCR);
/* setup monitor mode by routing input signal to outmix
* at 0dB volume
*/
wmcodec_set_masked(LEFTMIX1, LEFTMIX1_LI2LOVOL(0x20),
LEFTMIX1_LI2LOVOL_MASK);
wmcodec_set_bits(LEFTMIX1, LEFTMIX1_LI2LO |
LEFTMIX1_LMIXSEL_LINPUT1 |
LEFTMIX1_LD2LO);
wmcodec_set_masked(RIGHTMIX2, RIGHTMIX2_RI2ROVOL(0x20),
RIGHTMIX2_RI2ROVOL_MASK);
wmcodec_set_bits(RIGHTMIX1, RIGHTMIX1_RMIXSEL_RINPUT1);
wmcodec_set_bits(RIGHTMIX2, RIGHTMIX2_RI2RO |
RIGHTMIX2_RD2RO);
audiohw_mute(false);
}
break;
#if (INPUT_SRC_CAPS & SRC_CAP_LINEIN)
case AUDIO_SRC_LINEIN:
audiohw_mute(true);
/* Turn on PGA, ADC */
wmcodec_set_bits(PWRMGMT1, PWRMGMT1_AINL | PWRMGMT1_AINR |
PWRMGMT1_ADCL | PWRMGMT1_ADCR);
/* Setup input source for PGA as INPUT2
* MICBOOST disabled
*/
wmcodec_set_masked(ADCL, ADCL_LINSEL_LINPUT2, ADCL_LINSEL_MASK);
wmcodec_set_masked(ADCR, ADCR_RINSEL_RINPUT2, ADCR_RINSEL_MASK);
/* setup ALC and NGAT as OF do */
/* level, zc, hold, decay, attack, enable */
/* audiohw_set_alc(0x0b, true, 0x00, 0x03, 0x02, true); */
/* ngath, type, enable */
/* audiohw_set_ngat(0x08, 0x02, true); */
/* setup output digital data
* default is LADC -> LDATA, RADC -> RDATA
* so we don't touch this
*/
/* route DAC signal to output mixer, disable INPUT routing */
wmcodec_clear_bits(LEFTMIX1, LEFTMIX1_LI2LO);
wmcodec_set_bits(LEFTMIX1, LEFTMIX1_LD2LO);
wmcodec_clear_bits(RIGHTMIX2, RIGHTMIX2_RI2RO);
wmcodec_set_bits(RIGHTMIX2, RIGHTMIX2_RD2RO);
#if !defined(MPIO_HD300)
/* HD300 uses the same socket for headphones and line-in */
audiohw_mute(false);
#endif
break;
#endif
#if (INPUT_SRC_CAPS & SRC_CAP_MIC)
case AUDIO_SRC_MIC:
audiohw_mute(true);
/* Turn on PGA and ADC */
wmcodec_set_bits(PWRMGMT1, PWRMGMT1_AINL | PWRMGMT1_AINR |
PWRMGMT1_ADCL | PWRMGMT1_ADCR);
/* Setup input source for PGA as INPUT3
* MICBOOST disabled
*/
wmcodec_set_masked(ADCL, ADCL_LINSEL_LINPUT3, ADCL_LINSEL_MASK);
wmcodec_set_masked(ADCR, ADCR_RINSEL_RINPUT3, ADCR_RINSEL_MASK);
/* setup ALC and NGAT as OF do */
/* level, zc, hold, decay, attack, enable */
/* audiohw_set_alc(0x0f, false, 0x00, 0x05, 0x02, true); */
/* ngath, type, enable */
/* audiohw_set_ngat(0x1f, 0x00, true); */
/* setup output digital data
* default is LADC -> LDATA, RADC -> RDATA
* so we don't touch this
*/
/* route DAC signal to output mixer, disable INPUT routing */
wmcodec_clear_bits(LEFTMIX1, LEFTMIX1_LI2LO);
wmcodec_set_bits(LEFTMIX1, LEFTMIX1_LD2LO);
wmcodec_clear_bits(RIGHTMIX2, RIGHTMIX2_RI2RO);
wmcodec_set_bits(RIGHTMIX2, RIGHTMIX2_RD2RO);
audiohw_mute(false);
break;
#endif
} /* switch(source) */
}
/* Setup PGA gain */
void audiohw_set_recvol(int vol_l, int vol_r, int type)
{
wmcodec_set_reg(LINVOL, LINVOL_LIZC | LINVOL_LINVOL(recvol2hw(vol_l)));
if (type == AUDIO_GAIN_MIC)
wmcodec_set_reg(RINVOL, RINVOL_RIVU | RINVOL_RIZC |
RINVOL_RINVOL(recvol2hw(vol_l)));
else
wmcodec_set_reg(RINVOL, RINVOL_RIVU | RINVOL_RIZC |
RINVOL_RINVOL(recvol2hw(vol_r)));
}
#endif /* HAVE_RECORDING */
#endif /* HAVE_WM8750 */
Reference in a new issue View git blame Copy permalink