f0a96580ae
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23057 a1c6a512-1295-4272-9138-f99709370657
759 lines
20 KiB
C
759 lines
20 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2008 by Maurus Cuelenaere
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#include "config.h"
|
|
#include "jz4740.h"
|
|
#include "ata.h"
|
|
//#include "ata-nand-target.h" /* TODO */
|
|
#include "nand_id.h"
|
|
#include "system.h"
|
|
#include "panic.h"
|
|
#include "kernel.h"
|
|
#include "storage.h"
|
|
#include "buffer.h"
|
|
#include "string.h"
|
|
//#define LOGF_ENABLE
|
|
#include "logf.h"
|
|
|
|
//#define USE_DMA
|
|
//#define USE_ECC
|
|
|
|
/*
|
|
* Standard NAND flash commands
|
|
*/
|
|
#define NAND_CMD_READ0 0
|
|
#define NAND_CMD_READ1 1
|
|
#define NAND_CMD_RNDOUT 5
|
|
#define NAND_CMD_PAGEPROG 0x10
|
|
#define NAND_CMD_READOOB 0x50
|
|
#define NAND_CMD_ERASE1 0x60
|
|
#define NAND_CMD_STATUS 0x70
|
|
#define NAND_CMD_STATUS_MULTI 0x71
|
|
#define NAND_CMD_SEQIN 0x80
|
|
#define NAND_CMD_RNDIN 0x85
|
|
#define NAND_CMD_READID 0x90
|
|
#define NAND_CMD_ERASE2 0xd0
|
|
#define NAND_CMD_RESET 0xff
|
|
|
|
/* Extended commands for large page devices */
|
|
#define NAND_CMD_READSTART 0x30
|
|
#define NAND_CMD_RNDOUTSTART 0xE0
|
|
#define NAND_CMD_CACHEDPROG 0x15
|
|
|
|
/* Status bits */
|
|
#define NAND_STATUS_FAIL 0x01
|
|
#define NAND_STATUS_FAIL_N1 0x02
|
|
#define NAND_STATUS_TRUE_READY 0x20
|
|
#define NAND_STATUS_READY 0x40
|
|
#define NAND_STATUS_WP 0x80
|
|
|
|
/*
|
|
* NAND parameter struct
|
|
*/
|
|
struct nand_param
|
|
{
|
|
unsigned int bus_width; /* data bus width: 8-bit/16-bit */
|
|
unsigned int row_cycle; /* row address cycles: 2/3 */
|
|
unsigned int page_size; /* page size in bytes: 512/2048/4096 */
|
|
unsigned int oob_size; /* oob size in bytes: 16/64/128 */
|
|
unsigned int page_per_block; /* pages per block: 32/64/128 */
|
|
};
|
|
|
|
/*
|
|
* jz4740_nand.c
|
|
*
|
|
* NAND read routine for JZ4740
|
|
*
|
|
* Copyright (c) 2005-2008 Ingenic Semiconductor Inc.
|
|
*
|
|
*/
|
|
|
|
static volatile unsigned long nand_address;
|
|
#define NAND_DATAPORT (nand_address)
|
|
#define NAND_ADDRPORT (nand_address+0x10000)
|
|
#define NAND_COMMPORT (nand_address+0x08000)
|
|
|
|
#define ECC_BLOCK 512
|
|
#define ECC_POS 6
|
|
#define PAR_SIZE 9
|
|
|
|
#define __nand_cmd(n) (REG8(NAND_COMMPORT) = (n))
|
|
#define __nand_addr(n) (REG8(NAND_ADDRPORT) = (n))
|
|
#define __nand_data8() (REG8(NAND_DATAPORT))
|
|
#define __nand_data16() (REG16(NAND_DATAPORT))
|
|
|
|
#define __nand_ecc_rs_encoding() \
|
|
(REG_EMC_NFECR = EMC_NFECR_ECCE | EMC_NFECR_ERST | EMC_NFECR_RS | EMC_NFECR_RS_ENCODING)
|
|
#define __nand_ecc_rs_decoding() \
|
|
(REG_EMC_NFECR = EMC_NFECR_ECCE | EMC_NFECR_ERST | EMC_NFECR_RS | EMC_NFECR_RS_DECODING)
|
|
#define __nand_ecc_disable() (REG_EMC_NFECR &= ~EMC_NFECR_ECCE)
|
|
#define __nand_ecc_encode_sync() while (!(REG_EMC_NFINTS & EMC_NFINTS_ENCF))
|
|
#define __nand_ecc_decode_sync() while (!(REG_EMC_NFINTS & EMC_NFINTS_DECF))
|
|
|
|
/*--------------------------------------------------------------*/
|
|
|
|
static struct nand_info* chip_info = NULL;
|
|
static struct nand_info* banks[4];
|
|
static unsigned int nr_banks = 1;
|
|
static unsigned long bank_size;
|
|
static struct nand_param internal_param;
|
|
static struct mutex nand_mtx;
|
|
#ifdef USE_DMA
|
|
static struct mutex nand_dma_mtx;
|
|
static struct wakeup nand_wkup;
|
|
#endif
|
|
static unsigned char temp_page[4096]; /* Max page size */
|
|
|
|
static inline void jz_nand_wait_ready(void)
|
|
{
|
|
register unsigned int timeout = 1000;
|
|
while ((REG_GPIO_PXPIN(2) & 0x40000000) && timeout--);
|
|
while (!(REG_GPIO_PXPIN(2) & 0x40000000));
|
|
}
|
|
|
|
#ifndef USE_DMA
|
|
static inline void jz_nand_read_buf16(void *buf, int count)
|
|
{
|
|
register int i;
|
|
register unsigned short *p = (unsigned short *)buf;
|
|
|
|
for (i = 0; i < count; i += 2)
|
|
*p++ = __nand_data16();
|
|
}
|
|
|
|
static inline void jz_nand_read_buf8(void *buf, int count)
|
|
{
|
|
register int i;
|
|
register unsigned char *p = (unsigned char *)buf;
|
|
|
|
for (i = 0; i < count; i++)
|
|
*p++ = __nand_data8();
|
|
}
|
|
#else
|
|
static void jz_nand_write_dma(void *source, unsigned int len, int bw)
|
|
{
|
|
mutex_lock(&nand_dma_mtx);
|
|
|
|
if(((unsigned int)source < 0xa0000000) && len)
|
|
dma_cache_wback_inv((unsigned long)source, len);
|
|
|
|
dma_enable();
|
|
|
|
REG_DMAC_DCCSR(DMA_NAND_CHANNEL) = DMAC_DCCSR_NDES;
|
|
REG_DMAC_DSAR(DMA_NAND_CHANNEL) = PHYSADDR((unsigned long)source);
|
|
REG_DMAC_DTAR(DMA_NAND_CHANNEL) = PHYSADDR((unsigned long)NAND_DATAPORT);
|
|
REG_DMAC_DTCR(DMA_NAND_CHANNEL) = len / 16;
|
|
REG_DMAC_DRSR(DMA_NAND_CHANNEL) = DMAC_DRSR_RS_AUTO;
|
|
REG_DMAC_DCMD(DMA_NAND_CHANNEL) = (DMAC_DCMD_SAI| DMAC_DCMD_DAI | DMAC_DCMD_SWDH_32 | DMAC_DCMD_DS_16BYTE |
|
|
(bw == 8 ? DMAC_DCMD_DWDH_8 : DMAC_DCMD_DWDH_16));
|
|
|
|
REG_DMAC_DCCSR(DMA_NAND_CHANNEL) |= DMAC_DCCSR_EN; /* Enable DMA channel */
|
|
#if 1
|
|
while( REG_DMAC_DTCR(DMA_NAND_CHANNEL) )
|
|
yield();
|
|
#else
|
|
REG_DMAC_DCMD(DMA_NAND_CHANNEL) |= DMAC_DCMD_TIE; /* Enable DMA interrupt */
|
|
wakeup_wait(&nand_wkup, TIMEOUT_BLOCK);
|
|
#endif
|
|
|
|
REG_DMAC_DCCSR(DMA_NAND_CHANNEL) &= ~DMAC_DCCSR_EN; /* Disable DMA channel */
|
|
|
|
dma_disable();
|
|
|
|
mutex_unlock(&nand_dma_mtx);
|
|
}
|
|
|
|
static void jz_nand_read_dma(void *target, unsigned int len, int bw)
|
|
{
|
|
mutex_lock(&nand_dma_mtx);
|
|
|
|
if(((unsigned int)target < 0xa0000000) && len)
|
|
dma_cache_wback_inv((unsigned long)target, len);
|
|
|
|
dma_enable();
|
|
|
|
REG_DMAC_DCCSR(DMA_NAND_CHANNEL) = DMAC_DCCSR_NDES ;
|
|
REG_DMAC_DSAR(DMA_NAND_CHANNEL) = PHYSADDR((unsigned long)NAND_DATAPORT);
|
|
REG_DMAC_DTAR(DMA_NAND_CHANNEL) = PHYSADDR((unsigned long)target);
|
|
REG_DMAC_DTCR(DMA_NAND_CHANNEL) = len / 4;
|
|
REG_DMAC_DRSR(DMA_NAND_CHANNEL) = DMAC_DRSR_RS_AUTO;
|
|
REG_DMAC_DCMD(DMA_NAND_CHANNEL) = (DMAC_DCMD_SAI| DMAC_DCMD_DAI | DMAC_DCMD_DWDH_32 | DMAC_DCMD_DS_32BIT |
|
|
(bw == 8 ? DMAC_DCMD_SWDH_8 : DMAC_DCMD_SWDH_16));
|
|
REG_DMAC_DCCSR(DMA_NAND_CHANNEL) |= DMAC_DCCSR_EN; /* Enable DMA channel */
|
|
#if 1
|
|
while( REG_DMAC_DTCR(DMA_NAND_CHANNEL) )
|
|
yield();
|
|
#else
|
|
REG_DMAC_DCMD(DMA_NAND_CHANNEL) |= DMAC_DCMD_TIE; /* Enable DMA interrupt */
|
|
wakeup_wait(&nand_wkup, TIMEOUT_BLOCK);
|
|
#endif
|
|
|
|
//REG_DMAC_DCCSR(DMA_NAND_CHANNEL) &= ~DMAC_DCCSR_EN; /* Disable DMA channel */
|
|
|
|
dma_disable();
|
|
|
|
mutex_unlock(&nand_dma_mtx);
|
|
}
|
|
|
|
void DMA_CALLBACK(DMA_NAND_CHANNEL)(void)
|
|
{
|
|
if (REG_DMAC_DCCSR(DMA_NAND_CHANNEL) & DMAC_DCCSR_HLT)
|
|
REG_DMAC_DCCSR(DMA_NAND_CHANNEL) &= ~DMAC_DCCSR_HLT;
|
|
|
|
if (REG_DMAC_DCCSR(DMA_NAND_CHANNEL) & DMAC_DCCSR_AR)
|
|
REG_DMAC_DCCSR(DMA_NAND_CHANNEL) &= ~DMAC_DCCSR_AR;
|
|
|
|
if (REG_DMAC_DCCSR(DMA_NAND_CHANNEL) & DMAC_DCCSR_CT)
|
|
REG_DMAC_DCCSR(DMA_NAND_CHANNEL) &= ~DMAC_DCCSR_CT;
|
|
|
|
if (REG_DMAC_DCCSR(DMA_NAND_CHANNEL) & DMAC_DCCSR_TT)
|
|
REG_DMAC_DCCSR(DMA_NAND_CHANNEL) &= ~DMAC_DCCSR_TT;
|
|
|
|
wakeup_signal(&nand_wkup);
|
|
}
|
|
#endif /* USE_DMA */
|
|
|
|
static inline void jz_nand_read_buf(void *buf, int count, int bw)
|
|
{
|
|
#ifdef USE_DMA
|
|
if (bw == 8)
|
|
jz_nand_read_dma(buf, count, 8);
|
|
else
|
|
jz_nand_read_dma(buf, count, 16);
|
|
#else
|
|
if (bw == 8)
|
|
jz_nand_read_buf8(buf, count);
|
|
else
|
|
jz_nand_read_buf16(buf, count);
|
|
#endif
|
|
}
|
|
|
|
#ifdef USE_ECC
|
|
/*
|
|
* Correct 1~9-bit errors in 512-bytes data
|
|
*/
|
|
static void jz_rs_correct(unsigned char *dat, int idx, int mask)
|
|
{
|
|
int i, j;
|
|
unsigned short d, d1, dm;
|
|
|
|
i = (idx * 9) >> 3;
|
|
j = (idx * 9) & 0x7;
|
|
|
|
i = (j == 0) ? (i - 1) : i;
|
|
j = (j == 0) ? 7 : (j - 1);
|
|
|
|
if (i > 512)
|
|
return;
|
|
|
|
if (i == 512)
|
|
d = dat[i - 1];
|
|
else
|
|
d = (dat[i] << 8) | dat[i - 1];
|
|
|
|
d1 = (d >> j) & 0x1ff;
|
|
d1 ^= mask;
|
|
|
|
dm = ~(0x1ff << j);
|
|
d = (d & dm) | (d1 << j);
|
|
|
|
dat[i - 1] = d & 0xff;
|
|
if (i < 512)
|
|
dat[i] = (d >> 8) & 0xff;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Read oob
|
|
*/
|
|
static int jz_nand_read_oob(unsigned long page_addr, unsigned char *buf, int size)
|
|
{
|
|
struct nand_param *nandp = &internal_param;
|
|
int page_size, row_cycle, bus_width;
|
|
int col_addr;
|
|
|
|
page_size = nandp->page_size;
|
|
row_cycle = nandp->row_cycle;
|
|
bus_width = nandp->bus_width;
|
|
|
|
if (page_size >= 2048)
|
|
col_addr = page_size;
|
|
else
|
|
col_addr = 0;
|
|
|
|
if (page_size >= 2048)
|
|
/* Send READ0 command */
|
|
__nand_cmd(NAND_CMD_READ0);
|
|
else
|
|
/* Send READOOB command */
|
|
__nand_cmd(NAND_CMD_READOOB);
|
|
|
|
/* Send column address */
|
|
__nand_addr(col_addr & 0xff);
|
|
if (page_size >= 2048)
|
|
__nand_addr((col_addr >> 8) & 0xff);
|
|
|
|
/* Send page address */
|
|
__nand_addr(page_addr & 0xff);
|
|
__nand_addr((page_addr >> 8) & 0xff);
|
|
if (row_cycle == 3)
|
|
__nand_addr((page_addr >> 16) & 0xff);
|
|
|
|
/* Send READSTART command for 2048 ps NAND */
|
|
if (page_size >= 2048)
|
|
__nand_cmd(NAND_CMD_READSTART);
|
|
|
|
/* Wait for device ready */
|
|
jz_nand_wait_ready();
|
|
|
|
/* Read oob data */
|
|
jz_nand_read_buf(buf, size, bus_width);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* nand_read_page()
|
|
*
|
|
* Input:
|
|
*
|
|
* block - block number: 0, 1, 2, ...
|
|
* page - page number within a block: 0, 1, 2, ...
|
|
* dst - pointer to target buffer
|
|
*/
|
|
static int jz_nand_read_page(unsigned long page_addr, unsigned char *dst)
|
|
{
|
|
struct nand_param *nandp = &internal_param;
|
|
int page_size, oob_size, page_per_block;
|
|
int row_cycle, bus_width, ecc_count;
|
|
int i;
|
|
#ifdef USE_ECC
|
|
int j;
|
|
#endif
|
|
unsigned char *data_buf;
|
|
unsigned char oob_buf[nandp->oob_size];
|
|
|
|
if(nand_address == 0)
|
|
return -1;
|
|
|
|
page_size = nandp->page_size;
|
|
oob_size = nandp->oob_size;
|
|
page_per_block = nandp->page_per_block;
|
|
row_cycle = nandp->row_cycle;
|
|
bus_width = nandp->bus_width;
|
|
|
|
/*
|
|
* Read oob data
|
|
*/
|
|
jz_nand_read_oob(page_addr, oob_buf, oob_size);
|
|
|
|
/*
|
|
* Read page data
|
|
*/
|
|
|
|
/* Send READ0 command */
|
|
__nand_cmd(NAND_CMD_READ0);
|
|
|
|
/* Send column address */
|
|
__nand_addr(0);
|
|
if (page_size >= 2048)
|
|
__nand_addr(0);
|
|
|
|
/* Send page address */
|
|
__nand_addr(page_addr & 0xff);
|
|
__nand_addr((page_addr >> 8) & 0xff);
|
|
if (row_cycle >= 3)
|
|
__nand_addr((page_addr >> 16) & 0xff);
|
|
|
|
/* Send READSTART command for 2048 ps NAND */
|
|
if (page_size >= 2048)
|
|
__nand_cmd(NAND_CMD_READSTART);
|
|
|
|
/* Wait for device ready */
|
|
jz_nand_wait_ready();
|
|
|
|
/* Read page data */
|
|
data_buf = dst;
|
|
|
|
ecc_count = page_size / ECC_BLOCK;
|
|
|
|
for (i = 0; i < ecc_count; i++)
|
|
{
|
|
#ifdef USE_ECC
|
|
volatile unsigned char *paraddr = (volatile unsigned char *)EMC_NFPAR0;
|
|
unsigned int stat;
|
|
|
|
/* Enable RS decoding */
|
|
REG_EMC_NFINTS = 0x0;
|
|
__nand_ecc_rs_decoding();
|
|
#endif
|
|
|
|
/* Read data */
|
|
jz_nand_read_buf((void *)data_buf, ECC_BLOCK, bus_width);
|
|
|
|
#ifdef USE_ECC
|
|
/* Set PAR values */
|
|
for (j = 0; j < PAR_SIZE; j++)
|
|
*paraddr++ = oob_buf[ECC_POS + i*PAR_SIZE + j];
|
|
|
|
/* Set PRDY */
|
|
REG_EMC_NFECR |= EMC_NFECR_PRDY;
|
|
|
|
/* Wait for completion */
|
|
__nand_ecc_decode_sync();
|
|
|
|
/* Disable decoding */
|
|
__nand_ecc_disable();
|
|
|
|
/* Check result of decoding */
|
|
stat = REG_EMC_NFINTS;
|
|
if (stat & EMC_NFINTS_ERR)
|
|
{
|
|
/* Error occurred */
|
|
if (stat & EMC_NFINTS_UNCOR)
|
|
{
|
|
/* Uncorrectable error occurred */
|
|
logf("Uncorrectable ECC error at NAND page address 0x%lx", page_addr);
|
|
return -1;
|
|
}
|
|
else
|
|
{
|
|
unsigned int errcnt, index, mask;
|
|
|
|
errcnt = (stat & EMC_NFINTS_ERRCNT_MASK) >> EMC_NFINTS_ERRCNT_BIT;
|
|
switch (errcnt)
|
|
{
|
|
case 4:
|
|
index = (REG_EMC_NFERR3 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT;
|
|
mask = (REG_EMC_NFERR3 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT;
|
|
jz_rs_correct(data_buf, index, mask);
|
|
case 3:
|
|
index = (REG_EMC_NFERR2 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT;
|
|
mask = (REG_EMC_NFERR2 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT;
|
|
jz_rs_correct(data_buf, index, mask);
|
|
case 2:
|
|
index = (REG_EMC_NFERR1 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT;
|
|
mask = (REG_EMC_NFERR1 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT;
|
|
jz_rs_correct(data_buf, index, mask);
|
|
case 1:
|
|
index = (REG_EMC_NFERR0 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT;
|
|
mask = (REG_EMC_NFERR0 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT;
|
|
jz_rs_correct(data_buf, index, mask);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
data_buf += ECC_BLOCK;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Disable NAND controller
|
|
*/
|
|
static void jz_nand_disable(void)
|
|
{
|
|
REG_EMC_NFCSR &= ~(EMC_NFCSR_NFCE1 | EMC_NFCSR_NFCE2 |
|
|
EMC_NFCSR_NFCE3 | EMC_NFCSR_NFCE4 |
|
|
EMC_NFCSR_NFE1 | EMC_NFCSR_NFE2 |
|
|
EMC_NFCSR_NFE3 | EMC_NFCSR_NFE4 );
|
|
}
|
|
|
|
/*
|
|
* Enable NAND controller
|
|
*/
|
|
static void jz_nand_enable(void)
|
|
{
|
|
#if 0
|
|
/* OF RE */
|
|
REG_GPIO_PXFUNS(1) = 0x1E018000; // __gpio_as_func0() start
|
|
REG_GPIO_PXSELC(1) = 0x1E018000; // __gpio_as_func0() end
|
|
|
|
REG_GPIO_PXFUNS(2) = 0x3000<<16; // __gpio_as_func0() start
|
|
REG_GPIO_PXSELC(2) = 0x3000<<16; // __gpio_as_func0() end
|
|
|
|
REG_GPIO_PXFUNC(2) = 0x4000<<16; // __gpio_port_as_input() start
|
|
REG_GPIO_PXSELC(2) = 0x4000<<16;
|
|
REG_GPIO_PXDIRC(2) = 0x4000<<16; // __gpio_port_as_input() end
|
|
REG_GPIO_PXPES(2) = 0x4000<<16; // __gpio_disable_pull()
|
|
|
|
REG_GPIO_PXFUNS(1) = 0x40<<16; // __gpio_as_func0() start
|
|
REG_GPIO_PXSELC(1) = 0x40<<16; // __gpio_as_func0() end
|
|
|
|
REG_EMC_SMCR1 = (REG_EMC_SMCR1 & 0xFF) | 0x4621200;
|
|
REG_EMC_SMCR2 = (REG_EMC_SMCR2 & 0xFF) | 0x4621200;
|
|
REG_EMC_SMCR3 = (REG_EMC_SMCR3 & 0xFF) | 0x4621200;
|
|
REG_EMC_SMCR4 = (REG_EMC_SMCR4 & 0xFF) | 0x4621200;
|
|
|
|
REG_EMC_SMCR1 = REG_EMC_SMCR2 = REG_EMC_SMCR3 = REG_EMC_SMCR4 = 0x6621200;
|
|
#else
|
|
REG_EMC_SMCR1 = REG_EMC_SMCR2 = REG_EMC_SMCR3 = REG_EMC_SMCR4 = 0x04444400;
|
|
#endif
|
|
}
|
|
|
|
static void jz_nand_select(int bank)
|
|
{
|
|
REG_EMC_NFCSR |= (EMC_NFCSR_NFE(bank+1) | EMC_NFCSR_NFCE(bank+1));
|
|
|
|
switch(bank)
|
|
{
|
|
case 0:
|
|
nand_address = 0xB8000000;
|
|
break;
|
|
case 1:
|
|
nand_address = 0xB4000000;
|
|
break;
|
|
case 2:
|
|
nand_address = 0xAC000000;
|
|
break;
|
|
case 3:
|
|
nand_address = 0xA8000000;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void jz_nand_deselect(int bank)
|
|
{
|
|
REG_EMC_NFCSR &= ~(EMC_NFCSR_NFE(bank+1) | EMC_NFCSR_NFCE(bank+1));
|
|
nand_address = 0;
|
|
}
|
|
|
|
static int jz_nand_init(void)
|
|
{
|
|
unsigned char cData[5];
|
|
int i;
|
|
|
|
jz_nand_enable();
|
|
|
|
for(i=0; i<4; i++)
|
|
{
|
|
jz_nand_select(i);
|
|
|
|
__nand_cmd(NAND_CMD_READID);
|
|
__nand_addr(NAND_CMD_READ0);
|
|
cData[0] = __nand_data8();
|
|
cData[1] = __nand_data8();
|
|
cData[2] = __nand_data8();
|
|
cData[3] = __nand_data8();
|
|
cData[4] = __nand_data8();
|
|
|
|
jz_nand_deselect(i);
|
|
|
|
logf("NAND chip %d: 0x%x 0x%x 0x%x 0x%x 0x%x", i+1, cData[0], cData[1],
|
|
cData[2], cData[3], cData[4]);
|
|
|
|
banks[i] = nand_identify(cData);
|
|
|
|
if(banks[i] != NULL)
|
|
nr_banks++;
|
|
|
|
if(i == 0 && banks[i] == NULL)
|
|
{
|
|
panicf("Unknown NAND flash chip: 0x%x 0x%x 0x%x 0x%x 0x%x", cData[0],
|
|
cData[1], cData[2], cData[3], cData[4]);
|
|
return -1; /* panicf() doesn't return though */
|
|
}
|
|
}
|
|
chip_info = banks[0];
|
|
|
|
internal_param.bus_width = 8;
|
|
internal_param.row_cycle = chip_info->row_cycles;
|
|
internal_param.page_size = chip_info->page_size;
|
|
internal_param.oob_size = chip_info->spare_size;
|
|
internal_param.page_per_block = chip_info->pages_per_block;
|
|
|
|
bank_size = chip_info->page_size * chip_info->blocks_per_bank / 512 * chip_info->pages_per_block;
|
|
|
|
jz_nand_disable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int nand_init(void)
|
|
{
|
|
int res = 0;
|
|
static bool inited = false;
|
|
|
|
if(!inited)
|
|
{
|
|
res = jz_nand_init();
|
|
mutex_init(&nand_mtx);
|
|
#ifdef USE_DMA
|
|
mutex_init(&nand_dma_mtx);
|
|
wakeup_init(&nand_wkup);
|
|
system_enable_irq(DMA_IRQ(DMA_NAND_CHANNEL));
|
|
#endif
|
|
|
|
inited = true;
|
|
}
|
|
|
|
return res;
|
|
}
|
|
|
|
static inline int read_sector(unsigned long start, unsigned int count,
|
|
void* buf, unsigned int chip_size)
|
|
{
|
|
register int ret;
|
|
|
|
if(UNLIKELY(start % chip_size == 0 && count == chip_size))
|
|
ret = jz_nand_read_page(start / chip_size, buf);
|
|
else
|
|
{
|
|
ret = jz_nand_read_page(start / chip_size, temp_page);
|
|
memcpy(buf, temp_page + (start % chip_size), count);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int nand_read_sectors(IF_MV2(int drive,) unsigned long start, int count, void* buf)
|
|
{
|
|
#ifdef HAVE_MULTIVOLUME
|
|
(void)drive;
|
|
#endif
|
|
int ret = 0;
|
|
unsigned int i, _count, chip_size = chip_info->page_size;
|
|
unsigned long _start;
|
|
|
|
logf("start");
|
|
mutex_lock(&nand_mtx);
|
|
|
|
_start = start << 9;
|
|
_count = count << 9;
|
|
|
|
if(_count <= chip_size)
|
|
{
|
|
jz_nand_select(start / bank_size);
|
|
ret = read_sector(_start, _count, buf, chip_size);
|
|
jz_nand_deselect(start / bank_size);
|
|
}
|
|
else
|
|
{
|
|
for(i=0; i<_count && ret==0; i+=chip_size)
|
|
{
|
|
jz_nand_select((start+(i>>9)) / bank_size);
|
|
|
|
ret = read_sector(_start+i, (_count-i < chip_size ?
|
|
_count-i : chip_size),
|
|
buf+i, chip_size);
|
|
|
|
jz_nand_deselect((start+(i>>9)) / bank_size);
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&nand_mtx);
|
|
|
|
logf("nand_read_sectors(%ld, %d, 0x%x): %d", start, count, (int)buf, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* TODO */
|
|
int nand_write_sectors(IF_MV2(int drive,) unsigned long start, int count, const void* buf)
|
|
{
|
|
(void)start;
|
|
(void)count;
|
|
(void)buf;
|
|
#ifdef HAVE_MULTIVOLUME
|
|
(void)drive;
|
|
#endif
|
|
|
|
return -1;
|
|
}
|
|
|
|
#ifdef HAVE_STORAGE_FLUSH
|
|
int nand_flush(void)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
void nand_spindown(int seconds)
|
|
{
|
|
/* null */
|
|
(void)seconds;
|
|
}
|
|
|
|
void nand_sleep(void)
|
|
{
|
|
/* null */
|
|
}
|
|
|
|
void nand_spin(void)
|
|
{
|
|
/* null */
|
|
}
|
|
|
|
void nand_enable(bool on)
|
|
{
|
|
/* null - flash controller is enabled/disabled as needed. */
|
|
(void)on;
|
|
}
|
|
|
|
/* TODO */
|
|
long nand_last_disk_activity(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int nand_spinup_time(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
void nand_sleepnow(void)
|
|
{
|
|
}
|
|
|
|
#ifdef STORAGE_GET_INFO
|
|
void nand_get_info(IF_MV2(int drive,) struct storage_info *info)
|
|
{
|
|
#ifdef HAVE_MULTIVOLUME
|
|
(void)drive;
|
|
#endif
|
|
|
|
/* firmware version */
|
|
info->revision="0.00";
|
|
|
|
info->vendor="Rockbox";
|
|
info->product="NAND Storage";
|
|
|
|
/* blocks count */
|
|
info->num_sectors = bank_size * nr_banks;
|
|
info->sector_size = 512;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_STORAGE_MULTI
|
|
int nand_num_drives(int first_drive)
|
|
{
|
|
/* We don't care which logical drive number(s) we have been assigned */
|
|
(void)first_drive;
|
|
|
|
return 1;
|
|
}
|
|
#endif
|