rockbox/firmware/target/arm/s3c2440/gigabeat-fx
Michael Sevakis d25dc33453 Oops. mvn is one's-complement, not two's. Correct the YUV calculation.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14184 a1c6a512-1295-4272-9138-f99709370657
2007-08-04 20:36:22 +00:00
..
adc-meg-fx.c
adc-target.h
ata-meg-fx.c
ata-target.h
backlight-meg-fx.c Stop Gigabeat bootloader from panicing. 2007-07-29 07:41:19 +00:00
backlight-target.h
button-meg-fx.c
button-target.h add separate button defines for the Gigabeat remote control 2007-05-20 11:42:04 +00:00
dma_start.c
i2c-meg-fx.c Gigabeat: Replace generic i2c driver with one that uses the CPU's builtin controller. Add some clocking registers to 'View I/O ports'. 2007-06-26 02:11:30 +00:00
i2c-meg-fx.h Gigabeat: Replace generic i2c driver with one that uses the CPU's builtin controller. Add some clocking registers to 'View I/O ports'. 2007-06-26 02:11:30 +00:00
kernel-meg-fx.c Gigabeat: Add timer functionality. Rework tick timer setup to be exactly 100Hz. Metronome should work now but some pcm changes are needed to have faster tocks work correctly (in the works). 2007-07-06 21:36:32 +00:00
lcd-as-meg-fx.S Oops. mvn is one's-complement, not two's. Correct the YUV calculation. 2007-08-04 20:36:22 +00:00
lcd-meg-fx.c Gigabeat: Add the funky foreground color support for transparent bitmaps. 2007-07-15 01:06:04 +00:00
lcd-target.h
mmu-meg-fx.c
mmu-meg-fx.h
pcm-meg-fx.c Temporary fix for FS#7257 and FS#7261 - playback resumes while paused when seeking 2007-07-05 10:19:06 +00:00
power-meg-fx.c
sc606-meg-fx.c
sc606-meg-fx.h
system-meg-fx.c Get rid of yellow plus an optimization I should have seen in the first place. 2007-07-05 08:21:10 +00:00
system-target.h
timer-meg-fx.c Gigabeat: oops, forgot to set correct timer prescaler limit. 2007-07-06 22:08:07 +00:00
timer-target.h Gigabeat: Add timer functionality. Rework tick timer setup to be exactly 100Hz. Metronome should work now but some pcm changes are needed to have faster tocks work correctly (in the works). 2007-07-06 21:36:32 +00:00
usb-meg-fx.c only go into USB mode when the cradle is powered 2007-06-23 18:25:41 +00:00
usb-target.h
wmcodec-meg-fx.c Gigabeat: Replace generic i2c driver with one that uses the CPU's builtin controller. Add some clocking registers to 'View I/O ports'. 2007-06-26 02:11:30 +00:00