rockbox/firmware
Amaury Pouly 9b02ce9e49 as3525v2-usb: mask usb interrupt when setting up a transfer
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29130 a1c6a512-1295-4272-9138-f99709370657
2011-01-24 15:34:14 +00:00
..
common Autodetect sector size on superfloppy volumes based on the FAT32 BPB (kudos to Frank Gevaerts) 2011-01-02 22:28:22 +00:00
decompressor
drivers Fix r29123: the variable should be initialized every time in the loop 2011-01-23 21:57:23 +00:00
export Fuze V2: Fix hold switch behavior. Add a GPIOx_PIN_MASK macro to AS3525. 2011-01-20 14:26:58 +00:00
include Also PREFIX() other filesystem functions. I hope I got them all now... 2010-12-29 20:10:11 +00:00
libc
target as3525v2-usb: mask usb interrupt when setting up a transfer 2011-01-24 15:34:14 +00:00
test Redo r28026 so that all .S files get the __ASSEMBLER__ define. 2010-12-27 17:27:59 +00:00
usbstack Add a higher level USB detection that prevents fraudulent bus resets from causing USB mode to be entered. Enable for SA9200 only at this time. Also, for SA9200, use the bus power GPIO rather than the 'connector inserted' GPIO to detect the cable. 2011-01-17 12:24:41 +00:00
arabjoin.c
arabjoin.h
ata_idle_notify.c
backlight-sw-fading.c
backlight.c Try to get some control over #ifdef hell in usb.c by refactoring and inline function use. SYS_USB_DISCONNECTED_ACK hasn't been doing anything useful for the USB thread; remove it. USB thread simply ignores that value. Observe only valid usb_state transitions. 2011-01-18 14:10:06 +00:00
bidi.c
buffer.c
COPYING
debug.c
eeprom_settings.c
enc_base.c
events.c
firmware.make
font.c Get rid of get_user_file_path and do the path handling in wrappers for open() and friends. 2010-12-06 22:26:31 +00:00
font_cache.c
general.c
hangul.c
ifp_usb_serial.c
kernel.c Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly). 2011-01-15 08:19:30 +00:00
load_code.c Get rid of get_user_file_path and do the path handling in wrappers for open() and friends. 2010-12-06 22:26:31 +00:00
logf.c
lru.c
panic.c
pcm.c
pcm_sampr.c
powermgmt.c Remove code that was unintentionally kept in a resynchronized patch in FS#3001. This closes FS#11873. 2011-01-23 12:24:56 +00:00
profile.c
README
rolo.c
rom.lds
screendump.c
scroll_engine.c
sdmmc.c
sound.c WM8978: sound.c weirdness strikes again. Prescaler values have to be in centibels. 2011-01-21 08:31:40 +00:00
SOURCES Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly). 2011-01-15 08:19:30 +00:00
storage.c
system.c
thread.c Return thread ID as a string for name when a thread isn't named or name cannot be used, as comment says, not slot pointer. 2010-12-29 20:03:47 +00:00
timer.c
tuner.c
usb.c Fix colors from r29084. Had some things in the wrong preprocessor blocks. 2011-01-18 14:35:56 +00:00

See docs/README