rockbox/firmware/export
Jonathan Gordon d331d00a2d start of the tsc2100 driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14816 a1c6a512-1295-4272-9138-f99709370657
2007-09-22 14:21:07 +00:00
..
adc.h Moved SH1 ADC to target tree. 2007-04-15 23:35:56 +00:00
arcotg_udc.h Usb Stack: only setup packet handling, and not enabled by default as there is a lot to do. 2007-08-27 16:04:32 +00:00
as3514.h Sansa c200 port. Rockbox works with sound. Several features are disabled including some lcd options, FM radio, recording, and all plugins. Loading the OF from the Rockbox bootloader does not work. 2007-09-06 03:28:58 +00:00
ata.h
ata_idle_notify.h
ata_mmc.h Accept FS#7134 - Sansa: external sd card support by Antonius Hellmann with some tweaks. All testers have given the green light. (Now for the RED ?? ;). 2007-06-30 02:08:27 +00:00
audio.h Even more optimizing for the recording name change... 2007-08-02 18:45:38 +00:00
audiohw.h Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks. 2007-09-21 15:51:53 +00:00
backlight.h Removed special X5 backlight handling, and replaced it with a generic system that makes the backlight light up on shutdown and not time out unless it's completely disabled in the current player state. 2007-08-12 11:18:52 +00:00
bidi.h
bitswap.h
buffer.h
button.h Wheel acceleration for e200. A general acceleration interface intended for use on any scroll target and by any code. A general interface to obtain data associated with most recently dequeued button presses and actions. Use #define HAVE_SCROLLWHEEL and set appropriate constants, values in the scroller driver that feel right. 2007-07-22 21:02:24 +00:00
config-c200.h Allow the volume keys to be used in lists. Fix the sim buttons. 2007-09-08 03:30:32 +00:00
config-e200.h Firmware "hacker" code for the e200r install so the full bootloader rom doesnt need to be written. 2007-09-09 11:20:20 +00:00
config-fmrecorder.h First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. 2007-08-17 06:45:18 +00:00
config-gigabeat-s.h Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks. 2007-09-21 15:51:53 +00:00
config-gigabeat.h First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. 2007-08-17 06:45:18 +00:00
config-h10.h Increase Max settable battery capacity for the H10, closes FS#7795 2007-09-18 21:10:47 +00:00
config-h10_5gb.h Add the define for the usb stack (in comment) on targets that can be used for it. 2007-08-29 00:20:01 +00:00
config-h100.h First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. 2007-08-17 06:45:18 +00:00
config-h120.h First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. 2007-08-17 06:45:18 +00:00
config-h300.h First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. 2007-08-17 06:45:18 +00:00
config-iaudiom5.h First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. 2007-08-17 06:45:18 +00:00
config-iaudiox5.h First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. 2007-08-17 06:45:18 +00:00
config-ifp7xx.h Disable tagcache on iriver iFP to save some memory. 2007-09-20 22:16:08 +00:00
config-ipod1g2g.h First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. 2007-08-17 06:45:18 +00:00
config-ipod3g.h Allow higher battery capacities to be set for ipod 3G, closes FS#7782 2007-09-15 07:46:43 +00:00
config-ipod4g.h Accept patch in FS#6869 by Justin Foell, increases maximum settable battery capacity to 1200 mAh for ipod color and 4g, closes FS#6422 2007-09-02 07:31:10 +00:00
config-ipodcolor.h Accept patch in FS#6869 by Justin Foell, increases maximum settable battery capacity to 1200 mAh for ipod color and 4g, closes FS#6422 2007-09-02 07:31:10 +00:00
config-ipodmini.h Add the define for the usb stack (in comment) on targets that can be used for it. 2007-08-29 00:20:01 +00:00
config-ipodmini2g.h Add the define for the usb stack (in comment) on targets that can be used for it. 2007-08-29 00:20:01 +00:00
config-ipodnano.h Add the define for the usb stack (in comment) on targets that can be used for it. 2007-08-29 00:20:01 +00:00
config-ipodvideo.h Add the define for the usb stack (in comment) on targets that can be used for it. 2007-08-29 00:20:01 +00:00
config-mrobe500.h start of the tsc2100 driver. 2007-09-22 14:21:07 +00:00
config-ondiofm.h First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. 2007-08-17 06:45:18 +00:00
config-ondiosp.h First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. 2007-08-17 06:45:18 +00:00
config-player.h First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. 2007-08-17 06:45:18 +00:00
config-recorder.h First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. 2007-08-17 06:45:18 +00:00
config-recorderv2.h First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. 2007-08-17 06:45:18 +00:00
config-tpj1022.h First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. 2007-08-17 06:45:18 +00:00
config.h Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks. 2007-09-21 15:51:53 +00:00
config_caps.h Straighten out some audio path APIs and misc. audio stuff. Having recording is not a prerequisite to having input/output source selection which is probably most useful when adding a audio input features like FM to a new port without forcing recording to be implemented first. 2007-06-08 23:42:04 +00:00
cpu.h Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks. 2007-09-21 15:51:53 +00:00
debug.h Fix simulator builds, and some debugf() format strings. 2007-03-17 09:54:28 +00:00
disk.h Partition type 0x84 is "OS/2 hidden C: drive" 2007-03-16 14:41:55 +00:00
dm320.h m:robe 500i port: Add primitives for the SPI bus and start moving toward new-style register definitions. 2007-09-21 09:06:02 +00:00
ds2411.h
eeprom_24cxx.h
eeprom_settings.h
enc_base.h Assumption about there being MPEG1-only samplerates available and therefore MPEG1-only bitrates for recording is no longer valid. Fix that. 2007-06-06 21:24:20 +00:00
fat.h
fmradio.h
fmradio_i2c.h
font.h Tab police 2007-09-14 16:04:01 +00:00
gdb_api.h
general.h
generic_i2c.h
hangul.h
hotswap.h Some rewriting of the e200 ata driver. No more panicing. Faster card multiplexing. Some calculated yielding (further tuneable if needed). Hopefully more reliable in general. Easy revert if rebellious. 2007-07-25 06:15:07 +00:00
hwcompat.h Remove the hack which read the ipod hardware revision from flash in the bootloader and passed it to Rockbox via a fixed address in SDRAM. Rockbox now remaps flash and so can just read the value itself. Also clean up the debug menu a little - only display the hw revision for ipods, and add the lcd_type variable to indicate the type of LCD (0 or 1) for ipod Color/Photo. 2007-07-25 13:12:38 +00:00
i2c-coldfire.h
i2c-pp.h
i2c.h
i2s.h Reenable scaling on Sansa since a reasonable solution to clicks has been found. 2007-07-26 10:46:17 +00:00
id3.h Remove the ID3 tag version priority setting on the grounds of it being pretty pointless. ID3v2 tags are superior to ID3v1 tags, and needs less seeking around to find. 2007-09-19 10:40:55 +00:00
imx31l.h Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks. 2007-09-21 15:51:53 +00:00
isp1362.h
kernel.h Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks. 2007-09-21 15:51:53 +00:00
lcd-charcell.h Hmpf, these ever-missing svn properties... 2007-04-06 11:22:26 +00:00
lcd-remote.h Enable a lot more features for simulators and add stubs where necessary, simulators should now work with identical lng and voice files as the respective target 2007-08-12 19:49:03 +00:00
lcd.h Straignten out some issues with HAVE_LCD_ENABLE. 1g/2g/3g had it defined but it shouldn't have been. lcd_enabled() was only available as a real function on gigabeat but others can use that too. Markup lcd.h a bit because I got a bit lost in it. 2007-07-31 12:43:06 +00:00
led.h
linkedlist.h fix red and yellow - i hope and double content in some files.. dont ask how this could happen 2007-08-27 16:26:56 +00:00
logf.h Fix simulator builds, and some debugf() format strings. 2007-03-17 09:54:28 +00:00
lv24020lp.h e200: Tuner driver needs to yield alot and also be mutexed. FM debug screen got broken again and was ignoring cancellation and not drawing the lines. 2007-07-14 22:00:50 +00:00
m5636.h
mas.h
mas35xx.h make audiohw.h include the DAC header files 2007-05-22 20:17:35 +00:00
mcf5249.h
mcf5250.h
mp3_playback.h Accept FS#7264 'Build with -Os switch for coldfire targets'. 2007-06-13 15:35:07 +00:00
mp3data.h
mpeg.h Remove the ID3 tag version priority setting on the grounds of it being pretty pointless. ID3v2 tags are superior to ID3v1 tags, and needs less seeking around to find. 2007-09-19 10:40:55 +00:00
panic.h
pcf50605.h
pcf50606.h
pcm_playback.h
pcm_record.h Use bitmasks to define which inputs are available. Makes it easier to remove old assumptions of which are available. Inspired by e200 being unique in having FM Radio and Mic but no Line. Doesn't remove the assumption that Mic is available or that one of Mic and/or Line is available just to avoid excessive #ifdef'ing until needed. 2007-05-20 20:26:36 +00:00
pcm_sampr.h e200: Add recording. Just from MIC right now and FM integration will happen soon. Most every bit of weirdness is nescessary and no problems seem to exist that the retailos doesn't exhibit too (namely noise when LCD is on when recording from MIC). 2007-06-05 07:03:30 +00:00
pnx0101.h PNX0101: new register names and polishing support for Clock Generation Unit 2007-09-20 22:13:48 +00:00
power.h Moved archos power handling into target tree. * Tuner power handling cleaned up a bit. 2007-08-14 22:06:23 +00:00
powermgmt.h First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. 2007-08-17 06:45:18 +00:00
pp5002.h Firewire detection with reboot into diskmode for all iPods that support it (all but Nano and Video). * Hack for compiling iPod G3 removed. * Code cleanup. 2007-08-01 22:44:02 +00:00
pp5020.h Add some new findings to the PP header files. * Clean up ata-target.h for PP. * check_registers() seems to work fine on PP5002. 2007-08-01 10:43:45 +00:00
pp5024.h Accept FS#7134 - Sansa: external sd card support by Antonius Hellmann with some tweaks. All testers have given the green light. (Now for the RED ?? ;). 2007-06-30 02:08:27 +00:00
profile.h
replaygain.h Small ReplayGain cleanup. Move RVA2 specific code to id3.c and don't do the parsing via strings. Generalize parts of the code for later use by MPC. Make some local functions static. Add and update some comments for clarity. 2007-08-25 10:25:13 +00:00
rolo.h
rtc.h Set CONFIG_RTC to 0 for non-RTC targets, and check with #if to profit from -Wundef. No code change. 2007-03-16 23:47:03 +00:00
s1a0903x01.h Fix all the red this time? 2007-07-14 13:41:59 +00:00
s3c2440.h Get rid of yellow plus an optimization I should have seen in the first place. 2007-07-05 08:21:10 +00:00
scroll_engine.h Scroll on main and remote with a single thread. Change the way system messages are defined before running out is an issue (which requires a full update of rockbox on the player). 2007-07-28 08:12:05 +00:00
serial.h
sh7034.h
sound.h make audiohw.h include the DAC header files 2007-05-22 20:17:35 +00:00
spdif.h Straighten out some audio path APIs and misc. audio stuff. Having recording is not a prerequisite to having input/output source selection which is probably most useful when adding a audio input features like FM to a new port without forcing recording to be implemented first. 2007-06-08 23:42:04 +00:00
spi.h start of the tsc2100 driver. 2007-09-22 14:21:07 +00:00
structec.h
sw_i2c.h
system.h Messages queues must be guarded on both ends or else it's a race between detecting a message present and missing a wakeup on thread about to wait. Keeping IRQs from interacting with the scheduler would be preferable but this should do at the moment. Add more detailed panic info regarding blocking violations so we know who. Make panicf function well enough on Gigabeat and PortalPlayer targets. Move the core sleep instructions into a CPU-specific inline to keep thing organized. 2007-05-12 05:20:04 +00:00
tea5767.h Do some planned radio interface cleanup since adding in the LV24020LP. 2007-07-14 11:20:31 +00:00
thread.h Sim I/O and threading that runs more like on target. Tweakable if any genuine slowness imitation is required for any one of them. One point of concern is the sim shutdown on an OS other than Linux just because terminating threads in a manner other than having the do it themselves is kind of dirty IMHO. 2007-09-08 12:20:53 +00:00
timer.h Beginning of an M:Robe 500i port. Currently only in the bootloader stage. Needs another piece of code to start the boot process - will be in the wiki. 2007-09-20 04:46:41 +00:00
tlv320.h * changed pararmeter of audiohw_mute from int to bool 2007-06-13 06:33:40 +00:00
tsc2100.h start of the tsc2100 driver. 2007-09-22 14:21:07 +00:00
tuner.h Moved archos power handling into target tree. * Tuner power handling cleaned up a bit. 2007-08-14 22:06:23 +00:00
uda1380.h * changed pararmeter of audiohw_mute from int to bool 2007-06-13 06:33:40 +00:00
usb.h Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks. 2007-09-21 15:51:53 +00:00
usb_ch9.h fix red and yellow - i hope and double content in some files.. dont ask how this could happen 2007-08-27 16:26:56 +00:00
usb_serial.h
usbstack.h usb stack code police, fix some warnings and set svn keywords correctly 2007-09-19 23:20:55 +00:00
wm8731l.h * changed pararmeter of audiohw_mute from int to bool 2007-06-13 06:33:40 +00:00
wm8751.h Fix my mistakes in some bits in the WM8751 header. Looks like adaptive boost has been turned on by mistake anyway. Correct that and make sure it is turned on intentionally with the #define. Organize a little bit in there. 2007-07-17 00:23:56 +00:00
wm8758.h * changed pararmeter of audiohw_mute from int to bool 2007-06-13 06:33:40 +00:00
wm8975.h * changed pararmeter of audiohw_mute from int to bool 2007-06-13 06:33:40 +00:00
wmcodec.h fix red 2007-06-13 06:41:27 +00:00