..
adc.h
move the iriver h1x0/h3x0 targets to the target tree
2006-10-30 08:56:06 +00:00
ata.h
* changes to ata.c - idle callbacks are called after 2 sec of real idle,
2006-11-08 01:55:26 +00:00
ata_idle_notify.h
fix booboo in ata.c (SYS_POWEROFF falling into SYS_USB_CONNECTED)
2006-11-08 02:23:01 +00:00
ata_mmc.h
Ondio: Fix multivolume and hotswap for the old MMC clock circuit.
2005-05-22 00:42:00 +00:00
audio.h
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
2006-11-06 18:07:30 +00:00
backlight.h
Added remote backlight on hold option to players with remote hold switch. Disabled IRQs while reading pcf50606 ADC. This seems to have stopped buttons becoming unresponsive when using remote. Maybe fixes other button glitches as well?
2006-09-10 02:00:40 +00:00
bidi.h
waiting is over: initial unicode commit
2005-12-06 13:27:15 +00:00
bitswap.h
Added header file for bitswap, and made the fliptable global for re-use
2004-09-26 09:25:59 +00:00
buffer.h
mp3buf renamed to audiobuf
2005-04-05 11:33:58 +00:00
button.h
woops, removed a bit too much
2006-10-30 09:30:21 +00:00
config-e200.h
Correct LCD pixel format on Sansa E200
2006-10-26 20:01:04 +00:00
config-fmrecorder.h
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
2006-10-25 10:17:57 +00:00
config-gigabeat.h
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
2006-10-25 10:17:57 +00:00
config-gmini120.h
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
2006-10-25 10:17:57 +00:00
config-gminisp.h
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
2006-10-25 10:17:57 +00:00
config-h10.h
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
2006-10-25 10:17:57 +00:00
config-h10_5gb.h
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
2006-10-25 10:17:57 +00:00
config-h100.h
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
2006-11-06 18:07:30 +00:00
config-h120.h
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
2006-11-06 18:07:30 +00:00
config-h300.h
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
2006-11-06 18:07:30 +00:00
config-iaudiox5.h
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
2006-11-06 18:07:30 +00:00
config-ifp7xx.h
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
2006-10-25 10:17:57 +00:00
config-ipod3g.h
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
2006-10-25 10:17:57 +00:00
config-ipod4g.h
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
2006-10-25 10:17:57 +00:00
config-ipodcolor.h
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
2006-10-25 10:17:57 +00:00
config-ipodmini.h
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
2006-10-25 10:17:57 +00:00
config-ipodmini2g.h
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
2006-10-25 10:17:57 +00:00
config-ipodnano.h
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
2006-10-25 10:17:57 +00:00
config-ipodvideo.h
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
2006-10-25 10:17:57 +00:00
config-ondiofm.h
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
2006-10-25 10:17:57 +00:00
config-ondiosp.h
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
2006-10-25 10:17:57 +00:00
config-player.h
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
2006-10-25 10:17:57 +00:00
config-recorder.h
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
2006-10-25 10:17:57 +00:00
config-recorderv2.h
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
2006-10-25 10:17:57 +00:00
config-tpj1022.h
Initial commit of work for port to the Tatung Elio TPJ-1022 - yet another PortalPlayer PP5020 target.
2006-08-31 19:19:35 +00:00
config.h
General: changed local adc to voltage conversions in several places to use battery_voltage. Added battery_read_info function for unfiltered battery information. x5: removed adc_read as a distinct function. Removed adc tick task. adc_init is empty inline. Adjusted battery scale, voltage to level array and read 10 bits from the ADC for battery since 255 levels is not enough for true centivolt resolution.
2006-10-30 11:33:38 +00:00
cpu.h
added mostly dummy changes to allow building of a Sansa e200 bootloader
2006-08-01 22:28:14 +00:00
debug.h
Added GDB API - a way to call stub procedures from a DEBUG build.
2006-02-04 00:04:02 +00:00
disk.h
preparations for hotswapping MMC
2005-01-28 21:32:16 +00:00
eeprom_24cxx.h
eeprom driver for the h3x0 series, cleaned up the h1x0 series driver a bit, added debug entry for h3x0 that allows to write to the eeprom
2006-08-15 22:54:06 +00:00
eeprom_settings.h
Bootloader support to search firmware also from flash. Bootloader <->
2006-08-09 12:04:13 +00:00
enc_base.h
Forgot to use cvs add on a few new files in the fresh checkout I used. woops.
2006-11-06 18:18:05 +00:00
fat.h
Applied FS# 5736 by Alexander Levin.
2006-07-31 22:59:45 +00:00
fmradio.h
Added FS#2939 Encoder Codec Interface + Codecs by Antonius Hellmann with additional FM Recording support and my modifications
2006-08-28 22:38:41 +00:00
fmradio_i2c.h
Patch #5347 by Rani Hod - Adds FM radio and recording features to the iAudio X5.
2006-07-21 08:42:28 +00:00
font.h
waiting is over: initial unicode commit
2005-12-06 13:27:15 +00:00
gdb_api.h
Mapped iFP DRAM to 0xc00000 and enabled caching in this area.
2006-02-12 23:16:05 +00:00
general.h
Forgot to use cvs add on a few new files in the fresh checkout I used. woops.
2006-11-06 18:18:05 +00:00
generic_i2c.h
Generic bitbang I2C driver
2006-02-22 14:50:57 +00:00
hangul.h
Add support for loadable vkeyboard layouts
2006-03-29 16:21:42 +00:00
hwcompat.h
Renamed has_new_lcd() to is_new_player(), and got rid of the alias
2004-11-22 21:20:54 +00:00
i2c-coldfire.h
Patch #5347 by Rani Hod - Adds FM radio and recording features to the iAudio X5.
2006-07-21 08:42:28 +00:00
i2c-pp5002.h
Renamed the ipod_i2c functions to the more appropriate pp_i2c
2006-10-27 11:24:23 +00:00
i2c-pp5020.h
Renamed the ipod_i2c functions to the more appropriate pp_i2c
2006-10-27 11:24:23 +00:00
i2c.h
Move publicly (from apps) accessed files from drivers/ to export/.
2003-02-07 10:08:02 +00:00
id3.h
AIFF is not (yet) a supported format on HWCODEC targets.
2006-11-06 19:49:05 +00:00
isp1362.h
H300: Rudimentary driver for the ISP1362 USB on-the-go controller. For now it just sends the chip to sleep, solving the poor battery runtime issue.
2006-06-16 17:34:18 +00:00
kernel.h
Patch #6052 - More responsive skip on Archos
2006-10-19 11:43:13 +00:00
lcd-player-charset.h
Added bookmark icon for the Player/Studio
2004-07-14 12:21:59 +00:00
lcd-remote.h
Removed remnants of deprecated lcd_roll().
2006-10-31 19:49:35 +00:00
lcd.h
Removed remnants of deprecated lcd_roll().
2006-10-31 19:49:35 +00:00
led.h
removed old statusbar and buttonbar code
2005-11-20 01:02:14 +00:00
logf.h
decrease to 30
2005-06-30 15:33:43 +00:00
m5636.h
Patch #5639 by Ulrich Pegelow, inits the M5636 USBOTG chip on the X5 to reduce the battery consumption.
2006-07-13 07:40:30 +00:00
mas.h
Renamed CONFIG_HWCODEC and MASNONE to the more appropriate CONFIG_CODEC and SWCODEC, respectively.
2005-08-29 21:15:27 +00:00
mcf5249.h
H300: (1) Use DMA for LCD updates, with auto-aligned line reads. Speeds up LCD updates by ~ 75% at 11MHz and 45MHz. Only ~ 11% speedup at 124MHz due to (2). (2) Less aggressive LCD transfer timing at 124MHz. With the previous timing, slightly corrupted display contents was reported, and with DMA transfers at least 4 waitstates are needed to make updates work at all. * A table in system-iriver.c shows settings for all integer multiples of the base clock frequency (info for developers, not yet complete).
2006-11-02 20:50:50 +00:00
mcf5250.h
Some corrections for MCF5250
2006-02-22 20:48:27 +00:00
mp3_playback.h
Renamed CONFIG_HWCODEC and MASNONE to the more appropriate CONFIG_CODEC and SWCODEC, respectively.
2005-08-29 21:15:27 +00:00
mp3data.h
Archos recording/playback: (1) Xing header creation: * Now estimates the framecount from the recording time if the MAS frame counter saturates, so it always writes a valid Xing header. * Reverted my brainless short-xing-header change. This was only valid for layer 3. (2) Xing/VBRI header evaluation: Fixed possible overflow in bitrate calculation. (3) MPEG thread: Avoid double chunk size limiting for the rare case of 8 MB modded Ondios.
2005-09-15 05:29:26 +00:00
mpeg.h
iRiver: Initial support for wav-recording in recording menu. Supports mic/line-in (and radio), monitor mode, time-splitting (and byte-splitting), pause/resume etc. Things todo: Prerecording, peakmeter (should be simple), frequency other than 44.1 kHz, etc..
2005-11-12 04:00:56 +00:00
panic.h
Better definition & usage of the ATTRIBUTE_PRINTF macro
2005-02-28 09:48:35 +00:00
pcf50605.h
Move all iPod targets into the target tree. FS#5890
2006-10-05 10:58:51 +00:00
pcf50606.h
Moved pcf50606 stuff to target directory.
2006-10-25 23:24:07 +00:00
pcm_playback.h
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
2006-11-06 18:07:30 +00:00
pcm_record.h
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
2006-11-06 18:07:30 +00:00
pcm_sampr.h
Forgot to use cvs add on a few new files in the fresh checkout I used. woops.
2006-11-06 18:18:05 +00:00
pnx0101.h
Iriver iFP7xx sound support.
2006-08-12 21:03:23 +00:00
power.h
Work-in-progress rework of charging status reading & display: * Changed several charging related HAVE_* macros into one multi-value CONFIG_CHARGING. * Always use proper macros for charging states. * Battery symbol charging animation now starts from current level on all targets with charging. Two-colour animation kept for non-b&w targets. Round down fill level while charging as before, but round to nearest pixel value for discharging on all targets. * Charging anim fixed on player. * Some code cleanup.
2006-06-06 22:23:52 +00:00
powermgmt.h
General: changed local adc to voltage conversions in several places to use battery_voltage. Added battery_read_info function for unfiltered battery information. x5: removed adc_read as a distinct function. Removed adc tick task. adc_init is empty inline. Adjusted battery scale, voltage to level array and read 10 bits from the ADC for battery since 255 levels is not enough for true centivolt resolution.
2006-10-30 11:33:38 +00:00
pp5002.h
Initial work for coprocessor support on iPods. FS#5755
2006-08-03 16:29:42 +00:00
pp5020.h
Detect charger connected on H10. No need to sleep(HZ) when powering off.
2006-09-20 23:21:59 +00:00
pp5024.h
added mostly dummy changes to allow building of a Sansa e200 bootloader
2006-08-01 22:28:14 +00:00
profile.h
Fix profile builds
2006-08-24 13:10:20 +00:00
replaygain.h
Add support for parsing binary data ID3 tags. Add support for parsing RVA2 ID3 tags for replaygain values instead of TXXX tags when playing files tagged with ID3v2.4. Patch by psyche78 (task #2937 )
2006-07-20 10:35:20 +00:00
rolo.h
Include File Cleanup And Move-Around Party 2003.
2003-02-07 09:41:57 +00:00
rtc.h
Real Time Clock support in the WPS
2006-03-18 22:42:02 +00:00
s3c2440.h
fix typo
2006-11-05 07:55:00 +00:00
serial.h
Logf output on the serial port for h100 targets
2006-10-12 20:22:16 +00:00
sh7034.h
SH1: Changed UIE() to use the same reset method as on coldfire, using the watchdog timer. Should be more reliable this way. Disabled LED handling and added reboot-with-on for Ondio. * All: #ifdef cleanup in panicf(), added reboot-with-on for Ondio.
2005-11-09 00:54:43 +00:00
sound.h
Patch #5347 by Rani Hod - Adds FM radio and recording features to the iAudio X5.
2006-07-21 08:42:28 +00:00
system.h
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
2006-11-06 18:07:30 +00:00
tcc730.h
beautified code
2005-02-05 10:54:55 +00:00
thread.h
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
2006-11-06 18:07:30 +00:00
timer.h
Simplification for user timer on coldfire. We define TIMER_FREQ separately anyway.
2006-04-04 01:16:11 +00:00
tlv320.h
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
2006-11-06 18:07:30 +00:00
tuner.h
Implement region setting for the fm tuner. The region setting affects deemphasis, band limits and step size. Fixes FS#5929, FS#5928.
2006-10-05 12:40:13 +00:00
uda1380.h
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
2006-11-06 18:07:30 +00:00
usb.h
H300 bootloader USB mode
2005-12-06 12:12:29 +00:00
usb_serial.h
Added non-blocking get/put_byte routines.
2006-02-03 23:28:53 +00:00
wm8731l.h
Move definitions to their proper place
2006-03-30 20:48:15 +00:00
wm8758.h
Add support for displaying the the current path or the full path (or neither) in the file browser. Check General Settings -> File View -> Show Path for the options.
2006-08-15 09:38:13 +00:00
wm8975.h
Fixed line out volume for 4G, Nano and 5G Ipods. Partial patch #4814 by
2006-03-22 13:04:49 +00:00
wmcodec.h
generalise the wolfson codec code a bit
2006-10-20 17:12:42 +00:00
d9f7ac24f4