Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export/config/ipodmini1g.h
Michael Sevakis fc9695eb47 Improve radio RDS driver and framework 
* Remove unused bits like the radio event and simplify basic
radio interface. It can be more self-contained with rds.h only
required by radio and tuner code.

* Add post-processing to text a-la Silicon Labs AN243. The chip's
error correction can only do so much; additional checks are highly
recommended. Simply testing for two identical messages in a row
is extremely effective and I've never seen corrupted text since
doing that, even with mediocre reception.

Groups segments must arrive in order, not randomly; logic change
only accepts them in order, starting at 0.

Time readout was made a bit better but really we'd need to use
verbose mode and ensure that no errors were seen during receiving
of time and more checks would be need to have a stable PI. The
text is the important bit anyway.

* Time out of stale text.

* Text is no longer updated until a complete group has been
received, as is specified in the standard. Perhaps go back to
scrolling text lines in the radio screen?

* Add proper character conversion to UTF-8. Only the default G0
table for the moment. The other two could be added in.

* Add variants "RDS_CFG_PROCESS" and "RDS_CFG_PUSH" to allow
the option for processed RDS data to be pushed to the driver and
still do proper post-processing (only text conversion for now for
the latter).

Change-Id: I4d83f8b2e89a209a5096d15ec266477318c66925
2017-02-11 22:19:32 -05:00

234 lines
6.6 KiB
C
Raw Blame History

/*
* This config file is for the Apple iPod Mini (1st Gen)
*/
#define IPOD_ARCH 1
#define MODEL_NAME "Apple iPod Mini 1g"
/* For Rolo and boot loader */
#define MODEL_NUMBER 9
/* define this if you use an ATA controller */
#define CONFIG_STORAGE STORAGE_ATA
/*define this if the ATA controller and method of USB access support LBA48 */
#define HAVE_LBA48
/* define this if you have recording possibility */
/*#define HAVE_RECORDING*/
#define INPUT_SRC_CAPS (SRC_CAP_FMRADIO)
/* define the bitmask of hardware sample rates */
#define HW_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
/* define the bitmask of recording sample rates
#define REC_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) */
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you can invert the colours on your LCD */
#define HAVE_LCD_INVERT
/* define this if the LCD needs to be shutdown */
#define HAVE_LCD_SHUTDOWN
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* LCD dimensions */
#define LCD_WIDTH 138
#define LCD_HEIGHT 110
/* sqrt(138^2 + 110^2) / 1.7 = 105.7 */
#define LCD_DPI 106
#define LCD_DEPTH 2 /* 4 colours - 2bpp */
#define LCD_PIXELFORMAT HORIZONTAL_PACKING
/* Display colours, for screenshots and sim (0xRRGGBB) */
#define LCD_DARKCOLOR 0x000000
#define LCD_BRIGHTCOLOR 0x648764
#define LCD_BL_DARKCOLOR 0x000000
#define LCD_BL_BRIGHTCOLOR 0xdfd8ff
#define HAVE_LCD_CONTRAST
/* LCD contrast */
#define MIN_CONTRAST_SETTING 5
#define MAX_CONTRAST_SETTING 63
#define DEFAULT_CONTRAST_SETTING 40 /* Match boot contrast */
/* define this if you can flip your LCD */
#define HAVE_LCD_FLIP
#define CONFIG_KEYPAD IPOD_4G_PAD
/* Define this to have CPU boosted while scrolling in the UI */
#define HAVE_GUI_BOOST
#define HAVE_SCROLLWHEEL
/* define to activate advanced wheel acceleration code */
#define HAVE_WHEEL_ACCELERATION
/* define from which rotation speed [degree/sec] on the acceleration starts */
#define WHEEL_ACCEL_START 360
/* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
#define WHEEL_ACCELERATION 1
/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_PCF50605
/* Define if the device can wake from an RTC alarm */
#define HAVE_RTC_ALARM
/* Define this if you can switch on/off the accessory power supply */
#define HAVE_ACCESSORY_SUPPLY
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
/* Define this if you have the WM8721 audio codec */
#define HAVE_WM8731
/* WM8721 has no tone controls, so we use the software ones */
#define HAVE_SW_TONE_CONTROLS
#define AB_REPEAT_ENABLE
#define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
/* define this if you have a disk storage, i.e. something
that needs spinups and can cause skips when shaked */
#define HAVE_DISK_STORAGE
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
/* We can fade the backlight by using PWM */
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM
/* Define this if you can detect headphones */
#define HAVE_HEADPHONE_DETECTION
#define BATTERY_CAPACITY_DEFAULT 400 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 400 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 1500 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 10 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
/* define current usage levels */
#define CURRENT_NORMAL 50 /* PP5024 uses ~40mA, so add some for disk */
#define CURRENT_BACKLIGHT 20 /* FIXME: This needs to be measured */
#define CURRENT_RECORD 110 /* FIXME: Needs to be measured */
/* Hardware controlled charging? */
#define CONFIG_CHARGING CHARGING_MONITOR
/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER
/* define this if the unit can have USB charging disabled by user -
:Qa
* if USB/MAIN power is discernable and hardware doesn't compel charging */
#define HAVE_USB_CHARGING_ENABLE
/* Define Apple remote tuner */
#define CONFIG_TUNER IPOD_REMOTE_TUNER
#define HAVE_RDS_CAP
#define CONFIG_RDS RDS_CFG_PUSH
/* Define this if you have a PortalPlayer PP5020 */
#define CONFIG_CPU PP5020
/* Define this if you want to use the PP5020 i2c interface */
#define CONFIG_I2C I2C_PP5020
/* We're able to shut off power to the HDD */
#define HAVE_ATA_POWER_OFF
/* define this if the hardware can be powered off while charging */
//#define HAVE_POWEROFF_WHILE_CHARGING
/* The start address index for ROM builds */
#define ROM_START 0x00000000
/* The size of the flash ROM */
#define FLASH_SIZE 0x100000
/* Define this to the CPU frequency */
#define CPU_FREQ 11289600
#define CONFIG_LCD LCD_IPODMINI
/* Offset ( in the firmware file's header ) to the file length */
#define FIRMWARE_OFFSET_FILE_LENGTH 0
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_ARC
/* enable these for the experimental usb stack */
#define HAVE_USBSTACK
#define USB_VENDOR_ID 0x05ac
#define USB_PRODUCT_ID 0x1205
#define HAVE_USB_HID_MOUSE
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
#define HAVE_HARDWARE_CLICK
#define BOOTFILE_EXT "ipod"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#define ICODE_ATTR_TREMOR_NOT_MDCT
#define IPOD_ACCESSORY_PROTOCOL
#define HAVE_SERIAL
#define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
/* DMA is used only for reading on PP502x because although reads are ~8x faster
* writes appear to be ~25% slower.
*/
#ifndef BOOTLOADER
#define HAVE_ATA_DMA
#endif
/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY
Reference in a new issue View git blame Copy permalink