Thomas Martitz b7739fbf1c Rework lcd_enabled and lcd_set/call_enable hook ... a) lcd_enabled() is now lcd_active(), and is available for HAVE_LCD_SLEEP only targets (e.g. ipod video) too. It was depandent on HAVE_LCD_ENALE only before b) rename the hook accordingly, and implement the hook for other other targets too (e.g. the clip [the only mono target with lcd_enable/lcd_sleep yet, so the code is still in the lcd driver], ipod, fuze, c200) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20331 a1c6a512-1295-4272-9138-f99709370657		2009-03-17 02:43:47 +00:00
..
adc-imx31.c
adc-target.h
ata-imx31.c	Gigabeat S: Implement MDMA and UDMA disk access for bootloader and main binary. Add a needed SDMA API to check channel errors. Increase audio DMA channels' priority as required. Reads and writes measure faster accross all test_disk tests and especially at 4KB and 1MB.	2009-03-12 06:31:40 +00:00
ata-target.h	Gigabeat S: Implement MDMA and UDMA disk access for bootloader and main binary. Add a needed SDMA API to check channel errors. Increase audio DMA channels' priority as required. Reads and writes measure faster accross all test_disk tests and especially at 4KB and 1MB.	2009-03-12 06:31:40 +00:00
audio-gigabeat-s.c	Gigabeat S: Switch SSI1 and 2 around so that playback can use the shared peripheral DMA with SSI2 which doesn't require use of the peripheral DMA unit-- SSI2 is mapped to the SDMA core address space. Fix some break keywords in get_script_pc(). Use the patched script for mcu_2_app (BSP appears to have neglected to update that). Use _SHP instead of _SP for shared peripheral constants (consistency).	2009-03-09 04:25:25 +00:00
avic-imx31.c
avic-imx31.h
backlight-imx31.c	Gigabeat S: Try to save some power. Implement lcd_enable and turn off LCD DMA channel when backlight is off.	2009-02-09 07:01:46 +00:00
backlight-target.h
button-imx31.c	Gigabeat S: Get remote keymaps up to snuff and working. Do a couple tweaks on main unit ones. Cleanup keymap file a bit. Fix main button scanner to not clobber remote button. Fix a bug in actions.c where 'LAST_ITEM_IN_LIST' didn't really terminate scanning immediately. It would do an additional call into get_context_map and silently pick up ACTION_STD.	2009-02-03 10:55:30 +00:00
button-target.h	Gigabeat S: Add remote control reading and proper headphone insert detection. We need keymaps! A few were copied straight from Gigabeat F/X just to get things worked out.	2009-01-23 20:55:17 +00:00
clkctl-imx31.c	Gigabeat S: Implement an SDMA API and use it in the PCM driver. Some other miscellaneous adjustments to recording and PCM buffer to accomodate use of physical addresses and cache coherency.	2009-02-08 22:32:41 +00:00
clkctl-imx31.h	Gigabeat S: Implement an SDMA API and use it in the PCM driver. Some other miscellaneous adjustments to recording and PCM buffer to accomodate use of physical addresses and cache coherency.	2009-02-08 22:32:41 +00:00
fmradio-i2c-gigabeat-s.c
gpio-gigabeat-s.c	i.MX31: Make SPI more tolerant by resetting and forcing a reconfigure of the interface if an error ever happens. Better handle PMIC GPIO interrupt; it definitely doesn't low-pulse PRIINT (remains high if sources become active again or stay active while acking) so needed rising edge may never happen in such a case-- use high-level detection rather than rising edge. Optimize the reg/clr/set/mod functions a bit since they get more regular use now.	2009-02-02 02:38:21 +00:00
gpio-imx31.c
gpio-imx31.h
gpio-target.h	i.MX31: Make SPI more tolerant by resetting and forcing a reconfigure of the interface if an error ever happens. Better handle PMIC GPIO interrupt; it definitely doesn't low-pulse PRIINT (remains high if sources become active again or stay active while acking) so needed rising edge may never happen in such a case-- use high-level detection rather than rising edge. Optimize the reg/clr/set/mod functions a bit since they get more regular use now.	2009-02-02 02:38:21 +00:00
headphone-gigabeat-s.c	Gigabeat S: Add remote control reading and proper headphone insert detection. We need keymaps! A few were copied straight from Gigabeat F/X just to get things worked out.	2009-01-23 20:55:17 +00:00
i2c-imx31.c
i2c-imx31.h
i2s-imx31.c
kernel-imx31.c	Gigabeat S: Implement MDMA and UDMA disk access for bootloader and main binary. Add a needed SDMA API to check channel errors. Increase audio DMA channels' priority as required. Reads and writes measure faster accross all test_disk tests and especially at 4KB and 1MB.	2009-03-12 06:31:40 +00:00
lcd-imx31.c	Rework lcd_enabled and lcd_set/call_enable hook	2009-03-17 02:43:47 +00:00
lcd-target.h
mc13783-gigabeat-s.c
mc13783-imx31.c	i.MX31: Make SPI more tolerant by resetting and forcing a reconfigure of the interface if an error ever happens. Better handle PMIC GPIO interrupt; it definitely doesn't low-pulse PRIINT (remains high if sources become active again or stay active while acking) so needed rising edge may never happen in such a case-- use high-level detection rather than rising edge. Optimize the reg/clr/set/mod functions a bit since they get more regular use now.	2009-02-02 02:38:21 +00:00
mc13783-target.h
mmu-imx31.c	Gigabeat S: Implement an SDMA API and use it in the PCM driver. Some other miscellaneous adjustments to recording and PCM buffer to accomodate use of physical addresses and cache coherency.	2009-02-08 22:32:41 +00:00
mmu-imx31.h	Gigabeat S: Implement an SDMA API and use it in the PCM driver. Some other miscellaneous adjustments to recording and PCM buffer to accomodate use of physical addresses and cache coherency.	2009-02-08 22:32:41 +00:00
pcm-imx31.c	Gigabeat S: Implement MDMA and UDMA disk access for bootloader and main binary. Add a needed SDMA API to check channel errors. Increase audio DMA channels' priority as required. Reads and writes measure faster accross all test_disk tests and especially at 4KB and 1MB.	2009-03-12 06:31:40 +00:00
power-imx31.c
power-imx31.h
powermgmt-imx31.c
powermgmt-target.h
serial-imx31.h
spi-imx31.c	i.MX31: Make SPI more tolerant by resetting and forcing a reconfigure of the interface if an error ever happens. Better handle PMIC GPIO interrupt; it definitely doesn't low-pulse PRIINT (remains high if sources become active again or stay active while acking) so needed rising edge may never happen in such a case-- use high-level detection rather than rising edge. Optimize the reg/clr/set/mod functions a bit since they get more regular use now.	2009-02-02 02:38:21 +00:00
spi-imx31.h
system-imx31.c	Gigabeat S: Implement an SDMA API and use it in the PCM driver. Some other miscellaneous adjustments to recording and PCM buffer to accomodate use of physical addresses and cache coherency.	2009-02-08 22:32:41 +00:00
system-target.h	Refine the routines in mmu-arm.c and move them to mmu-arm.S since the code is now 100% assembly.	2009-02-11 23:56:00 +00:00
timer-imx31.c
timer-target.h
usb-imx31.c	Hopefully make some progress against FS#9831. iPod Video seems fine now under XP at least. Move false reset detection to the USB target code. Gigabeat S works using the OTG module upon bus reset. Portal Player targets verify that the USB pin detect is ok upon bus reset.	2009-01-29 01:28:34 +00:00
usb-target.h
wmcodec-imx31.c	Gigabeat S: Switch SSI1 and 2 around so that playback can use the shared peripheral DMA with SSI2 which doesn't require use of the peripheral DMA unit-- SSI2 is mapped to the SDMA core address space. Fix some break keywords in get_script_pc(). Use the patched script for mcu_2_app (BSP appears to have neglected to update that). Use _SHP instead of _SP for shared peripheral constants (consistency).	2009-03-09 04:25:25 +00:00