6c97145e7d
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31396 a1c6a512-1295-4272-9138-f99709370657
155 lines
4.1 KiB
C
155 lines
4.1 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Gigabeat specific code for the Wolfson codec
|
|
*
|
|
* Based on code from the ipodlinux project - http://ipodlinux.org/
|
|
* Adapted for Rockbox in December 2005
|
|
*
|
|
* Original file: linux/arch/armnommu/mach-ipod/audio.c
|
|
*
|
|
* Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "cpu.h"
|
|
#include "kernel.h"
|
|
#include "sound.h"
|
|
#include "i2c-s3c2440.h"
|
|
#include "system-target.h"
|
|
#include "timer.h"
|
|
#include "wmcodec.h"
|
|
|
|
#ifdef HAVE_HARDWARE_BEEP
|
|
#include "misc.h"
|
|
static void beep_stop(void);
|
|
#endif
|
|
|
|
void audiohw_init(void)
|
|
{
|
|
/* GPC5 controls headphone output */
|
|
GPCCON &= ~(0x3 << 10);
|
|
GPCCON |= (1 << 10);
|
|
GPCDAT |= (1 << 5);
|
|
|
|
audiohw_preinit();
|
|
|
|
#ifdef HAVE_HARDWARE_BEEP
|
|
/* pin pullup ON */
|
|
GPBUP &= ~(1 << 3);
|
|
beep_stop();
|
|
/* set pin to TIMER3 output (functional TOUT3) */
|
|
GPBCON = (GPBCON & ~(0x3 << 6)) | (2 << 6);
|
|
#endif
|
|
}
|
|
|
|
void wmcodec_write(int reg, int data)
|
|
{
|
|
unsigned char d[2];
|
|
d[0] = (reg << 1) | ((data & 0x100) >> 8);
|
|
d[1] = data;
|
|
i2c_write(0x34, d, 2);
|
|
}
|
|
|
|
#ifdef HAVE_HARDWARE_BEEP
|
|
/** Beeping via TIMER3 output to codec MONO input **/
|
|
static int beep_cycles = 0;
|
|
static int beep_cycle_count = 0;
|
|
|
|
static void beep_stop(void)
|
|
{
|
|
int oldstatus = disable_interrupt_save(IRQ_FIQ_STATUS);
|
|
|
|
/* stop interrupt */
|
|
INTMSK |= TIMER3_MASK;
|
|
/* stop timer */
|
|
TCON &= ~(1 << 16);
|
|
/* be sure timer PWM pin is LOW to avoid noise */
|
|
TCON ^= (GPBDAT & (1 << 3)) << 15;
|
|
/* clear pending */
|
|
SRCPND = TIMER3_MASK;
|
|
INTPND = TIMER3_MASK;
|
|
|
|
restore_interrupt(oldstatus);
|
|
}
|
|
|
|
/* Timer interrupt called on every cycle */
|
|
void TIMER3(void)
|
|
{
|
|
if (++beep_cycles >= beep_cycle_count)
|
|
{
|
|
/* beep is complete */
|
|
beep_stop();
|
|
}
|
|
|
|
/* clear pending */
|
|
SRCPND = TIMER3_MASK;
|
|
INTPND = TIMER3_MASK;
|
|
}
|
|
|
|
void beep_play(unsigned int frequency, unsigned int duration,
|
|
unsigned int amplitude)
|
|
{
|
|
#define TIMER3_TICK_SEC (TIMER_FREQ / TIMER234_PRESCALE)
|
|
|
|
unsigned long tcnt, tcmp;
|
|
int oldstatus;
|
|
|
|
if (frequency == 0 || duration == 0 || amplitude == 0)
|
|
{
|
|
beep_stop(); /* won't hear it anyway */
|
|
return;
|
|
}
|
|
|
|
/* pretend this is pcm */
|
|
if (amplitude > 32767)
|
|
amplitude = 32767;
|
|
|
|
/* limit frequency range to keep math in range */
|
|
if (frequency > 19506)
|
|
frequency = 19506;
|
|
else if (frequency < 18)
|
|
frequency = 18;
|
|
|
|
/* set timer */
|
|
tcnt = TIMER3_TICK_SEC / frequency;
|
|
|
|
oldstatus = disable_interrupt_save(IRQ_FIQ_STATUS);
|
|
|
|
beep_cycles = 0;
|
|
beep_cycle_count = TIMER3_TICK_SEC * duration / (tcnt*1000);
|
|
|
|
/* divider = 1/2 */
|
|
TCFG1 = (TCFG1 & ~(0xf << 12)) | (0 << 12);
|
|
/* stop TIMER3, inverter OFF */
|
|
TCON &= ~((1 << 18) | (1 << 16));
|
|
/* set countdown */
|
|
TCNTB3 = tcnt;
|
|
/* set PWM counter - control volume with duty cycle. */
|
|
tcmp = tcnt*amplitude / (65536*2 - 2*amplitude);
|
|
TCMPB3 = tcmp < 1 ? 1 : tcmp;
|
|
/* manual update: on (to reset count), interval mode (auto reload) */
|
|
TCON |= (1 << 19) | (1 << 17);
|
|
/* clear manual bit */
|
|
TCON &= ~(1 << 17);
|
|
/* start timer */
|
|
TCON |= (1 << 16);
|
|
/* enable timer interrupt */
|
|
INTMSK &= ~TIMER3_MASK;
|
|
|
|
restore_interrupt(oldstatus);
|
|
}
|
|
#endif /* HAVE_HARDWARE_BEEP */
|