rockbox/firmware/target/coldfire/iriver/h300/usb-h300.c
Rafaël Carré 568c441fd8 usb-target.h: remove
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31498 a1c6a512-1295-4272-9138-f99709370657
2011-12-31 18:44:55 +00:00

59 lines
1.7 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by Linus Nielsen Feltzing
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include <stdbool.h>
#include "cpu.h"
#include "system.h"
#include "kernel.h"
#include "usb.h"
void usb_init_device(void)
{
or_l(0x00000080, &GPIO1_FUNCTION); /* GPIO39 is the USB detect input */
/* ISD300 3.3V ON */
or_l(8,&GPIO1_FUNCTION);
or_l(8,&GPIO1_OUT);
or_l(8,&GPIO1_ENABLE);
/* Tristate the SCK/SDA to the ISD300 config EEPROM */
and_l(~0x03000000, &GPIO_ENABLE);
or_l(0x03000000, &GPIO_FUNCTION);
}
int usb_detect(void)
{
return (GPIO1_READ & 0x80) ? USB_INSERTED : USB_EXTRACTED;
}
void usb_enable(bool on)
{
if(on)
{
/* Power on the Cypress chip */
and_l(~0x00000008,&GPIO1_OUT);
sleep(2);
}
else
{
/* Power off the Cypress chip */
or_l(0x00000008,&GPIO1_OUT);
}
}