rockbox/firmware/target/arm
Michael Sparmann d03fe64dcf iPod Nano 2G USB support based on the S3C6400X datasheet. Disabled by default for now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23285 a1c6a512-1295-4272-9138-f99709370657
2009-10-20 06:37:07 +00:00
..
archos/av300
as3525 AMS Sansa: Adjust SD Card frequency to Identification frequency at beginning of card init instead of the end of pl180 controller init. 2009-10-19 05:34:25 +00:00
at91sam Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
imx31 Revise r23225 a bit, removing the debug_printf function and implementing more generic lcd_(remote)_putsf function(s) instead and use those in more places 2009-10-17 18:02:48 +00:00
ipod Use wrap-safe TIME_BEFORE/TIME_AFTER macros to compare times with current_time, instead of comparing them directly. 2009-10-18 15:50:30 +00:00
iriver Various files: make functions static if they're local or make sure there is a proper #include if not 2009-08-06 09:28:25 +00:00
olympus mrobe100: power off HDD (courtesy of lowlight) ~2h extra playtime 2009-08-14 21:11:08 +00:00
philips fix svn properties 2009-08-19 22:41:14 +00:00
pnx0101 Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
s3c2440 Initial mini2440 port. 2009-10-19 18:14:27 +00:00
s5l8700 iPod Nano 2G USB support based on the S3C6400X datasheet. Disabled by default for now. 2009-10-20 06:37:07 +00:00
samsung Samsung YH920 : fix lcd_blit_mono displaying twice too wide 2009-10-03 13:56:23 +00:00
sandisk fix more red 2009-08-19 22:36:39 +00:00
tatung make ELIO_TPJ1022 bootloader compile again 2009-07-17 22:07:06 +00:00
tcc77x i7: _backlight_init() turn backlight on, as we can miss panic message 2009-09-18 06:01:56 +00:00
tcc780x Fix logic error in D2+ touchscreen driver. 2009-10-16 22:14:27 +00:00
tms320dm320 Revise r23225 a bit, removing the debug_printf function and implementing more generic lcd_(remote)_putsf function(s) instead and use those in more places 2009-10-17 18:02:48 +00:00
adc-as3514.c
adc-pp5020.c
ascodec-pp.c
ascodec-target.h
ata-as-arm.S ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time. 2009-07-11 23:43:44 +00:00
ata-nand-telechips.c Core changes to allow storage drivers to do cleanup on shutdown, and iPod Nano 2G shutdown code rework (FS#10668) 2009-10-09 20:36:09 +00:00
ata-pp5002.c Remove some unused declarations 2009-05-21 12:32:26 +00:00
ata-pp5020.c 3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work. 2009-05-25 21:10:45 +00:00
ata-sd-pp.c sd_first_drive is only used when HAVE_HOTSWAP is defined, so add appropriate #ifdefs 2009-07-20 19:46:36 +00:00
ata-target.h Remove some unused declarations 2009-05-21 12:32:26 +00:00
audio-pp.c
crt0-pp-bl.S Make RoLo work on PP5002. * Rename CACHE_CTL flag values on PP5002 for consistency. 2009-10-19 21:38:52 +00:00
crt0-pp.S
crt0.S FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up 2009-06-08 23:05:33 +00:00
ffs-arm.S
i2c-pp.c Philips SA9200: initialize i2c, i2s, and as3514 as the OF does. Fixes clicks/pops heard when reading the adc. 2009-08-01 17:51:00 +00:00
i2c-telechips.c Fix missing i2c mutex initialisation for telechips. 2009-06-21 13:26:32 +00:00
i2s-pp.c Philips SA9200: initialize i2c, i2s, and as3514 as the OF does. Fixes clicks/pops heard when reading the adc. 2009-08-01 17:51:00 +00:00
kernel-pp.c
lcd-as-memframe.S Apply some ARMv6 optimisations to YUV blitting. Speeds up mpegplayer on Gigabeat S by ~2% in undithered and ~7.5% in dithered mode. 2009-07-15 22:14:21 +00:00
lcd-c200_c200v2.c Sansa c200v2: update DBOP button reading mechanism, this enables readout of the volume buttons, rec and hold button. 2009-09-05 18:56:59 +00:00
lcd-ssd1815.c
memcpy-arm.S
memmove-arm.S
memset-arm.S
memset16-arm.S
mmu-arm.h ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future. 2009-07-05 01:17:25 +00:00
mmu-arm.S Split ARMv6 code from mmu-arm.S 2009-10-18 13:07:14 +00:00
mmu-armv6.S Split ARMv6 code from mmu-arm.S 2009-10-18 13:07:14 +00:00
pcm-pp.c
pcm-telechips.c i7: pcm-telechips fix sampling rate that was about 40000 instead of 44100 2009-09-20 19:53:15 +00:00
powermgmt-ascodec.c
sd-pp-target.h Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD) 2009-07-01 10:07:22 +00:00
system-arm.c Revise r23225 a bit, removing the debug_printf function and implementing more generic lcd_(remote)_putsf function(s) instead and use those in more places 2009-10-17 18:02:48 +00:00
system-arm.h
system-pp502x.c initial commit of remote support for m:robe 100 courtesy of lowlight; simulator support including small fixes for the m:robe 500 2009-07-26 14:26:14 +00:00
system-pp5002.c Make RoLo work on PP5002. * Rename CACHE_CTL flag values on PP5002 for consistency. 2009-10-19 21:38:52 +00:00
system-target.h Remove some unused declarations 2009-05-21 12:32:26 +00:00
timer-pp.c Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
usb-drv-arc.c don't treat extremely quick transfers as errors 2009-08-13 18:50:43 +00:00
usb-fw-pp502x.c make ELIO_TPJ1022 bootloader compile again 2009-07-17 22:07:06 +00:00
usb-fw-pp5002.c
usb-s3c6400x.c iPod Nano 2G USB support based on the S3C6400X datasheet. Disabled by default for now. 2009-10-20 06:37:07 +00:00
usb-target.h
usb-tcc.c Add working USB HID driver, by Tomer Shalev (part of his GSoC work). 2009-05-16 15:30:09 +00:00
wmcodec-pp.c
wmcodec-telechips.c