Bertrik Sikken d24d885aa4 Use wrap-safe TIME_BEFORE/TIME_AFTER macros to compare times with current_time, instead of comparing them directly. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23246 a1c6a512-1295-4272-9138-f99709370657		2009-10-18 15:50:30 +00:00
..
1g2g
3g
video	fix red	2009-08-19 22:15:45 +00:00
adc-ipod-pcf.c	Use wrap-safe TIME_BEFORE/TIME_AFTER macros to compare times with current_time, instead of comparing them directly.	2009-10-18 15:50:30 +00:00
adc-target.h
app.lds	Reclaim .iram areas in DRAM by overlapping their load addresses with the uninitialized data sections. I did what I could test out-- not any flash image linker scripts or other target processors. Move any .iram copies in crt0.S's to be the first operation even if not _strictly_ necessary to be emphatic (aka. 'beware').	2009-02-20 02:33:40 +00:00
backlight-4g_color.c
backlight-mini1g_mini2g.c
backlight-nano_video.c	Submit FS#9890 by Boris Gjenero. Enabling option for iPod Video to shut down LCD and BCM (controller) after backlight was switched off. With this option the user can decide whether to keep the transflective LCD switched on (e.g. during daylight use) or to switch it off (to save power). The power saving is extreme and increases the battery runtime by far (measured >30%).	2009-02-21 11:10:50 +00:00
backlight-target.h	Submit FS#9890 by Boris Gjenero. Enabling option for iPod Video to shut down LCD and BCM (controller) after backlight was switched off. With this option the user can decide whether to keep the transflective LCD switched on (e.g. during daylight use) or to switch it off (to save power). The power saving is extreme and increases the battery runtime by far (measured >30%).	2009-02-21 11:10:50 +00:00
boot.lds	Common data must be included in .bss or it won't get zeroed in crt0. Fix the archos self-extractor as well to play safe.	2008-11-07 00:15:53 +00:00
button-1g-3g.c	Fix duplicate #includes	2009-05-17 14:50:19 +00:00
button-clickwheel.c	Fix the iPod Nano 2G clickwheel when releasing the hold switch	2009-10-12 00:12:02 +00:00
button-mini1g.c	Fix duplicate #includes	2009-05-17 14:50:19 +00:00
button-target.h	Commit FS#8624 by Linus Nielsen, Ryan Press, Craig Elliott, and Kenderes Tamas. Adds preliminary support for numerous accessories that use the ipod serial port on the dock connector. See IpodAccessories for a list of tested devices.	2008-12-25 01:46:16 +00:00
lcd-as-gray.S	ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time.	2009-07-11 23:43:44 +00:00
lcd-color_nano.c	Fix the iPod Photo/Color "type 0 LCD" bug introduced in r17715 by correctly initialising the LCD to accept big-endian data (the same format as the "type 1" LCDs). Also some tab policing. Closes FS#9122 and FS#9097	2008-07-17 10:09:12 +00:00
lcd-gray.c	Greyscale iPods: Fix the default contrast in the bootloader and the core before settings are loaded. Especially important on 1st..3rd Gen as we're setting up the LCD controller quite a bit different than the OF on those.	2008-08-15 19:19:46 +00:00
power-ipod.c	Remove unnecessary #include "adc.h"	2009-04-25 22:24:59 +00:00
powermgmt-ipod-pcf.c	Commit battery discharge curve for the Ipod Photo. We still need one for the 4G and Mini.	2009-01-18 19:36:39 +00:00