e9de9c1452
Adds the ability to load firmware from other drives on MULTIVOLUME targets Mihail Zenkov <mihail.zenkov@gmail.com> had posted a hard coded patch to allow this on several Sansa players, I made it more universal Redirect file rockbox_main.<name> should placed in root of drive you would like to be main, if this file empty or there a single slash '/' firmware will be loaded from /.rockbox in root of this drive If instead a /<*DIRECTORY*> is supplied in rockbox_main.<name> then firmware will be loaded from /<dir>/.rockbox/ NOTES* The directory can have multiple levels however.. leading slash MUST be included trailing slash can be omitted (eg. /test/.rockbox would be simply '/test' in the redirect file) Redirect file will not work on internal drive (whatever is default boot drive) Volume with the highest index containing redirect file will be loaded first. Firmware file is checked for boot data region, if missing, firmware image will not be loaded. On failure or if no redirect file is found load will fallback to internal drive Currently only Sansa Fuze+, Sansa Clip+, Sansa Clip Zip, Sansa Fuzev2, and Sansa Fuzev1 are implemented. Players (with HAVE_MULTIVOLUME) will need #define HAVE_BOOTDATA and #define BOOT_REDIR "rockbox_main.<name>" added to their config file boot_data is implemented in crt0.s file (See g#1552) ARM and IMX233 have aleady been implemented Once these conditions are met <HAVE_MULTIBOOT> will be defined by config.h Partitions on the drives are able to have a redirect as well. Change-Id: Iada3263919f6bcad7d0d7d8279b4239aafa07ee9
236 lines
6.8 KiB
C
236 lines
6.8 KiB
C
/*
|
|
* This config file is for the Sandisk Sansa Fuze v2
|
|
*/
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 68
|
|
#define MODEL_NAME "Sandisk Sansa Fuze v2"
|
|
/* Define if boot data from bootloader has been enabled for the target */
|
|
#define HAVE_BOOTDATA
|
|
|
|
/* define boot redirect file name allows booting from external drives */
|
|
#define BOOT_REDIR "rockbox_main.fuze2"
|
|
|
|
#define HW_SAMPR_CAPS SAMPR_CAP_ALL
|
|
|
|
/* define this if you have recording possibility */
|
|
#define HAVE_RECORDING
|
|
|
|
#define REC_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
|
|
SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
|
|
SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
|
|
|
|
/* because the samplerates don't match at each point, we must be able to
|
|
* tell PCM which set of rates to use. not needed if recording rates are
|
|
* a simple subset of playback rates and are equal values. */
|
|
#define CONFIG_SAMPR_TYPES
|
|
|
|
/* Default recording levels */
|
|
#define DEFAULT_REC_MIC_GAIN 23
|
|
#define DEFAULT_REC_LEFT_GAIN 23
|
|
#define DEFAULT_REC_RIGHT_GAIN 23
|
|
|
|
/* Define bitmask of input sources - recordable bitmask can be defined
|
|
explicitly if different */
|
|
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
|
|
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR
|
|
|
|
#ifndef BOOTLOADER/* define this if you want album art for this target */
|
|
#define HAVE_ALBUMART
|
|
|
|
/* define this to enable bitmap scaling */
|
|
#define HAVE_BMP_SCALING
|
|
|
|
/* define this to enable JPEG decoding */
|
|
#define HAVE_JPEG
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* define this if you have LCD enable function */
|
|
#define HAVE_LCD_ENABLE
|
|
|
|
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
|
|
should be defined as well.
|
|
#define HAVE_LCD_SLEEP
|
|
#define HAVE_LCD_SLEEP_SETTING
|
|
*/
|
|
|
|
/* define this if you can flip your LCD */
|
|
#define HAVE_LCD_FLIP
|
|
|
|
/* define this if you can invert the colours on your LCD */
|
|
#define HAVE_LCD_INVERT
|
|
|
|
#ifndef BOOTLOADER
|
|
/* define this if you have a real-time clock */
|
|
#define CONFIG_RTC RTC_AS3514
|
|
|
|
/* Define if the device can wake from an RTC alarm */
|
|
#define HAVE_RTC_ALARM
|
|
#endif
|
|
|
|
/* There is no hardware tone control */
|
|
#define HAVE_SW_TONE_CONTROLS
|
|
|
|
/* define this if the unit uses a scrollwheel for navigation */
|
|
#define HAVE_SCROLLWHEEL
|
|
/* define to activate advanced wheel acceleration code */
|
|
#define HAVE_WHEEL_ACCELERATION
|
|
/* define from which rotation speed [degree/sec] on the acceleration starts */
|
|
#define WHEEL_ACCEL_START 720
|
|
/* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
|
|
#define WHEEL_ACCELERATION 1
|
|
|
|
#endif /* !BOOTLOADER */
|
|
|
|
/* put the lcd frame buffer in IRAM */
|
|
#define IRAM_LCDFRAMEBUFFER //IBSS_ATTR
|
|
|
|
#define CONFIG_KEYPAD SANSA_FUZE_PAD
|
|
|
|
/* Define this to have CPU boosted while scrolling in the UI */
|
|
#define HAVE_GUI_BOOST
|
|
|
|
/* Define this to enable morse code input */
|
|
#define HAVE_MORSE_INPUT
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 220
|
|
#define LCD_HEIGHT 176
|
|
/* sqrt(220^2 + 176^2) / 2.2 = 128.1 */
|
|
#define LCD_DPI 128
|
|
#define LCD_DEPTH 16 /* 65536 colours */
|
|
#define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 swapped */
|
|
|
|
|
|
/* AS3514 or newer */
|
|
#define HAVE_AS3514
|
|
#define HAVE_AS3543
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* Some Sansa Fuzes seem to be FAT16 formatted */
|
|
#define HAVE_FAT16SUPPORT
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE (0x100000-0x8000)
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
#define AB_REPEAT_ENABLE
|
|
|
|
/* FM Tuner - suspected to be the SI4702 */
|
|
#define CONFIG_TUNER (SI4700|RDA5802)
|
|
/* #define HAVE_TUNER_PWR_CTRL */
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
#define HAVE_BACKLIGHT_BRIGHTNESS
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
#define MIN_BRIGHTNESS_SETTING 1
|
|
#define MAX_BRIGHTNESS_SETTING 12
|
|
#define DEFAULT_BRIGHTNESS_SETTING 6
|
|
|
|
/* define this if you have a light associated with the buttons */
|
|
#define HAVE_BUTTON_LIGHT
|
|
|
|
/* Which backlight fading type? */
|
|
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
|
|
|
|
/* define this if you have a flash memory storage */
|
|
#define HAVE_FLASH_STORAGE
|
|
|
|
/* define this if the flash memory uses the SecureDigital Memory Card protocol */
|
|
#define CONFIG_STORAGE STORAGE_SD
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 550 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 550 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 550 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
|
|
|
|
/* Charging implemented in a target-specific algorithm */
|
|
#define CONFIG_CHARGING CHARGING_TARGET
|
|
|
|
/* define this if the unit can be powered or charged via USB */
|
|
#define HAVE_USB_POWER
|
|
|
|
/* Define this if you have an AMS AS3525v2 */
|
|
#define CONFIG_CPU AS3525v2
|
|
|
|
/* Define this if you want to use the AS2525 i2c interface */
|
|
#define CONFIG_I2C I2C_AS3525
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
#define HAVE_POWEROFF_WHILE_CHARGING
|
|
|
|
/* define current usage levels (based on battery bench) */
|
|
#define CURRENT_NORMAL 11
|
|
#define CURRENT_BACKLIGHT 30
|
|
#define CURRENT_RECORD CURRENT_NORMAL
|
|
|
|
/* maximum charging current */
|
|
#define CURRENT_MAX_CHG 200
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 192000000
|
|
|
|
/* Type of LCD */
|
|
#define CONFIG_LCD LCD_FUZE
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC and data. These are
|
|
only used when loading the old format rockbox.e200 file */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0x0
|
|
#define FIRMWARE_OFFSET_FILE_DATA 0x8
|
|
|
|
#define HAVE_MULTIDRIVE
|
|
#define NUM_DRIVES 2
|
|
|
|
#ifndef BOOTLOADER
|
|
#define HAVE_HOTSWAP
|
|
#endif
|
|
|
|
/* USB On-the-go */
|
|
#define CONFIG_USBOTG USBOTG_DESIGNWARE
|
|
/* logf() over USB serial (http://www.rockbox.org/wiki/PortalPlayerUsb) */
|
|
//#define USB_ENABLE_SERIAL
|
|
|
|
/* enable these for the experimental usb stack */
|
|
#define HAVE_USBSTACK
|
|
#define USB_VENDOR_ID 0x0781
|
|
#define USB_PRODUCT_ID 0x74c3 /* MSC = 0x74c3, MTP = 0x74c2 */
|
|
#define HAVE_BOOTLOADER_USB_MODE
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
#define HAVE_ADJUSTABLE_CPU_FREQ
|
|
|
|
/*define this to enable CPU voltage scaling on AMS devices*/
|
|
#define HAVE_ADJUSTABLE_CPU_VOLTAGE
|
|
|
|
#define BOOTFILE_EXT "sansa"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
#define ICODE_ATTR_TREMOR_NOT_MDCT
|
|
|
|
#define INCLUDE_TIMEOUT_API
|
|
|
|
/* Define this if a programmable hotkey is mapped */
|
|
#define HAVE_HOTKEY
|