rockbox/firmware/target/arm
Jack Halpin d414b0a027 Sansa AMS: Reduce MCICLK speed on SD cards to 31 MHz.
This is within the SD Spec for v2 High Speed cards but still over the 25 MHz limit for v1 and non-HS v2 cards.
Test_disk write & verify passes on both internal and uSD.
The v1 cards still need to be lowered to 15 MHz but that causes data crc failures at this point.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23835 a1c6a512-1295-4272-9138-f99709370657
2009-12-03 20:06:40 +00:00
..
archos/av300
as3525 Sansa AMS: Reduce MCICLK speed on SD cards to 31 MHz. 2009-12-03 20:06:40 +00:00
at91sam Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
imx31 Increase stack space for the Gigabeat S specific headphone thread to fix stack overflow when compiled with gcc 4.4 2009-11-20 16:42:07 +00:00
ipod FS#9728: Battery current measuring on the Video iPod 2009-11-03 20:35:04 +00:00
iriver Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar). 2009-10-20 21:54:59 +00:00
olympus Comment out LOGF_ENABLE defines everywhere, replace evil comments 2009-11-03 16:25:03 +00:00
philips Comment out LOGF_ENABLE defines everywhere, replace evil comments 2009-11-03 16:25:03 +00:00
pnx0101 Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
s3c2440 Remove unused card_detect(), and make card_detect_target() static inline in each sd driver. 2009-11-26 00:51:09 +00:00
s5l8700 Meizu M3: configure and use SDRAM 2009-11-11 21:31:38 +00:00
samsung Comment out LOGF_ENABLE defines everywhere, replace evil comments 2009-11-03 16:25:03 +00:00
sandisk Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar). 2009-10-20 21:54:59 +00:00
tatung Tatung Elio: a few more buttons identified 2009-11-24 15:42:54 +00:00
tcc77x Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar). 2009-10-20 21:54:59 +00:00
tcc780x Remove unused card_detect(), and make card_detect_target() static inline in each sd driver. 2009-11-26 00:51:09 +00:00
tms320dm320 M:Robe 500: Improve audio DMA shutdown for Pause/Stop and significantly reduce the size of the DSP code. 2009-12-02 04:30:08 +00:00
adc-as3514.c
adc-pp5020.c
ascodec-pp.c
ascodec-target.h
ata-as-arm.S M:Robe 500 - Enable ASM optimized ATA interface improving disk access speed. 2009-11-09 00:38:10 +00:00
ata-nand-telechips.c Core changes to allow storage drivers to do cleanup on shutdown, and iPod Nano 2G shutdown code rework (FS#10668) 2009-10-09 20:36:09 +00:00
ata-pp5002.c
ata-pp5020.c
ata-sd-pp.c Remove unused card_detect(), and make card_detect_target() static inline in each sd driver. 2009-11-26 00:51:09 +00:00
ata-target.h
audio-pp.c correction on DEFINE, thanks to Kugel who spotted it ;) 2009-12-01 18:11:06 +00:00
crt0-pp-bl.S Make RoLo work on PP5002. * Rename CACHE_CTL flag values on PP5002 for consistency. 2009-10-19 21:38:52 +00:00
crt0-pp.S
crt0.S FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up 2009-06-08 23:05:33 +00:00
ffs-arm.S
i2c-pp.c Philips SA9200: initialize i2c, i2s, and as3514 as the OF does. Fixes clicks/pops heard when reading the adc. 2009-08-01 17:51:00 +00:00
i2c-telechips.c Fix missing i2c mutex initialisation for telechips. 2009-06-21 13:26:32 +00:00
i2s-pp.c Philips SA9200: initialize i2c, i2s, and as3514 as the OF does. Fixes clicks/pops heard when reading the adc. 2009-08-01 17:51:00 +00:00
kernel-pp.c
lcd-as-memframe.S Apply some ARMv6 optimisations to YUV blitting. Speeds up mpegplayer on Gigabeat S by ~2% in undithered and ~7.5% in dithered mode. 2009-07-15 22:14:21 +00:00
lcd-c200_c200v2.c Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar). 2009-10-20 21:54:59 +00:00
lcd-ssd1815.c
memcpy-arm.S
memmove-arm.S
memset-arm.S
memset16-arm.S
mmu-arm.h ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future. 2009-07-05 01:17:25 +00:00
mmu-arm.S Split ARMv6 code from mmu-arm.S 2009-10-18 13:07:14 +00:00
mmu-armv6.S Split ARMv6 code from mmu-arm.S 2009-10-18 13:07:14 +00:00
pcm-pp.c
pcm-telechips.c i7: pcm-telechips fix sampling rate that was about 40000 instead of 44100 2009-09-20 19:53:15 +00:00
powermgmt-ascodec.c
sd-pp-target.h Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD) 2009-07-01 10:07:22 +00:00
system-arm.c Fix dangling #endif 2009-11-14 11:37:16 +00:00
system-arm.h Change "r" back to "i" (i is for immediate, so no syntax error) and reclaim a bit binsize. Live with that those function don't build with -O0 since they rely on inlining. 2009-11-15 22:29:22 +00:00
system-pp502x.c initial commit of remote support for m:robe 100 courtesy of lowlight; simulator support including small fixes for the m:robe 500 2009-07-26 14:26:14 +00:00
system-pp5002.c Make RoLo work on PP5002. * Rename CACHE_CTL flag values on PP5002 for consistency. 2009-10-19 21:38:52 +00:00
system-target.h
timer-pp.c Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
usb-drv-arc.c Comment out LOGF_ENABLE defines everywhere, replace evil comments 2009-11-03 16:25:03 +00:00
usb-fw-pp502x.c make ELIO_TPJ1022 bootloader compile again 2009-07-17 22:07:06 +00:00
usb-fw-pp5002.c
usb-s3c6400x.c Plumb an iPod Nano 2G battery leak that started spilling as soon as USB was used at least once until a reboot. 2009-10-24 20:31:40 +00:00
usb-target.h
usb-tcc.c
wmcodec-pp.c
wmcodec-telechips.c