Marcoen Hirschberg c7e5d78241 initial Meizu M6SL port ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16844 a1c6a512-1295-4272-9138-f99709370657		2008-03-27 11:29:24 +00:00
..
archos/av300
imx31	Consistent naming scheme the various blit functions. * Removed lcd_blit_mono() for colour targets. Plugin API became incompatible, so sort, clean up & bump. * Implemented lcd_blit_mono() for M3.	2008-03-24 00:35:53 +00:00
ipod	Save a few registers in assembler routines for iPod 5Gs LCD driver and YUV conversion.	2008-03-27 07:46:04 +00:00
iriver	Make H10 bootloader successfully boot the OF again.	2008-03-27 00:50:50 +00:00
olympus	Consistent naming scheme the various blit functions. * Removed lcd_blit_mono() for colour targets. Plugin API became incompatible, so sort, clean up & bump. * Implemented lcd_blit_mono() for M3.	2008-03-24 00:35:53 +00:00
pnx0101	Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).	2008-03-26 01:50:41 +00:00
s3c2440	Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).	2008-03-26 01:50:41 +00:00
s5l8700/meizu-m6sl	initial Meizu M6SL port	2008-03-27 11:29:24 +00:00
sandisk	Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed.	2008-03-25 02:34:12 +00:00
tatung/tpj1022	Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).	2008-03-26 01:50:41 +00:00
tcc77x	Consistent naming scheme the various blit functions. * Removed lcd_blit_mono() for colour targets. Plugin API became incompatible, so sort, clean up & bump. * Implemented lcd_blit_mono() for M3.	2008-03-24 00:35:53 +00:00
tcc780x	Consistent naming scheme the various blit functions. * Removed lcd_blit_mono() for colour targets. Plugin API became incompatible, so sort, clean up & bump. * Implemented lcd_blit_mono() for M3.	2008-03-24 00:35:53 +00:00
tms320dm320	Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).	2008-03-26 01:50:41 +00:00
adc-pp5020.c	make mrobe100 work again	2008-02-10 16:06:01 +00:00
ata-as-arm.S
ata-pp5002.c
ata-pp5020.c	Restore a line accidentally removed by r15705	2007-11-20 07:52:37 +00:00
ata-target.h
audio-pp.c	Hopefully fix line-in recording on PortalPlayer targets (H10 in particular).	2007-11-11 23:41:54 +00:00
crt0-pp-bl.S	Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.	2007-11-27 01:20:26 +00:00
crt0-pp.S	Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.	2007-11-27 01:20:26 +00:00
ffs-arm.S	Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed.	2008-03-25 02:34:12 +00:00
i2c-pp.c	Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).	2008-03-26 01:50:41 +00:00
i2c-telechips.c	Initial Cowon D2 commit:	2008-01-14 22:04:48 +00:00
i2s-pp.c	Finish the conversion to packed i2s for PP502x. Karl Kurbjun-approved for Mini-1G. Simplify the pcm format selection #ifdefs.	2007-10-16 04:19:18 +00:00
lcd-as-memframe.S	More M:Robe work including a fix to lcd-as-memframe for larger screens thanks to Michael Sevakis. Also fixes simulator builds.	2007-10-21 23:12:17 +00:00
memcpy-arm.S
memmove-arm.S
memset-arm.S
memset16-arm.S
mmu-arm.c	Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe	2007-10-23 03:29:15 +00:00
mmu-arm.h	Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe	2007-10-23 03:29:15 +00:00
pcm-pp.c	Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).	2008-03-26 01:50:41 +00:00
system-arm.h	Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).	2008-03-26 01:50:41 +00:00
system-pp502x.c	Modification to scale_suspend_core to prevent a potential permanent freezing of the other core. Just unfreeze it unconditionally after freezing it since it really makes no difference to do so right now. Don't bother with freezing/unfreezing if compiling as single.	2008-03-21 17:20:57 +00:00
system-pp5002.c	Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.	2007-11-27 01:20:26 +00:00
system-target.h	Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.	2007-11-27 01:20:26 +00:00
usb-drv-pp502x.c	move boosting for usb around a bit, so the cpu is boosted for the entire duration of actual use of storage. On some setups just boosting for the actual transfers doesn't seem to work	2008-03-20 22:05:11 +00:00
usb-fw-pp502x.c	Make the e200 bootloader able to load the OF again.	2008-03-26 10:37:17 +00:00
usb-fw-pp5002.c	FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value.	2007-09-04 08:03:07 +00:00
usb-target.h
wmcodec-pp.c	Do some crackdown on kernel object reinitialization after they could be in use and use before initialization. For c200/e200: Be sure fat cache and ata locks are acquired in the proper order during hot swapping. Delay hotswap monitoring until after initial file mounting (address 2nd kobj concern + possible call of fat driver before init).	2008-03-12 10:03:52 +00:00
wmcodec-telechips.c	Initial Cowon D2 commit:	2008-01-14 22:04:48 +00:00