rockbox/firmware/target/arm/s3c2440/gigabeat-fx/button-meg-fx.c
Michael Sevakis 7d67df94a6 Commit Davide Gentile's patch to make the Gigabeat F/X pad less finicky.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17549 a1c6a512-1295-4272-9138-f99709370657
2008-05-17 00:29:24 +00:00

152 lines
4 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by Linus Nielsen Feltzing
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "cpu.h"
#include "system.h"
#include "button.h"
#include "kernel.h"
#include "backlight.h"
#include "adc.h"
#include "system.h"
#include "backlight-target.h"
static bool headphones_detect;
static bool hold_button = false;
static int const remote_buttons[] =
{
BUTTON_NONE, /* Headphones connected - remote disconnected */
BUTTON_RC_PLAY,
BUTTON_RC_DSP,
BUTTON_RC_REW,
BUTTON_RC_FF,
BUTTON_RC_VOL_UP,
BUTTON_RC_VOL_DOWN,
BUTTON_NONE, /* Remote control attached - no buttons pressed */
BUTTON_NONE, /* Nothing in the headphone socket */
};
void button_init_device(void)
{
/* Some button inputs need the internal pullups disabled to function */
GPGUP|=0x031F;
GPJUP|=0x1FFF;
}
inline bool button_hold(void)
{
return (GPGDAT & (1 << 15));
}
int button_read_device(void)
{
int touchpad;
int buttons;
static int lastbutton;
unsigned short remote_adc;
int btn = BUTTON_NONE;
bool hold_button_old;
/* normal buttons */
hold_button_old = hold_button;
hold_button = button_hold();
#ifndef BOOTLOADER
/* give BL notice if HB state chaged */
if (hold_button != hold_button_old)
backlight_hold_changed(hold_button);
#endif
/* See header for ADC values when remote control buttons are pressed */
/* Only one button can be sensed at a time on the remote. */
/* Need to filter the remote button because the ADC is so fast */
remote_adc = adc_read(ADC_HPREMOTE);
if (remote_adc != ADC_READ_ERROR)
{
/* If there is nothing in the headphone socket, the ADC reads high */
if (remote_adc < 940)
headphones_detect = true;
else
headphones_detect = false;
}
btn = remote_buttons[(remote_adc + 64) / 128];
if (btn != lastbutton)
{
/* if the buttons dont agree twice in a row, then its none */
lastbutton = btn;
btn = BUTTON_NONE;
buttonlight_on();
}
/* Check for hold first - exit if asserted with no button pressed */
if (hold_button)
return btn;
/* the side buttons - Check before doing all of the work on each bit */
buttons = GPGDAT & 0x1F;
if (buttons)
{
if (buttons & (1 << 0))
btn |= BUTTON_POWER;
if (buttons & (1 << 1))
btn |= BUTTON_MENU;
if (buttons & (1 << 2))
btn |= BUTTON_VOL_UP;
if (buttons & (1 << 3))
btn |= BUTTON_VOL_DOWN;
if (buttons & (1 << 4))
btn |= BUTTON_A;
buttonlight_on();
}
/* the touchpad */
touchpad = GPJDAT & 0x10C9;
if (touchpad)
{
if (touchpad & ((1 << 1) | (1 << 0)))
btn |= BUTTON_UP;
if (touchpad & ((1 << 12) | (1 << 11)))
btn |= BUTTON_RIGHT;
if (touchpad & ((1 << 6) | (1 << 5)))
btn |= BUTTON_DOWN;
if (touchpad & ((1 << 8) | (1 << 7)))
btn |= BUTTON_LEFT;
if (touchpad & (1 << 3))
btn |= BUTTON_SELECT;
buttonlight_on();
}
return btn;
}
bool headphones_inserted(void)
{
return headphones_detect;
}