dbcd321813
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13128 a1c6a512-1295-4272-9138-f99709370657
373 lines
9.7 KiB
C
373 lines
9.7 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2005 by Dave Chapman
|
|
*
|
|
* Based on Rockbox iriver bootloader by Linus Nielsen Feltzing
|
|
* and the ipodlinux bootloader by Daniel Palffy and Bernard Leach
|
|
*
|
|
* All files in this archive are subject to the GNU General Public License.
|
|
* See the file COPYING in the source tree root for full license agreement.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "config.h"
|
|
|
|
#include <stdlib.h>
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
#include <stdarg.h>
|
|
#include "cpu.h"
|
|
#include "system.h"
|
|
#include "lcd.h"
|
|
#include "kernel.h"
|
|
#include "thread.h"
|
|
#include "ata.h"
|
|
#include "fat.h"
|
|
#include "disk.h"
|
|
#include "font.h"
|
|
#include "adc.h"
|
|
#include "backlight-target.h"
|
|
#include "panic.h"
|
|
#include "power.h"
|
|
#include "file.h"
|
|
#include "common.h"
|
|
|
|
#define XSC(X) #X
|
|
#define SC(X) XSC(X)
|
|
|
|
/* Maximum allowed firmware image size. The largest known current
|
|
(December 2006) firmware is about 7.5MB (Apple's firmware for the ipod video)
|
|
so we set this to 8MB. */
|
|
#define MAX_LOADSIZE (8*1024*1024)
|
|
|
|
/* A buffer to load the Linux kernel or Rockbox into */
|
|
unsigned char *loadbuffer = (unsigned char *)DRAM_START;
|
|
|
|
/* Bootloader version */
|
|
char version[] = APPSVERSION;
|
|
|
|
#define IPOD_HW_REVISION (*((volatile unsigned long*)(0x00002084)))
|
|
|
|
/* We copy the hardware revision to the last four bytes of SDRAM and then
|
|
re-read it after we have re-mapped SDRAM to 0x0 in Rockbox */
|
|
#define TMP_IPOD_HW_REVISION (*((volatile unsigned long*)(0x11fffffc)))
|
|
|
|
#define BUTTON_LEFT 1
|
|
#define BUTTON_MENU 2
|
|
#define BUTTON_RIGHT 3
|
|
#define BUTTON_PLAY 4
|
|
#define BUTTON_HOLD 5
|
|
|
|
#if CONFIG_KEYPAD == IPOD_4G_PAD && !defined(IPOD_MINI)
|
|
/* check if number of seconds has past */
|
|
int timer_check(int clock_start, unsigned int usecs)
|
|
{
|
|
if ((USEC_TIMER - clock_start) >= usecs) {
|
|
return 1;
|
|
} else {
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static void ser_opto_keypad_cfg(int val)
|
|
{
|
|
int start_time;
|
|
|
|
GPIOB_ENABLE &=~ 0x80;
|
|
|
|
outl(inl(0x7000c104) | 0xc000000, 0x7000c104);
|
|
outl(val, 0x7000c120);
|
|
outl(inl(0x7000c100) | 0x80000000, 0x7000c100);
|
|
|
|
GPIOB_OUTPUT_VAL &=~ 0x10;
|
|
GPIOB_OUTPUT_EN |= 0x10;
|
|
|
|
start_time = USEC_TIMER;
|
|
do {
|
|
if ((inl(0x7000c104) & 0x80000000) == 0) {
|
|
break;
|
|
}
|
|
} while (timer_check(start_time, 1500) != 0);
|
|
|
|
outl(inl(0x7000c100) & ~0x80000000, 0x7000c100);
|
|
|
|
GPIOB_ENABLE |= 0x80;
|
|
GPIOB_OUTPUT_VAL |= 0x10;
|
|
GPIOB_OUTPUT_EN &=~0x10;
|
|
|
|
outl(inl(0x7000c104) | 0xc000000, 0x7000c104);
|
|
outl(inl(0x7000c100) | 0x60000000, 0x7000c100);
|
|
}
|
|
|
|
int opto_keypad_read(void)
|
|
{
|
|
int loop_cnt, had_io = 0;
|
|
|
|
for (loop_cnt = 5; loop_cnt != 0;)
|
|
{
|
|
int key_pressed = 0;
|
|
int start_time;
|
|
unsigned int key_pad_val;
|
|
|
|
ser_opto_keypad_cfg(0x8000023a);
|
|
|
|
start_time = USEC_TIMER;
|
|
do {
|
|
if (inl(0x7000c104) & 0x4000000) {
|
|
had_io = 1;
|
|
break;
|
|
}
|
|
|
|
if (had_io != 0) {
|
|
break;
|
|
}
|
|
} while (timer_check(start_time, 1500) != 0);
|
|
|
|
key_pad_val = inl(0x7000c140);
|
|
if ((key_pad_val & ~0x7fff0000) != 0x8000023a) {
|
|
loop_cnt--;
|
|
} else {
|
|
key_pad_val = (key_pad_val << 11) >> 27;
|
|
key_pressed = 1;
|
|
}
|
|
|
|
outl(inl(0x7000c100) | 0x60000000, 0x7000c100);
|
|
outl(inl(0x7000c104) | 0xc000000, 0x7000c104);
|
|
|
|
if (key_pressed != 0) {
|
|
return key_pad_val ^ 0x1f;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int key_pressed(void)
|
|
{
|
|
unsigned char state;
|
|
|
|
#if CONFIG_KEYPAD == IPOD_4G_PAD
|
|
#ifdef IPOD_MINI /* mini 1G only */
|
|
state = GPIOA_INPUT_VAL & 0x3f;
|
|
if ((state & 0x10) == 0) return BUTTON_LEFT;
|
|
if ((state & 0x2) == 0) return BUTTON_MENU;
|
|
if ((state & 0x4) == 0) return BUTTON_PLAY;
|
|
if ((state & 0x8) == 0) return BUTTON_RIGHT;
|
|
#else
|
|
state = opto_keypad_read();
|
|
if ((state & 0x4) == 0) return BUTTON_LEFT;
|
|
if ((state & 0x10) == 0) return BUTTON_MENU;
|
|
if ((state & 0x8) == 0) return BUTTON_PLAY;
|
|
if ((state & 0x2) == 0) return BUTTON_RIGHT;
|
|
#endif
|
|
#elif CONFIG_KEYPAD == IPOD_3G_PAD
|
|
state = inb(0xcf000030);
|
|
if (((state & 0x20) == 0)) return BUTTON_HOLD; /* hold on */
|
|
if ((state & 0x08) == 0) return BUTTON_LEFT;
|
|
if ((state & 0x10) == 0) return BUTTON_MENU;
|
|
if ((state & 0x04) == 0) return BUTTON_PLAY;
|
|
if ((state & 0x01) == 0) return BUTTON_RIGHT;
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/* This function is the same on all ipods */
|
|
bool button_hold(void)
|
|
{
|
|
return (GPIOA_INPUT_VAL & 0x20)?false:true;
|
|
}
|
|
|
|
void fatal_error(void)
|
|
{
|
|
extern int line;
|
|
bool holdstatus=false;
|
|
|
|
/* System font is 6 pixels wide */
|
|
#if LCD_WIDTH >= (30*6)
|
|
printf("Press MENU+SELECT to reboot");
|
|
printf("then SELECT+PLAY for disk mode");
|
|
#else
|
|
printf("Press MENU+SELECT to");
|
|
printf("reboot then SELECT+PLAY");
|
|
printf("for disk mode");
|
|
#endif
|
|
|
|
while (1) {
|
|
if (button_hold() != holdstatus) {
|
|
if (button_hold()) {
|
|
holdstatus=true;
|
|
lcd_puts(0, line, "Hold switch on!");
|
|
} else {
|
|
holdstatus=false;
|
|
lcd_puts(0, line, " ");
|
|
}
|
|
lcd_update();
|
|
}
|
|
udelay(100000); /* 100ms */
|
|
}
|
|
|
|
}
|
|
|
|
|
|
void* main(void)
|
|
{
|
|
char buf[256];
|
|
int i;
|
|
int btn;
|
|
int rc;
|
|
bool haveretailos;
|
|
bool button_was_held;
|
|
struct partinfo* pinfo;
|
|
unsigned short* identify_info;
|
|
|
|
/* Check the button hold status as soon as possible - to
|
|
give the user maximum chance to turn it off in order to
|
|
reset the settings in rockbox. */
|
|
button_was_held = button_hold();
|
|
|
|
/* Turn on the backlight */
|
|
|
|
__backlight_on();
|
|
|
|
TMP_IPOD_HW_REVISION = IPOD_HW_REVISION;
|
|
ipod_hw_rev = IPOD_HW_REVISION;
|
|
|
|
system_init();
|
|
kernel_init();
|
|
lcd_init();
|
|
font_init();
|
|
|
|
#ifdef HAVE_LCD_COLOR
|
|
lcd_set_foreground(LCD_WHITE);
|
|
lcd_set_background(LCD_BLACK);
|
|
lcd_clear_display();
|
|
#endif
|
|
|
|
#if 0
|
|
/* ADC and button drivers are not yet implemented */
|
|
adc_init();
|
|
button_init();
|
|
#endif
|
|
|
|
btn=key_pressed();
|
|
|
|
/* Enable bootloader messages */
|
|
if (btn==BUTTON_RIGHT)
|
|
verbose = true;
|
|
|
|
lcd_setfont(FONT_SYSFIXED);
|
|
|
|
printf("Rockbox boot loader");
|
|
printf("Version: %s", version);
|
|
printf("IPOD version: 0x%08x", IPOD_HW_REVISION);
|
|
|
|
i=ata_init();
|
|
if (i==0) {
|
|
identify_info=ata_get_identify();
|
|
/* Show model */
|
|
for (i=0; i < 20; i++) {
|
|
((unsigned short*)buf)[i]=htobe16(identify_info[i+27]);
|
|
}
|
|
buf[40]=0;
|
|
for (i=39; i && buf[i]==' '; i--) {
|
|
buf[i]=0;
|
|
}
|
|
printf(buf);
|
|
} else {
|
|
printf("ATA: %d", i);
|
|
}
|
|
|
|
disk_init();
|
|
rc = disk_mount_all();
|
|
if (rc<=0)
|
|
{
|
|
printf("No partition found");
|
|
fatal_error();
|
|
}
|
|
|
|
pinfo = disk_partinfo(1);
|
|
printf("Partition 1: 0x%02x %ld MB",
|
|
pinfo->type, pinfo->size / 2048);
|
|
|
|
|
|
if (button_was_held || (btn==BUTTON_MENU)) {
|
|
/* If either the hold switch was on, or the Menu button was held, then
|
|
try the Apple firmware */
|
|
|
|
printf("Loading original firmware...");
|
|
|
|
/* First try an apple_os.ipod file on the FAT32 partition
|
|
(either in .rockbox or the root)
|
|
*/
|
|
|
|
rc=load_firmware(loadbuffer, "apple_os.ipod", MAX_LOADSIZE);
|
|
|
|
if (rc == EOK) {
|
|
printf("apple_os.ipod loaded.");
|
|
return (void*)DRAM_START;
|
|
} else if (rc == EFILE_NOT_FOUND) {
|
|
/* If apple_os.ipod doesn't exist, then check if there is an Apple
|
|
firmware image in RAM */
|
|
haveretailos = (memcmp((void*)(DRAM_START+0x20),"portalplayer",12)==0);
|
|
if (haveretailos) {
|
|
/* We have a copy of the retailos in RAM, lets just run it. */
|
|
return (void*)DRAM_START;
|
|
}
|
|
} else if (rc < EFILE_NOT_FOUND) {
|
|
printf("Error!");
|
|
printf("Can't load apple_os.ipod:");
|
|
printf(strerror(rc));
|
|
}
|
|
|
|
/* Everything failed - just loop forever */
|
|
printf("No RetailOS detected");
|
|
|
|
} else if (btn==BUTTON_PLAY) {
|
|
printf("Loading Linux...");
|
|
rc=load_raw_firmware(loadbuffer, "/linux.bin", MAX_LOADSIZE);
|
|
if (rc < EOK) {
|
|
printf("Error!");
|
|
printf("Can't load linux.bin:");
|
|
printf(strerror(rc));
|
|
} else {
|
|
return (void*)DRAM_START;
|
|
}
|
|
} else {
|
|
printf("Loading Rockbox...");
|
|
rc=load_firmware(loadbuffer, BOOTFILE, MAX_LOADSIZE);
|
|
if (rc < EOK) {
|
|
printf("Error!");
|
|
printf("Can't load rockbox.ipod:");
|
|
printf(strerror(rc));
|
|
} else {
|
|
printf("Rockbox loaded.");
|
|
return (void*)DRAM_START;
|
|
}
|
|
}
|
|
|
|
/* If we get to here, then we haven't been able to load any firmware */
|
|
fatal_error();
|
|
|
|
/* We never get here, but keep gcc happy */
|
|
return (void*)0;
|
|
}
|
|
|
|
/* These functions are present in the firmware library, but we reimplement
|
|
them here because the originals do a lot more than we want */
|
|
void usb_acknowledge(void)
|
|
{
|
|
}
|
|
|
|
void usb_wait_for_disconnect(void)
|
|
{
|
|
}
|