Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/as3525/usb-drv-as3525.c
Rafaël Carré 6b46cc08ed as3525: hide our UNCACHED_ADDR from usb_storage.c 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26178 a1c6a512-1295-4272-9138-f99709370657
2010-05-19 18:13:06 +00:00

1060 lines
33 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright © 2009 Rafaël Carré
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "system.h"
#include "usb.h"
#include "usb_drv.h"
#include "as3525.h"
#include "clock-target.h"
#include "ascodec.h"
#include "as3514.h"
#include <stdbool.h>
#include "panic.h"
/*#define LOGF_ENABLE*/
#define LOGF_ENABLE
#include "logf.h"
#include "usb_ch9.h"
#include "usb_core.h"
#include "string.h"
#if defined(USE_ROCKBOX_USB)
#define USB_NUM_EPS 4
typedef struct {
volatile unsigned long offset[4096];
} __regbase;
/*
* This generates better code.
* Stripped object size with __regbase construct: 5192
* Stripped object size with *((volatile int)(x)): 5228
*/
#define USB_REG(x) ((__regbase *)(USB_BASE))->offset[(x)>>2]
/* 4 input endpoints */
#define USB_IEP_CTRL(i) USB_REG(0x0000 + i*0x20)
#define USB_IEP_STS(i) USB_REG(0x0004 + i*0x20)
/* txfsize: bits 0-15 */
#define USB_IEP_TXFSIZE(i) USB_REG(0x0008 + i*0x20)
/* mps: bits 0-10 (max 2047) */
#define USB_IEP_MPS(i) USB_REG(0x000C + i*0x20)
#define USB_IEP_DESC_PTR(i) USB_REG(0x0014 + i*0x20)
#define USB_IEP_STS_MASK(i) USB_REG(0x0018 + i*0x20)
/* 4 output endpoints */
#define USB_OEP_CTRL(i) USB_REG(0x0200 + i*0x20)
#define USB_OEP_STS(i) USB_REG(0x0204 + i*0x20)
/* 'rx packet frame number' */
#define USB_OEP_RXFR(i) USB_REG(0x0208 + i*0x20)
/* mps: bits 0-10 (max 2047), bits 23-31 are fifo size */
#define USB_OEP_MPS(i) USB_REG(0x020C + i*0x20)
#define USB_OEP_SUP_PTR(i) USB_REG(0x0210 + i*0x20)
#define USB_OEP_DESC_PTR(i) USB_REG(0x0214 + i*0x20)
#define USB_OEP_STS_MASK(i) USB_REG(0x0218 + i*0x20)
/* more general macro */
/* d: true => IN, false => OUT */
#define USB_EP_CTRL(i,d) USB_REG(0x0000 + i*0x20 + (!d)*0x0200)
#define USB_EP_STS(i,d) USB_REG(0x0004 + i*0x20 + (!d)*0x0200)
#define USB_EP_TXFSIZE(i,d) USB_REG(0x0008 + i*0x20 + (!d)*0x0200)
#define USB_EP_MPS(i,d) USB_REG(0x000C + i*0x20 + (!d)*0x0200)
#define USB_EP_DESC_PTR(i,d) USB_REG(0x0014 + i*0x20 + (!d)*0x0200)
#define USB_EP_STS_MASK(i,d) USB_REG(0x0018 + i*0x20 + (!d)*0x0200)
#define USB_DEV_CFG USB_REG(0x0400)
#define USB_DEV_CTRL USB_REG(0x0404)
#define USB_DEV_STS USB_REG(0x0408)
#define USB_DEV_INTR USB_REG(0x040C)
#define USB_DEV_INTR_MASK USB_REG(0x0410)
#define USB_DEV_EP_INTR USB_REG(0x0414)
#define USB_DEV_EP_INTR_MASK USB_REG(0x0418)
/* NOTE: Not written to in OF, most lied in host mode? */
#define USB_PHY_EP0_INFO USB_REG(0x0504)
#define USB_PHY_EP1_INFO USB_REG(0x0508)
#define USB_PHY_EP2_INFO USB_REG(0x050C)
#define USB_PHY_EP3_INFO USB_REG(0x0510)
#define USB_PHY_EP4_INFO USB_REG(0x0514)
#define USB_PHY_EP5_INFO USB_REG(0x0518)
/* 4 channels */
#define USB_HOST_CH_SPLT(i) USB_REG(0x1000 + i*0x20)
#define USB_HOST_CH_STS(i) USB_REG(0x1004 + i*0x20)
#define USB_HOST_CH_TXFSIZE(i) USB_REG(0x1008 + i*0x20)
#define USB_HOST_CH_REQ(i) USB_REG(0x100C + i*0x20)
#define USB_HOST_CH_PER_INFO(i) USB_REG(0x1010 + i*0x20)
#define USB_HOST_CH_DESC_PTR(i) USB_REG(0x1014 + i*0x20)
#define USB_HOST_CH_STS_MASK(i) USB_REG(0x1018 + i*0x20)
#define USB_HOST_CFG USB_REG(0x1400)
#define USB_HOST_CTRL USB_REG(0x1404)
#define USB_HOST_INTR USB_REG(0x140C)
#define USB_HOST_INTR_MASK USB_REG(0x1410)
#define USB_HOST_CH_INTR USB_REG(0x1414)
#define USB_HOST_CH_INTR_MASK USB_REG(0x1418)
#define USB_HOST_FRAME_INT USB_REG(0x141C)
#define USB_HOST_FRAME_REM USB_REG(0x1420)
#define USB_HOST_FRAME_NUM USB_REG(0x1424)
#define USB_HOST_PORT0_CTRL_STS USB_REG(0x1500)
#define USB_OTG_CSR USB_REG(0x2000)
#define USB_I2C_CSR USB_REG(0x2004)
#define USB_GPIO_CSR USB_REG(0x2008)
#define USB_SNPSID_CSR USB_REG(0x200C)
#define USB_USERID_CSR USB_REG(0x2010)
#define USB_USER_CONF1 USB_REG(0x2014)
#define USB_USER_CONF2 USB_REG(0x2018)
#define USB_USER_CONF3 USB_REG(0x201C)
#define USB_USER_CONF4 USB_REG(0x2020)
/* USER_CONF5 seems to the same as USBt least on read */
#define USB_USER_CONF5 USB_REG(0x2024)
/* write bits 31..16 */
#define USB_GPIO_IDDIG_SEL (1<<30)
#define USB_GPIO_FS_DATA_EXT (1<<29)
#define USB_GPIO_FS_SE0_EXT (1<<28)
#define USB_GPIO_FS_XCVR_OWNER (1<<27)
#define USB_GPIO_TX_ENABLE_N (1<<26)
#define USB_GPIO_TX_BIT_STUFF_EN (1<<25)
#define USB_GPIO_BSESSVLD_EXT (1<<24)
#define USB_GPIO_ASESSVLD_EXT (1<<23)
#define USB_GPIO_VBUS_VLD_EXT (1<<22)
#define USB_GPIO_VBUS_VLD_EXT_SEL (1<<21)
#define USB_GPIO_XO_ON (1<<20)
#define USB_GPIO_CLK_SEL11 (3<<18)
#define USB_GPIO_CLK_SEL10 (2<<18)
#define USB_GPIO_CLK_SEL01 (1<<18)
#define USB_GPIO_CLK_SEL00 (0<<18)
#define USB_GPIO_XO_EXT_CLK_ENBN (1<<17)
#define USB_GPIO_XO_REFCLK_ENB (1<<16)
/* readronly bits 15..0 */
#define USB_GPIO_PHY_VBUSDRV (1<< 1)
#define USB_GPIO_HS_INTR (1<< 0)
/* Device Control Register and bit fields */
#define USB_DEV_CTRL_REMOTE_WAKEUP 0x00000001 // set remote wake-up signal
#define USB_DEV_CTRL_RDE 0x00000004 // receive dma enable
#define USB_DEV_CTRL_DESC_UPDATE 0x00000010 // descriptor update
#define USB_DEV_CTRL_THRES_ENABLE 0x00000080 // threshold enable
#define USB_DEV_CTRL_BURST_CONTROL 0x00000100 // burst control
#define USB_DEV_CTRL_SOFT_DISCONN 0x00000400 // soft disconnect
#define USB_DEV_CTRL_APCSR_DONE 0x00002000 // app Prog CSR Done
#define USB_DEV_CTRL_MASK_BURST_LEN 0x000f0000 // mask for burst length
#define USB_DEV_CTRL_MASK_THRESHOLD_LEN 0xff000000 // mask for threshold length
/* settings of burst length for maskBurstLen_c field */
#define USB_DEV_CTRL_BLEN_1DWORD 0x00000000
#define USB_DEV_CTRL_BLEN_2DWORDS 0x00010000
#define USB_DEV_CTRL_BLEN_4DWORDS 0x00020000
#define USB_DEV_CTRL_BLEN_8DWORDS 0x00030000
#define USB_DEV_CTRL_BLEN_16DWORDS 0x00040000
#define USB_DEV_CTRL_BLEN_32DWORDS 0x00050000
#define USB_DEV_CTRL_BLEN_64DWORDS 0x00060000
#define USB_DEV_CTRL_BLEN_128DWORDS 0x00070000
#define USB_DEV_CTRL_BLEN_256DWORDS 0x00080000
#define USB_DEV_CTRL_BLEN_512DWORDS 0x00090000
/* settings of threshold length for maskThresholdLen_c field */
#define USB_DEV_CTRL_TLEN_1DWORD 0x00000000
#define USB_DEV_CTRL_TLEN_HALFMAXSIZE 0x01000000
#define USB_DEV_CTRL_TLEN_4THMAXSIZE 0x02000000
#define USB_DEV_CTRL_TLEN_8THMAXSIZE 0x03000000
#define USB_DEV_CFG_HS 0x00000000
#define USB_DEV_CFG_FS 0x00000001 /* 30 or 60MHz */
#define USB_DEV_CFG_LS 0x00000002
#define USB_DEV_CFG_FS_48 0x00000003 /* 48MHz */
#define USB_DEV_CFG_REMOTE_WAKEUP 0x00000004
#define USB_DEV_CFG_SELF_POWERED 0x00000008
#define USB_DEV_CFG_SYNC_FRAME 0x00000010
#define USB_DEV_CFG_PI_16BIT 0x00000000
#define USB_DEV_CFG_PI_8BIT 0x00000020
#define USB_DEV_CFG_UNI_DIR 0x00000000
#define USB_DEV_CFG_BI_DIR 0x00000040
#define USB_DEV_CFG_STAT_ACK 0x00000000
#define USB_DEV_CFG_STAT_STALL 0x00000080
/* Device Status Register and bit fields */
#define USB_DEV_STS_MASK_CFG 0x0000000f
#define USB_DEV_STS_MASK_IF 0x000000f0
#define USB_DEV_STS_MASK_ALT_SET 0x00000f00
#define USB_DEV_STS_SUSPEND_STAT 0x00001000
#define USB_DEV_STS_MASK_SPD 0x00006000 /* Enumerated Speed */
#define USB_DEV_STS_SPD_HS 0x00000000
#define USB_DEV_STS_SPD_FS 0x00002000
#define USB_DEV_STS_SPD_LS 0x00004000
#define USB_DEV_STS_RXF_EMPTY 0x00008000
#define USB_DEV_STS_MASK_FRM_NUM 0xfffc0000 /* SOF frame number */
/* Device Intr Register and bit fields */
#define USB_DEV_INTR_SET_CONFIG 0x00000001 /* set configuration cmd rcvd */
#define USB_DEV_INTR_SET_INTERFACE 0x00000002 /* set interface command rcvd */
#define USB_DEV_INTR_EARLY_SUSPEND 0x00000004 /* idle on usb for 3ms */
#define USB_DEV_INTR_USB_RESET 0x00000008 /* usb bus reset req */
#define USB_DEV_INTR_USB_SUSPEND 0x00000010 /* usb bus suspend req */
#define USB_DEV_INTR_SOF 0x00000020 /* SOF seen on bus */
#define USB_DEV_INTR_ENUM_DONE 0x00000040 /* usb speed enum done */
#define USB_DEV_INTR_OTG 0x00000080 /* otg status change? */
#define USB_DEV_INTR_BUSERR 0x00000080 /* AHB DMA error */
/* EP Control Register Fields */
#define USB_EP_CTRL_STALL 0x00000001
#define USB_EP_CTRL_FLUSH 0x00000002 /* EP In data fifo Flush */
#define USB_EP_CTRL_SNOOP_MODE 0x00000004 // snoop mode for out endpoint
#define USB_EP_CTRL_PD 0x00000008 /* EP Poll Demand */
#define USB_EP_CTRL_EPTYPE_MASK 0x00000030 // bit 5-4: endpoint types
#define USB_EP_TYPE_CONTROL 0x00000000 // control endpoint
#define USB_EP_TYPE_ISO 0x00000010 // isochronous endpoint
#define USB_EP_TYPE_BULK 0x00000020 // bulk endpoint
#define USB_EP_TYPE_INTERRUPT 0x00000030 // interrupt endpoint
#define USB_EP_CTRL_NAK 0x00000040 /* EP NAK Status */
#define USB_EP_CTRL_SNAK 0x00000080 /* EP Set NAK Bit */
#define USB_EP_CTRL_CNAK 0x00000100 /* EP Clr NAK Bit */
#define USB_EP_CTRL_ACT 0x00000400 /* EP Clr NAK Bit */
/* bit fields in EP Status Register */
#define USB_EP_STAT_OUT_RCVD 0x00000010 /* OUT token received */
#define USB_EP_STAT_SETUP_RCVD 0x00000020 /* SETUP token received */
#define USB_EP_STAT_IN 0x00000040 /* IN token received? */
#define USB_EP_STAT_BNA 0x00000080 /* Buffer Not Available */
#define USB_EP_STAT_BUFF_ERROR 0x00000100
#define USB_EP_STAT_HERR 0x00000200 /* Host Error */
#define USB_EP_STAT_AHB_ERROR 0x00000200
#define USB_EP_STAT_TDC 0x00000400 /* Transmit DMA Complete */
/*-------------------------*/
/* DMA Related Definitions */
/*-------------------------*/
/* dma status */
#define USB_DMA_DESC_BUFF_STS 0x80000000 /* Buffer Status */
#define USB_DMA_DESC_BS_HST_RDY 0x80000000 /* Host Ready */
#define USB_DMA_DESC_BS_DMA_DONE 0x00000000 /* DMA Done */
#define USB_DMA_DESC_ZERO_LEN 0x40000000 /* zero length packet */
#define USB_DMA_DESC_EARY_INTR 0x20000000 /* early interrupt */
#define USB_DMA_DESC_RXTX_STS 0x10000000
#define USB_DMA_DESC_RTS_SUCC 0x00000000 /* Success */
#define USB_DMA_DESC_RTS_BUFERR 0x10000000 /* Buffer Error */
#define USB_DMA_DESC_LAST 0x08000000
#define USB_DMA_DESC_MASK_FRAM_NUM 0x07ff0000 // bits 26-16: frame number for iso
#define USB_DMA_DESC_RXTX_BYTES 0x0000FFFF
/* setup descriptor */
#define SETUP_MASK_CONFIG_STAT 0x0fff0000
#define SETUP_MASK_CONFIG_NUM 0x0f000000
#define SETUP_MASK_IF_NUM 0x00f00000
#define SETUP_MASK_ALT_SETNUM 0x000f0000
#define EP_STATE_ALLOCATED 0x00000001
#define EP_STATE_BUSY 0x00000002
#define EP_STATE_ASYNC 0x00000004
struct usb_dev_dma_desc {
int status;
int resv;
void *data_ptr;
void *next_desc;
};
struct usb_dev_setup_buf {
int status;
int resv;
int data1; /* first 4 bytes of data */
int data2; /* last 4 bytes of data */
};
struct usb_endpoint
{
void *buf;
unsigned int len;
volatile unsigned int state;
int rc;
struct wakeup complete;
struct usb_dev_dma_desc *uc_desc;
};
static struct usb_endpoint endpoints[USB_NUM_EPS][2];
/*
* dma/setup descriptors and buffers should avoid sharing
* a cacheline with other data.
* dmadescs may share with each other, since we only access them uncached.
*/
static struct usb_dev_dma_desc dmadescs[USB_NUM_EPS][2] __attribute__((aligned(32)));
/* reuse unused EP2 OUT descriptor here */
static struct usb_dev_setup_buf *setup_desc = (void*)&dmadescs[2][1];
#if AS3525_MCLK_SEL != AS3525_CLK_PLLB
static inline void usb_enable_pll(void)
{
CGU_COUNTB = CGU_LOCK_CNT;
CGU_PLLB = AS3525_PLLB_SETTING;
CGU_PLLBSUP = 0; /* enable PLLB */
while(!(CGU_INTCTRL & CGU_PLLB_LOCK)); /* wait until PLLB is locked */
}
static inline void usb_disable_pll(void)
{
CGU_PLLBSUP = CGU_PLL_POWERDOWN;
}
#else
static inline void usb_enable_pll(void)
{
}
static inline void usb_disable_pll(void)
{
}
#endif /* AS3525_MCLK_SEL != AS3525_CLK_PLLB */
void usb_attach(void)
{
usb_enable(true);
}
static inline void usb_delay(int delay)
{ //TUNEME : delay is in milliseconds
delay <<= 14;
while(delay--) ;
}
static void usb_phy_on(void)
{
/* PHY clock */
CGU_USB = 1<<5 /* enable */
| (CLK_DIV(AS3525_PLLB_FREQ, 48000000) / 2) << 2
| 2; /* source = PLLB */
/* UVDD on */
ascodec_write(AS3515_USB_UTIL, ascodec_read(AS3515_USB_UTIL) | (1<<4));
usb_delay(100);
/* reset */
CCU_SRC = CCU_SRC_USB_AHB_EN|CCU_SRC_USB_PHY_EN;
CCU_SRL = CCU_SRL_MAGIC_NUMBER;
usb_delay(1);
CCU_SRC = CCU_SRC_USB_AHB_EN;
usb_delay(1);
CCU_SRC = CCU_SRL = 0;
USB_GPIO_CSR = USB_GPIO_TX_ENABLE_N
| USB_GPIO_TX_BIT_STUFF_EN
| USB_GPIO_XO_ON
| USB_GPIO_CLK_SEL10; /* 0x06180000; */
}
static void usb_phy_suspend(void)
{
USB_GPIO_CSR |= USB_GPIO_ASESSVLD_EXT |
USB_GPIO_BSESSVLD_EXT |
USB_GPIO_VBUS_VLD_EXT;
usb_delay(3);
USB_GPIO_CSR |= USB_GPIO_VBUS_VLD_EXT_SEL;
usb_delay(10);
}
static void usb_phy_resume(void)
{
USB_GPIO_CSR &= ~(USB_GPIO_ASESSVLD_EXT |
USB_GPIO_BSESSVLD_EXT |
USB_GPIO_VBUS_VLD_EXT);
usb_delay(3);
USB_GPIO_CSR &= ~USB_GPIO_VBUS_VLD_EXT_SEL;
usb_delay(10);
}
static void setup_desc_init(struct usb_dev_setup_buf *desc)
{
struct usb_dev_setup_buf *uc_desc = AS3525_UNCACHED_ADDR(desc);
uc_desc->status = USB_DMA_DESC_BS_HST_RDY;
uc_desc->resv = 0xffffffff;
uc_desc->data1 = 0xffffffff;
uc_desc->data2 = 0xffffffff;
}
static void dma_desc_init(int ep, int dir)
{
struct usb_dev_dma_desc *desc = &dmadescs[ep][dir];
struct usb_dev_dma_desc *uc_desc = AS3525_UNCACHED_ADDR(desc);
endpoints[ep][dir].uc_desc = uc_desc;
uc_desc->status = USB_DMA_DESC_BS_DMA_DONE | \
USB_DMA_DESC_LAST | \
USB_DMA_DESC_ZERO_LEN;
uc_desc->resv = 0xffffffff;
uc_desc->data_ptr = 0;
uc_desc->next_desc = 0;
}
static void reset_endpoints(int init)
{
int i;
/*
* OUT EP 2 is an alias for OUT EP 0 on this HW!
*
* Resonates with "3 bidirectional- plus 1 in-endpoints in device mode"
* from the datasheet, but why ep2 and not ep3?
*
* Reserve it here so we will skip over it in request_endpoint().
*/
endpoints[2][1].state |= EP_STATE_ALLOCATED;
for(i = 0; i < USB_NUM_EPS; i++) {
/*
* LS: 8 (control), no bulk available
* FS: 64 (control), 64 (bulk)
* HS: 64 (control), 512 (bulk)
* TODO: switch depending on speed.
*/
int mps = i == 0 ? 64 : 512;
if (init) {
endpoints[i][0].state = 0;
wakeup_init(&endpoints[i][0].complete);
if (i != 2) { /* Skip the OUT EP0 alias */
endpoints[i][1].state = 0;
wakeup_init(&endpoints[i][1].complete);
USB_OEP_SUP_PTR(i) = 0;
}
}
dma_desc_init(i, 0);
USB_IEP_CTRL (i) = USB_EP_CTRL_FLUSH|USB_EP_CTRL_SNAK;
USB_IEP_MPS (i) = mps;
/* We don't care about the 'IN token received' event */
USB_IEP_STS_MASK(i) = USB_EP_STAT_IN; /* OF: 0x840 */
USB_IEP_TXFSIZE (i) = mps/2;
USB_IEP_STS (i) = 0xffffffff; /* clear status */
USB_IEP_DESC_PTR(i) = 0;
if (i != 2) { /* Skip the OUT EP0 alias */
dma_desc_init(i, 1);
USB_OEP_CTRL (i) = USB_EP_CTRL_FLUSH|USB_EP_CTRL_SNAK;
USB_OEP_MPS (i) = (mps/2 << 23) | mps;
USB_OEP_STS_MASK(i) = 0x0000; /* OF: 0x1800 */
USB_OEP_RXFR (i) = 0; /* Always 0 in OF trace? */
USB_OEP_STS (i) = 0xffffffff; /* clear status */
USB_OEP_DESC_PTR(i) = 0;
}
}
setup_desc_init(setup_desc);
USB_OEP_SUP_PTR(0) = (int)setup_desc;
}
void usb_drv_init(void)
{
logf("usb_drv_init() !!!!\n");
usb_enable_pll();
/* length regulator: normal operation */
ascodec_write(AS3514_CVDD_DCDC3, ascodec_read(AS3514_CVDD_DCDC3) | 1<<2);
/* AHB part */
CGU_PERI |= CGU_USB_CLOCK_ENABLE;
/* reset AHB */
CCU_SRC = CCU_SRC_USB_AHB_EN;
CCU_SRL = CCU_SRL_MAGIC_NUMBER;
usb_delay(1);
CCU_SRC = CCU_SRL = 0;
USB_GPIO_CSR = USB_GPIO_TX_ENABLE_N
| USB_GPIO_TX_BIT_STUFF_EN
| USB_GPIO_XO_ON
| USB_GPIO_CLK_SEL10; /* 0x06180000; */
/* bug workaround according to linux patch */
USB_DEV_CFG = (USB_DEV_CFG & ~3) | 1; /* full speed */
/* enable soft disconnect */
USB_DEV_CTRL |= USB_DEV_CTRL_SOFT_DISCONN;
usb_phy_on();
usb_phy_suspend();
USB_DEV_CTRL |= USB_DEV_CTRL_SOFT_DISCONN;
/* We don't care about OTG or SOF events */
/* Right now we don't handle suspend or reset, so mask those too */
USB_DEV_INTR_MASK = USB_DEV_INTR_OTG |
USB_DEV_INTR_SOF |
USB_DEV_INTR_USB_SUSPEND |
USB_DEV_INTR_EARLY_SUSPEND;
USB_DEV_CFG = USB_DEV_CFG_STAT_ACK |
USB_DEV_CFG_UNI_DIR |
USB_DEV_CFG_PI_16BIT |
USB_DEV_CFG_HS |
USB_DEV_CFG_SELF_POWERED |
0x20200;
USB_DEV_CTRL = USB_DEV_CTRL_BLEN_1DWORD |
USB_DEV_CTRL_DESC_UPDATE |
USB_DEV_CTRL_THRES_ENABLE |
USB_DEV_CTRL_RDE |
0x04000000;
USB_DEV_EP_INTR_MASK &= ~((1<<0) | (1<<16)); /* ep 0 */
reset_endpoints(1);
/* clear pending interrupts */
USB_DEV_EP_INTR = 0xffffffff;
USB_DEV_INTR = 0xffffffff;
VIC_INT_ENABLE = INTERRUPT_USB;
usb_phy_resume();
USB_DEV_CTRL &= ~USB_DEV_CTRL_SOFT_DISCONN;
USB_GPIO_CSR = USB_GPIO_TX_ENABLE_N
| USB_GPIO_TX_BIT_STUFF_EN
| USB_GPIO_XO_ON
| USB_GPIO_HS_INTR
| USB_GPIO_CLK_SEL10; /* 0x06180000; */
}
void usb_drv_exit(void)
{
USB_DEV_CTRL |= (1<<10); /* soft disconnect */
VIC_INT_EN_CLEAR = INTERRUPT_USB;
CGU_USB &= ~(1<<5);
CGU_PERI &= ~CGU_USB_CLOCK_ENABLE;
/* Disable UVDD generating LDO */
ascodec_write(AS3515_USB_UTIL, ascodec_read(AS3515_USB_UTIL) & ~(1<<4));
usb_disable_pll();
logf("usb_drv_exit() !!!!\n");
}
int usb_drv_port_speed(void)
{
return (USB_DEV_STS & USB_DEV_STS_MASK_SPD) ? 0 : 1;
}
int usb_drv_request_endpoint(int type, int dir)
{
int d = dir == USB_DIR_IN ? 0 : 1;
int i = 1; /* skip the control EP */
for(; i < USB_NUM_EPS; i++) {
if (endpoints[i][d].state & EP_STATE_ALLOCATED)
continue;
endpoints[i][d].state |= EP_STATE_ALLOCATED;
if (dir == USB_DIR_IN) {
USB_IEP_CTRL(i) = USB_EP_CTRL_FLUSH |
USB_EP_CTRL_SNAK |
USB_EP_CTRL_ACT |
(type << 4);
USB_DEV_EP_INTR_MASK &= ~(1<<i);
} else {
USB_OEP_CTRL(i) = USB_EP_CTRL_FLUSH |
USB_EP_CTRL_SNAK |
USB_EP_CTRL_ACT |
(type << 4);
USB_DEV_EP_INTR_MASK &= ~(1<<(16+i));
}
/* logf("usb_drv_request_endpoint(%d, %d): returning %02x\n", type, dir, i | dir); */
return i | dir;
}
logf("usb_drv_request_endpoint(%d, %d): no free endpoint found\n", type, dir);
return -1;
}
void usb_drv_release_endpoint(int ep)
{
int i = ep & 0x7f;
int d = ep & USB_DIR_IN ? 0 : 1;
if (i >= USB_NUM_EPS)
return;
/*
* Check for control EP and ignore it.
* Unfortunately the usb core calls
* usb_drv_release_endpoint() for ep=0..(USB_NUM_ENDPOINTS-1),
* but doesn't request a new control EP after that...
*/
if (i == 0 || /* Don't mask control EP */
(i == 2 && d == 1)) /* See reset_endpoints(), EP2_OUT == EP0_OUT */
return;
if (!(endpoints[i][d].state & EP_STATE_ALLOCATED))
return;
/* logf("usb_drv_release_endpoint(%d, %d)\n", i, d); */
endpoints[i][d].state = 0;
USB_DEV_EP_INTR_MASK |= (1<<(16*d+i));
USB_EP_CTRL(i, !d) = USB_EP_CTRL_FLUSH | USB_EP_CTRL_SNAK;
}
void usb_drv_cancel_all_transfers(void)
{
logf("usb_drv_cancel_all_transfers()\n");
return;
int flags = disable_irq_save();
reset_endpoints(0);
restore_irq(flags);
}
int usb_drv_recv(int ep, void *ptr, int len)
{
struct usb_dev_dma_desc *uc_desc = endpoints[ep][1].uc_desc;
ep &= 0x7f;
logf("usb_drv_recv(%d,%x,%d)\n", ep, (int)ptr, len);
if ((int)ptr & 31) {
logf("addr %08x not aligned!\n", (int)ptr);
}
endpoints[ep][1].state |= EP_STATE_BUSY;
endpoints[ep][1].len = len;
endpoints[ep][1].rc = -1;
/* remove data buffer from cache */
invalidate_dcache();
/* DMA setup */
uc_desc->status = USB_DMA_DESC_BS_HST_RDY |
USB_DMA_DESC_LAST |
len;
if (len == 0) {
uc_desc->status |= USB_DMA_DESC_ZERO_LEN;
uc_desc->data_ptr = 0;
} else {
uc_desc->data_ptr = ptr;
}
USB_OEP_DESC_PTR(ep) = (int)&dmadescs[ep][1];
USB_OEP_STS(ep) = USB_EP_STAT_OUT_RCVD; /* clear status */
USB_OEP_CTRL(ep) |= USB_EP_CTRL_CNAK;
return 0;
}
#if defined(LOGF_ENABLE)
static char hexbuf[1025];
static char hextab[16] = "0123456789abcdef";
char *make_hex(char *data, int len)
{
int i;
if (!((int)data & 0x40000000))
data = AS3525_UNCACHED_ADDR(data); /* don't pollute the cache */
if (len > 512)
len = 512;
for (i=0; i<len; i++) {
hexbuf[2*i ] = hextab[(unsigned char)data[i] >> 4 ];
hexbuf[2*i+1] = hextab[(unsigned char)data[i] & 0xf];
}
hexbuf[2*i] = 0;
return hexbuf;
}
#endif
void ep_send(int ep, void *ptr, int len)
{
struct usb_dev_dma_desc *uc_desc = endpoints[ep][0].uc_desc;
int i;
endpoints[ep][0].state |= EP_STATE_BUSY;
endpoints[ep][0].len = len;
endpoints[ep][0].rc = -1;
/* Make sure data is committed to memory */
clean_dcache();
logf("xx%s\n", make_hex(ptr, len));
uc_desc->status = USB_DMA_DESC_BS_HST_RDY |
USB_DMA_DESC_LAST |
len;
if (len == 0)
uc_desc->status |= USB_DMA_DESC_ZERO_LEN;
uc_desc->data_ptr = ptr;
USB_IEP_DESC_PTR(ep) = (int)&dmadescs[ep][0];
USB_IEP_STS(ep) = 0xffffffff; /* clear status */
/* start transfer */
USB_IEP_CTRL(ep) |= USB_EP_CTRL_CNAK | USB_EP_CTRL_PD;
/* HW automatically sets NAK bit later */
}
int usb_drv_send(int ep, void *ptr, int len)
{
logf("usb_drv_send(%d,%x,%d): ", ep, (int)ptr, len);
ep &= 0x7f;
ep_send(ep, ptr, len);
while (endpoints[ep][0].state & EP_STATE_BUSY)
wakeup_wait(&endpoints[ep][0].complete, TIMEOUT_BLOCK);
return endpoints[ep][0].rc;
}
int usb_drv_send_nonblocking(int ep, void *ptr, int len)
{
logf("usb_drv_send_nonblocking(%d,%x,%d): ", ep, (int)ptr, len);
ep &= 0x7f;
endpoints[ep][0].state |= EP_STATE_ASYNC;
ep_send(ep, ptr, len);
return 0;
}
static void handle_in_ep(int ep)
{
int ep_sts = USB_IEP_STS(ep) & ~USB_IEP_STS_MASK(ep);
if (ep > 3)
panicf("in_ep > 3?!");
USB_IEP_STS(ep) = ep_sts; /* ack */
if (ep_sts & USB_EP_STAT_BNA) { /* Buffer was not set up */
logf("ep%d IN, status %x (BNA)\n", ep, ep_sts);
panicf("ep%d IN 0x%x (BNA)", ep, ep_sts);
}
if (ep_sts & USB_EP_STAT_TDC) {
USB_IEP_CTRL(ep) |= USB_EP_CTRL_FLUSH;
endpoints[ep][0].state &= ~EP_STATE_BUSY;
endpoints[ep][0].rc = 0;
logf("EP%d %x %stx done len %x stat %08x\n",
ep, ep_sts, endpoints[ep][0].state & EP_STATE_ASYNC ? "async " :"",
endpoints[ep][0].len,
endpoints[ep][0].uc_desc->status);
if (endpoints[ep][0].state & EP_STATE_ASYNC) {
endpoints[ep][0].state &= ~EP_STATE_ASYNC;
usb_core_transfer_complete(ep, USB_DIR_IN, 0, endpoints[ep][0].len);
} else {
wakeup_signal(&endpoints[ep][0].complete);
}
ep_sts &= ~USB_EP_STAT_TDC;
}
if (ep_sts) {
logf("ep%d IN, hwstat %lx, epstat %x\n", ep, USB_IEP_STS(ep), endpoints[ep][0].state);
panicf("ep%d IN 0x%x", ep, ep_sts);
}
/* HW automatically disables RDE, re-enable it */
/* But this an IN ep, I wonder... */
USB_DEV_CTRL |= USB_DEV_CTRL_RDE;
}
static void handle_out_ep(int ep)
{
struct usb_ctrlrequest *req = (void*)AS3525_UNCACHED_ADDR(&setup_desc->data1);
int ep_sts = USB_OEP_STS(ep) & ~USB_OEP_STS_MASK(ep);
struct usb_dev_dma_desc *uc_desc = endpoints[ep][1].uc_desc;
if (ep > 3)
panicf("out_ep > 3!?");
USB_OEP_STS(ep) = ep_sts; /* ACK */
if (ep_sts & USB_EP_STAT_BNA) { /* Buffer was not set up */
logf("ep%d OUT, status %x (BNA)\n", ep, ep_sts);
panicf("ep%d OUT 0x%x (BNA)", ep, ep_sts);
}
if (ep_sts & USB_EP_STAT_OUT_RCVD) {
int dma_sts = uc_desc->status;
int dma_len = dma_sts & 0xffff;
int dma_frm = (dma_sts >> 16) & 0x7ff;
int dma_mst = dma_sts & 0xf8000000;
if (!(dma_sts & USB_DMA_DESC_ZERO_LEN)) {
logf("EP%d OUT token, st:%08x len:%d frm:%x data=%s epstate=%d\n", ep,
dma_mst, dma_len, dma_frm, make_hex(uc_desc->data_ptr, dma_len),
endpoints[ep][1].state);
/*
* If parts of the just dmaed range are in cache, dump them now.
*/
dump_dcache_range(uc_desc->data_ptr, dma_len);
} else{
logf("EP%d OUT token, st:%08x frm:%x (no data)\n", ep,
dma_mst, dma_frm);
}
if (endpoints[ep][1].state & EP_STATE_BUSY) {
endpoints[ep][1].state &= ~EP_STATE_BUSY;
endpoints[ep][1].rc = 0;
usb_core_transfer_complete(ep, USB_DIR_OUT, 0, dma_len);
} else {
logf("EP%d OUT, but no one was listening?\n", ep);
}
USB_OEP_CTRL(ep) |= USB_EP_CTRL_SNAK; /* make sure NAK is set */
ep_sts &= ~USB_EP_STAT_OUT_RCVD;
}
if (ep_sts & USB_EP_STAT_SETUP_RCVD) {
static struct usb_ctrlrequest req_copy;
req_copy = *req;
logf("t%ld:got SETUP packet: type=%d req=%d val=%d ind=%d len=%d\n",
current_tick,
req->bRequestType,
req->bRequest,
req->wValue,
req->wIndex,
req->wLength);
usb_core_control_request(&req_copy);
setup_desc_init(setup_desc);
ep_sts &= ~USB_EP_STAT_SETUP_RCVD;
}
if (ep_sts) {
logf("ep%d OUT, status %x\n", ep, ep_sts);
panicf("ep%d OUT 0x%x", ep, ep_sts);
}
/* HW automatically disables RDE, re-enable it */
/* THEORY: Because we only set up one DMA buffer... */
USB_DEV_CTRL |= USB_DEV_CTRL_RDE;
}
/* interrupt service routine */
void INT_USB(void)
{
int ep = USB_DEV_EP_INTR & ~USB_DEV_EP_INTR_MASK;
int intr = USB_DEV_INTR & ~USB_DEV_INTR_MASK;
/* ACK interrupt sources */
USB_DEV_EP_INTR = ep;
USB_DEV_INTR = intr;
/* Handle endpoint interrupts */
while (ep) {
int onebit = 31-__builtin_clz(ep);
if (onebit < 16) handle_in_ep(onebit);
else handle_out_ep(onebit-16);
ep &= ~(1 << onebit);
}
/* Handle general device interrupts */
if (intr) {
if (intr & USB_DEV_INTR_SET_INTERFACE) {/* SET_INTERFACE received */
logf("set interface\n");
panicf("set interface");
intr &= ~USB_DEV_INTR_SET_INTERFACE;
}
if (intr & USB_DEV_INTR_SET_CONFIG) {/* SET_CONFIGURATION received */
/*
* This is handled in HW, we have to fake a request here
* for usb_core.
*/
static struct usb_ctrlrequest set_config = {
bRequestType: USB_TYPE_STANDARD | USB_RECIP_DEVICE,
bRequest: USB_REQ_SET_CONFIGURATION,
wValue: 0,
wIndex: 0,
wLength: 0,
};
logf("set config\n");
set_config.wValue = USB_DEV_STS & USB_DEV_STS_MASK_CFG;
usb_core_control_request(&set_config);
/* Tell the HW we handled the request */
USB_DEV_CTRL |= USB_DEV_CTRL_APCSR_DONE;
intr &= ~USB_DEV_INTR_SET_CONFIG;
}
if (intr & USB_DEV_INTR_EARLY_SUSPEND) {/* idle >3ms detected */
logf("usb idle\n");
intr &= ~USB_DEV_INTR_EARLY_SUSPEND;
}
if (intr & USB_DEV_INTR_USB_RESET) {/* usb reset from host? */
logf("usb reset\n");
reset_endpoints(1);
usb_core_bus_reset();
intr &= ~USB_DEV_INTR_USB_RESET;
}
if (intr & USB_DEV_INTR_USB_SUSPEND) {/* suspend req from host? */
logf("usb suspend\n");
intr &= ~USB_DEV_INTR_USB_SUSPEND;
}
if (intr & USB_DEV_INTR_SOF) {/* sof received */
logf("sof\n");
intr &= ~USB_DEV_INTR_SOF;
}
if (intr & USB_DEV_INTR_ENUM_DONE) {/* speed enumeration complete */
int spd = USB_DEV_STS & USB_DEV_STS_MASK_SPD; /* Enumerated Speed */
logf("speed enum complete: ");
if (spd == USB_DEV_STS_SPD_HS) logf("hs\n");
if (spd == USB_DEV_STS_SPD_FS) logf("fs\n");
if (spd == USB_DEV_STS_SPD_LS) logf("ls\n");
USB_PHY_EP0_INFO = 0x00200000;
USB_DEV_CTRL |= USB_DEV_CTRL_APCSR_DONE;
USB_IEP_CTRL(0) |= USB_EP_CTRL_ACT;
USB_OEP_CTRL(0) |= USB_EP_CTRL_ACT;
intr &= ~USB_DEV_INTR_ENUM_DONE;
}
if (intr & USB_DEV_INTR_BUSERR) {
panicf("usb dma bus error");
intr &= ~USB_DEV_INTR_BUSERR;
}
if (intr)
panicf("usb devirq 0x%x", intr);
}
if (!(USB_DEV_CTRL & USB_DEV_CTRL_RDE)){
logf("re-enabling receive DMA\n");
USB_DEV_CTRL |= USB_DEV_CTRL_RDE;
}
}
/* (not essential? , not implemented in usb-tcc.c) */
void usb_drv_set_test_mode(int mode)
{
(void)mode;
}
/* handled internally by controller */
void usb_drv_set_address(int address)
{
(void)address;
}
void usb_drv_stall(int ep, bool stall, bool in)
{
if (stall) USB_EP_CTRL(ep, in) |= USB_EP_CTRL_STALL;
else USB_EP_CTRL(ep, in) &= ~USB_EP_CTRL_STALL;
}
bool usb_drv_stalled(int ep, bool in)
{
return USB_EP_CTRL(ep, in) & USB_EP_CTRL_STALL ? true : false;
}
#else
void usb_attach(void)
{
}
void usb_drv_init(void)
{
}
void usb_drv_exit(void)
{
}
int usb_drv_port_speed(void)
{
return 0;
}
int usb_drv_request_endpoint(int type, int dir)
{
(void)type;
(void)dir;
return -1;
}
void usb_drv_release_endpoint(int ep)
{
(void)ep;
}
void usb_drv_cancel_all_transfers(void)
{
}
void usb_drv_set_test_mode(int mode)
{
(void)mode;
}
void usb_drv_set_address(int address)
{
(void)address;
}
int usb_drv_recv(int ep, void *ptr, int len)
{
(void)ep;
(void)ptr;
(void)len;
return -1;
}
int usb_drv_send(int ep, void *ptr, int len)
{
(void)ep;
(void)ptr;
(void)len;
return -1;
}
int usb_drv_send_nonblocking(int ep, void *ptr, int len)
{
(void)ep;
(void)ptr;
(void)len;
return -1;
}
void usb_drv_stall(int ep, bool stall, bool in)
{
(void)ep;
(void)stall;
(void)in;
}
bool usb_drv_stalled(int ep, bool in)
{
(void)ep;
(void)in;
return 0;
}
#endif
Reference in a new issue View git blame Copy permalink