24294bda15
When performing an OUT transfer which is not a multiple of the max packet size, the last packet of the OUT transfer should be a short packet. However, there's no guarantee the host sends the expected amount of data in the final packet. The DWC2 USB controller handles this case by accepting any size packet and copying it out to memory. So if the packet is bigger than expected, it'll overrun the caller's buffer and Bad Things will happen. The USB 2.0 spec seems to endorse this behavior. Section 8.5.1 says "an ACK handshake indicates the endpoint has space for a wMaxPacketSize data payload." So it is possible that other USB controllers share the DWC2's behavior. The simplest solution is to force all USB RX buffers to be big enough to hold the transfer size, rounded up to a multiple of the max packet size. For example, a transfer of 700 bytes would require a 1024-byte buffer if the MPS = 512 bytes. Change-Id: Ibb84d2b2d53aec8800a3a7c2449f7a17480acbcf
901 lines
28 KiB
C
901 lines
28 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2009 by Tomer Shalev
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "string.h"
|
|
#include "system.h"
|
|
#include "usb_core.h"
|
|
#include "usb_drv.h"
|
|
#include "kernel.h"
|
|
#include "powermgmt.h"
|
|
#include "usb_hid.h"
|
|
#include "usb_class_driver.h"
|
|
/*#define LOGF_ENABLE*/
|
|
#include "logf.h"
|
|
|
|
/* Documents avaiable here: http://www.usb.org/developers/devclass_docs/ */
|
|
|
|
#define HID_VER 0x0110 /* 1.1 */
|
|
/* Subclass Codes (HID1_11.pdf, page 18) */
|
|
#define SUBCLASS_NONE 0
|
|
#define SUBCLASS_BOOT_INTERFACE 1
|
|
/* Protocol Codes (HID1_11.pdf, page 19) */
|
|
#define PROTOCOL_CODE_NONE 0
|
|
#define PROTOCOL_CODE_KEYBOARD 1
|
|
#define PROTOCOL_CODE_MOUSE 2
|
|
/* HID main items (HID1_11.pdf, page 38) */
|
|
#define INPUT 0x80
|
|
#define OUTPUT 0x90
|
|
#define FEATURE 0xB0
|
|
#define COLLECTION 0xA0
|
|
#define COLLECTION_PHYSICAL 0x00
|
|
#define COLLECTION_APPLICATION 0x01
|
|
#define END_COLLECTION 0xC0
|
|
/* Parts (HID1_11.pdf, page 40) */
|
|
#define MAIN_ITEM_CONSTANT BIT_N(0) /* 0x01 */
|
|
#define MAIN_ITEM_VARIABLE BIT_N(1) /* 0x02 */
|
|
#define MAIN_ITEM_RELATIVE BIT_N(2) /* 0x04 */
|
|
#define MAIN_ITEM_WRAP BIT_N(3) /* 0x08 */
|
|
#define MAIN_ITEM_NONLINEAR BIT_N(4) /* 0x10 */
|
|
#define MAIN_ITEM_NO_PREFERRED BIT_N(5) /* 0x20 */
|
|
#define MAIN_ITEM_NULL_STATE BIT_N(6) /* 0x40 */
|
|
#define MAIN_ITEM_VOLATILE BIT_N(7) /* 0x80 */
|
|
#define MAIN_ITEM_BUFFERED_BYTES BIT_N(8) /* 0x0100 */
|
|
/* HID global items (HID1_11.pdf, page 45) */
|
|
#define USAGE_PAGE 0x04
|
|
#define LOGICAL_MINIMUM 0x14
|
|
#define LOGICAL_MAXIMUM 0x24
|
|
#define REPORT_SIZE 0x74
|
|
#define REPORT_ID 0x84
|
|
#define REPORT_COUNT 0x94
|
|
/* HID local items (HID1_11.pdf, page 50) */
|
|
#define USAGE_MINIMUM 0x18
|
|
#define USAGE_MAXIMUM 0x28
|
|
/* Types of class descriptors (HID1_11.pdf, page 59) */
|
|
#define USB_DT_HID 0x21
|
|
#define USB_DT_REPORT 0x22
|
|
|
|
#define CONSUMER_USAGE 0x09
|
|
|
|
/* HID-only class specific requests (HID1_11.pdf, page 61) */
|
|
#define USB_HID_GET_REPORT 0x01
|
|
#define USB_HID_GET_IDLE 0x02
|
|
#define USB_HID_GET_PROTOCOL 0x03
|
|
#define USB_HID_SET_REPORT 0x09
|
|
#define USB_HID_SET_IDLE 0x0A
|
|
#define USB_HID_SET_PROTOCOL 0x0B
|
|
|
|
/* Get_Report and Set_Report Report Type field (HID1_11.pdf, page 61) */
|
|
#define REPORT_TYPE_INPUT 0x01
|
|
#define REPORT_TYPE_OUTPUT 0x02
|
|
#define REPORT_TYPE_FEATURE 0x03
|
|
|
|
#define HID_BUF_SIZE_MSG 16
|
|
#define HID_BUF_SIZE_CMD 16
|
|
#define HID_BUF_SIZE_REPORT 160
|
|
#define HID_NUM_BUFFERS 5
|
|
#define SET_REPORT_BUF_LEN 2
|
|
#define GET_REPORT_BUF_LEN 2
|
|
|
|
#ifdef LOGF_ENABLE
|
|
|
|
#define BUF_DUMP_BUF_LEN HID_BUF_SIZE_REPORT
|
|
#define BUF_DUMP_PREFIX_SIZE 5
|
|
#define BUF_DUMP_ITEMS_IN_LINE 8
|
|
#define BUF_DUMP_LINE_SIZE (BUF_DUMP_ITEMS_IN_LINE * 3)
|
|
#define BUF_DUMP_NUM_LINES (BUF_DUMP_BUF_LEN / BUF_DUMP_ITEMS_IN_LINE)
|
|
#endif
|
|
|
|
#define HID_BUF_INC(i) do { (i) = ((i) + 1) % HID_NUM_BUFFERS; } while (0)
|
|
#define PACK_VAL(dest, val) *(dest)++ = (val) & 0xff
|
|
|
|
#define REPORT_ID_BACKGROUND REPORT_ID_COUNT
|
|
|
|
typedef enum
|
|
{
|
|
REPORT_ID_KEYBOARD = 1,
|
|
REPORT_ID_CONSUMER,
|
|
#ifdef HAVE_USB_HID_MOUSE
|
|
REPORT_ID_MOUSE,
|
|
#endif
|
|
REPORT_ID_COUNT,
|
|
} report_id_t;
|
|
|
|
/* hid interface */
|
|
static struct usb_interface_descriptor __attribute__((aligned(2)))
|
|
interface_descriptor =
|
|
{
|
|
.bLength = sizeof(struct usb_interface_descriptor),
|
|
.bDescriptorType = USB_DT_INTERFACE,
|
|
.bInterfaceNumber = 0,
|
|
.bAlternateSetting = 0,
|
|
.bNumEndpoints = 1,
|
|
.bInterfaceClass = USB_CLASS_HID,
|
|
.bInterfaceSubClass = SUBCLASS_BOOT_INTERFACE,
|
|
.bInterfaceProtocol = PROTOCOL_CODE_KEYBOARD,
|
|
.iInterface = 0
|
|
};
|
|
|
|
struct usb_hid_descriptor {
|
|
uint8_t bLength;
|
|
uint8_t bDescriptorType;
|
|
uint16_t wBcdHID;
|
|
uint8_t bCountryCode;
|
|
uint8_t bNumDescriptors;
|
|
uint8_t bDescriptorType0;
|
|
uint16_t wDescriptorLength0;
|
|
} __attribute__ ((packed));
|
|
|
|
static struct usb_hid_descriptor __attribute__((aligned(2))) hid_descriptor =
|
|
{
|
|
.bLength = sizeof(struct usb_hid_descriptor),
|
|
.bDescriptorType = USB_DT_HID,
|
|
.wBcdHID = HID_VER,
|
|
.bCountryCode = 0,
|
|
.bNumDescriptors = 1,
|
|
.bDescriptorType0 = USB_DT_REPORT,
|
|
.wDescriptorLength0 = 0
|
|
};
|
|
|
|
static struct usb_endpoint_descriptor __attribute__((aligned(2)))
|
|
endpoint_descriptor =
|
|
{
|
|
.bLength = sizeof(struct usb_endpoint_descriptor),
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bEndpointAddress = 0,
|
|
.bmAttributes = USB_ENDPOINT_XFER_INT,
|
|
.wMaxPacketSize = 0,
|
|
.bInterval = 0
|
|
};
|
|
|
|
typedef struct
|
|
{
|
|
uint8_t usage_page;
|
|
/* Write the id into the buffer in the appropriate location, and returns the
|
|
* buffer length */
|
|
uint8_t (*buf_set)(unsigned char *buf, int id);
|
|
bool is_key_released;
|
|
} usb_hid_report_t;
|
|
|
|
static usb_hid_report_t usb_hid_reports[REPORT_ID_COUNT];
|
|
|
|
static unsigned char report_descriptor[HID_BUF_SIZE_REPORT]
|
|
USB_DEVBSS_ATTR __attribute__((aligned(32)));
|
|
|
|
static unsigned char send_buffer[HID_NUM_BUFFERS][HID_BUF_SIZE_MSG]
|
|
USB_DEVBSS_ATTR __attribute__((aligned(32)));
|
|
static size_t send_buffer_len[HID_NUM_BUFFERS];
|
|
static int cur_buf_prepare;
|
|
static int cur_buf_send;
|
|
|
|
static bool active = false;
|
|
static bool currently_sending = false;
|
|
static int ep_in;
|
|
static int usb_interface;
|
|
|
|
static void usb_hid_try_send_drv(void);
|
|
|
|
static void pack_parameter(unsigned char **dest, bool is_signed, bool mark_size,
|
|
uint8_t parameter, uint32_t value)
|
|
{
|
|
uint8_t size_value = 1; /* # of bytes */
|
|
uint32_t v = value;
|
|
|
|
while (v >>= 8)
|
|
size_value++;
|
|
|
|
if (is_signed)
|
|
{
|
|
bool is_negative = 0;
|
|
|
|
switch (size_value)
|
|
{
|
|
case 1:
|
|
is_negative = (int8_t)value < 0;
|
|
break;
|
|
case 2:
|
|
is_negative = (int16_t)value < 0;
|
|
break;
|
|
case 3:
|
|
case 4:
|
|
is_negative = (int32_t)value < 0;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (is_negative)
|
|
size_value++;
|
|
}
|
|
|
|
**dest = parameter | (mark_size ? size_value : 0);
|
|
(*dest)++;
|
|
|
|
while (size_value--)
|
|
{
|
|
**dest = value & 0xff;
|
|
(*dest)++;
|
|
value >>= 8;
|
|
}
|
|
}
|
|
|
|
int usb_hid_request_endpoints(struct usb_class_driver *drv)
|
|
{
|
|
ep_in = usb_core_request_endpoint(USB_ENDPOINT_XFER_INT, USB_DIR_IN, drv);
|
|
if (ep_in < 0)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int usb_hid_set_first_interface(int interface)
|
|
{
|
|
usb_interface = interface;
|
|
|
|
return interface + 1;
|
|
}
|
|
|
|
#ifdef LOGF_ENABLE
|
|
static unsigned char buf_dump_ar[BUF_DUMP_NUM_LINES][BUF_DUMP_LINE_SIZE + 1]
|
|
USB_DEVBSS_ATTR __attribute__((aligned(32)));
|
|
|
|
void buf_dump(unsigned char *buf, size_t size, char *msg)
|
|
{
|
|
static const char v[] = { '0', '1', '2', '3', '4', '5', '6', '7', '8', '9',
|
|
'A', 'B', 'C', 'D', 'E', 'F' };
|
|
|
|
size_t i = 0;
|
|
for (int line = 0; i < size; line++)
|
|
{
|
|
int i0 = i;
|
|
char *b = buf_dump_ar[line];
|
|
|
|
for (int j = 0; j < BUF_DUMP_ITEMS_IN_LINE && i < size; j++, i++)
|
|
{
|
|
*b++ = v[buf[i] >> 4];
|
|
*b++ = v[buf[i] & 0xF];
|
|
*b++ = ' ';
|
|
}
|
|
*b = 0;
|
|
|
|
/* Prefix must be of len BUF_DUMP_PREFIX_SIZE */
|
|
logf("%03d: %s %s", i0, buf_dump_ar[line], msg);
|
|
}
|
|
}
|
|
#else
|
|
#undef buf_dump
|
|
#define buf_dump(...)
|
|
#endif
|
|
|
|
#define BUF_LEN_KEYBOARD 7
|
|
static uint8_t buf_set_keyboard(unsigned char *buf, int id)
|
|
{
|
|
memset(buf, 0, BUF_LEN_KEYBOARD);
|
|
int key, i = 1;
|
|
|
|
/* Each key is a word in id (up to 4 keys supported) */
|
|
while ((key = id & 0xff))
|
|
{
|
|
/* Each modifier key is a bit in the first byte */
|
|
if (HID_KEYBOARD_LEFT_CONTROL <= key && key <= HID_KEYBOARD_RIGHT_GUI)
|
|
buf[0] |= (1 << (key - HID_KEYBOARD_LEFT_CONTROL));
|
|
else /* Any other key should be set in a separate byte */
|
|
buf[i++] = (uint8_t)key;
|
|
|
|
id >>= 8;
|
|
}
|
|
|
|
return BUF_LEN_KEYBOARD;
|
|
}
|
|
|
|
#define BUF_LEN_CONSUMER 4
|
|
static uint8_t buf_set_consumer(unsigned char *buf, int id)
|
|
{
|
|
memset(buf, 0, BUF_LEN_CONSUMER);
|
|
buf[0] = (uint8_t)id;
|
|
|
|
return BUF_LEN_CONSUMER;
|
|
}
|
|
|
|
#ifdef HAVE_USB_HID_MOUSE
|
|
#define MOUSE_WHEEL_STEP 1
|
|
#define MOUSE_STEP 8
|
|
#define MOUSE_BUTTON_LEFT 0x1
|
|
#define MOUSE_BUTTON_RIGHT 0x2
|
|
//#define MOUSE_BUTTON_MIDDLE 0x4
|
|
#define MOUSE_BUTTON 0
|
|
#define MOUSE_X 1
|
|
#define MOUSE_Y 2
|
|
#define MOUSE_WHEEL 3
|
|
#define BUF_LEN_MOUSE 4
|
|
#define MOUSE_ACCEL_FACTOR(count) ((count) / 2)
|
|
#define MOUSE_DO(item, step) (buf[(item)] = ((uint8_t)(step)))
|
|
|
|
static uint8_t buf_set_mouse(unsigned char *buf, int id)
|
|
{
|
|
static int count = 0;
|
|
int step = MOUSE_STEP;
|
|
|
|
memset(buf, 0, BUF_LEN_MOUSE);
|
|
|
|
/* Set proper button */
|
|
switch (id)
|
|
{
|
|
case HID_MOUSE_BUTTON_LEFT:
|
|
case HID_MOUSE_LDRAG_UP:
|
|
case HID_MOUSE_LDRAG_UP_REP:
|
|
case HID_MOUSE_LDRAG_DOWN:
|
|
case HID_MOUSE_LDRAG_DOWN_REP:
|
|
case HID_MOUSE_LDRAG_LEFT:
|
|
case HID_MOUSE_LDRAG_LEFT_REP:
|
|
case HID_MOUSE_LDRAG_RIGHT:
|
|
case HID_MOUSE_LDRAG_RIGHT_REP:
|
|
MOUSE_DO(MOUSE_BUTTON, MOUSE_BUTTON_LEFT);
|
|
break;
|
|
case HID_MOUSE_BUTTON_RIGHT:
|
|
case HID_MOUSE_RDRAG_UP:
|
|
case HID_MOUSE_RDRAG_UP_REP:
|
|
case HID_MOUSE_RDRAG_DOWN:
|
|
case HID_MOUSE_RDRAG_DOWN_REP:
|
|
case HID_MOUSE_RDRAG_LEFT:
|
|
case HID_MOUSE_RDRAG_LEFT_REP:
|
|
case HID_MOUSE_RDRAG_RIGHT:
|
|
case HID_MOUSE_RDRAG_RIGHT_REP:
|
|
MOUSE_DO(MOUSE_BUTTON, MOUSE_BUTTON_RIGHT);
|
|
break;
|
|
case HID_MOUSE_BUTTON_LEFT_REL:
|
|
case HID_MOUSE_BUTTON_RIGHT_REL:
|
|
/* Keep buf empty, to mark mouse button release */
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Handle mouse accelarated movement */
|
|
switch (id)
|
|
{
|
|
case HID_MOUSE_UP:
|
|
case HID_MOUSE_DOWN:
|
|
case HID_MOUSE_LEFT:
|
|
case HID_MOUSE_RIGHT:
|
|
case HID_MOUSE_LDRAG_UP:
|
|
case HID_MOUSE_LDRAG_DOWN:
|
|
case HID_MOUSE_LDRAG_LEFT:
|
|
case HID_MOUSE_LDRAG_RIGHT:
|
|
case HID_MOUSE_RDRAG_UP:
|
|
case HID_MOUSE_RDRAG_DOWN:
|
|
case HID_MOUSE_RDRAG_LEFT:
|
|
case HID_MOUSE_RDRAG_RIGHT:
|
|
count = 0;
|
|
break;
|
|
case HID_MOUSE_UP_REP:
|
|
case HID_MOUSE_DOWN_REP:
|
|
case HID_MOUSE_LEFT_REP:
|
|
case HID_MOUSE_RIGHT_REP:
|
|
case HID_MOUSE_LDRAG_UP_REP:
|
|
case HID_MOUSE_LDRAG_DOWN_REP:
|
|
case HID_MOUSE_LDRAG_LEFT_REP:
|
|
case HID_MOUSE_LDRAG_RIGHT_REP:
|
|
case HID_MOUSE_RDRAG_UP_REP:
|
|
case HID_MOUSE_RDRAG_DOWN_REP:
|
|
case HID_MOUSE_RDRAG_LEFT_REP:
|
|
case HID_MOUSE_RDRAG_RIGHT_REP:
|
|
count++;
|
|
/* TODO: Find a better mouse accellaration algorithm */
|
|
step *= 1 + MOUSE_ACCEL_FACTOR(count);
|
|
if (step > 255)
|
|
step = 255;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Move/scroll mouse */
|
|
switch (id)
|
|
{
|
|
case HID_MOUSE_UP:
|
|
case HID_MOUSE_UP_REP:
|
|
case HID_MOUSE_LDRAG_UP:
|
|
case HID_MOUSE_LDRAG_UP_REP:
|
|
case HID_MOUSE_RDRAG_UP:
|
|
case HID_MOUSE_RDRAG_UP_REP:
|
|
MOUSE_DO(MOUSE_Y, -step);
|
|
break;
|
|
case HID_MOUSE_DOWN:
|
|
case HID_MOUSE_DOWN_REP:
|
|
case HID_MOUSE_LDRAG_DOWN:
|
|
case HID_MOUSE_LDRAG_DOWN_REP:
|
|
case HID_MOUSE_RDRAG_DOWN:
|
|
case HID_MOUSE_RDRAG_DOWN_REP:
|
|
MOUSE_DO(MOUSE_Y, step);
|
|
break;
|
|
case HID_MOUSE_LEFT:
|
|
case HID_MOUSE_LEFT_REP:
|
|
case HID_MOUSE_LDRAG_LEFT:
|
|
case HID_MOUSE_LDRAG_LEFT_REP:
|
|
case HID_MOUSE_RDRAG_LEFT:
|
|
case HID_MOUSE_RDRAG_LEFT_REP:
|
|
MOUSE_DO(MOUSE_X, -step);
|
|
break;
|
|
case HID_MOUSE_RIGHT:
|
|
case HID_MOUSE_RIGHT_REP:
|
|
case HID_MOUSE_LDRAG_RIGHT:
|
|
case HID_MOUSE_LDRAG_RIGHT_REP:
|
|
case HID_MOUSE_RDRAG_RIGHT:
|
|
case HID_MOUSE_RDRAG_RIGHT_REP:
|
|
MOUSE_DO(MOUSE_X, step);
|
|
break;
|
|
case HID_MOUSE_SCROLL_UP:
|
|
MOUSE_DO(MOUSE_WHEEL, MOUSE_WHEEL_STEP);
|
|
break;
|
|
case HID_MOUSE_SCROLL_DOWN:
|
|
MOUSE_DO(MOUSE_WHEEL, -MOUSE_WHEEL_STEP);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return BUF_LEN_MOUSE;
|
|
}
|
|
#endif /* HAVE_USB_HID_MOUSE */
|
|
|
|
static size_t descriptor_report_get(unsigned char *dest)
|
|
{
|
|
unsigned char *report = dest;
|
|
usb_hid_report_t *usb_hid_report;
|
|
|
|
/* Keyboard control */
|
|
usb_hid_report = &usb_hid_reports[REPORT_ID_KEYBOARD];
|
|
usb_hid_report->usage_page = HID_USAGE_PAGE_KEYBOARD_KEYPAD;
|
|
usb_hid_report->buf_set = buf_set_keyboard;
|
|
usb_hid_report->is_key_released = 1;
|
|
|
|
pack_parameter(&report, 0, 1, USAGE_PAGE,
|
|
HID_USAGE_PAGE_GENERIC_DESKTOP_CONTROLS);
|
|
pack_parameter(&report, 0, 0, CONSUMER_USAGE, HID_GENERIC_DESKTOP_KEYBOARD);
|
|
pack_parameter(&report, 0, 1, COLLECTION, COLLECTION_APPLICATION);
|
|
pack_parameter(&report, 0, 1, REPORT_ID, REPORT_ID_KEYBOARD);
|
|
pack_parameter(&report, 0, 1, USAGE_PAGE, HID_GENERIC_DESKTOP_KEYPAD);
|
|
pack_parameter(&report, 0, 1, USAGE_MINIMUM, HID_KEYBOARD_LEFT_CONTROL);
|
|
pack_parameter(&report, 0, 1, USAGE_MAXIMUM, HID_KEYBOARD_RIGHT_GUI);
|
|
pack_parameter(&report, 1, 1, LOGICAL_MINIMUM, 0);
|
|
pack_parameter(&report, 1, 1, LOGICAL_MAXIMUM, 1);
|
|
pack_parameter(&report, 0, 1, REPORT_SIZE, 1);
|
|
pack_parameter(&report, 0, 1, REPORT_COUNT, 8);
|
|
pack_parameter(&report, 0, 1, INPUT, MAIN_ITEM_VARIABLE);
|
|
pack_parameter(&report, 0, 1, REPORT_SIZE, 1);
|
|
pack_parameter(&report, 0, 1, REPORT_COUNT, 5);
|
|
pack_parameter(&report, 0, 1, USAGE_PAGE, HID_USAGE_PAGE_LEDS);
|
|
pack_parameter(&report, 0, 1, USAGE_MINIMUM, HID_LED_NUM_LOCK);
|
|
pack_parameter(&report, 0, 1, USAGE_MAXIMUM, HID_LED_KANA);
|
|
pack_parameter(&report, 0, 1, OUTPUT, MAIN_ITEM_VARIABLE);
|
|
pack_parameter(&report, 0, 1, REPORT_SIZE, 3);
|
|
pack_parameter(&report, 0, 1, REPORT_COUNT, 1);
|
|
pack_parameter(&report, 0, 1, OUTPUT, MAIN_ITEM_CONSTANT);
|
|
pack_parameter(&report, 0, 1, REPORT_SIZE, 8);
|
|
pack_parameter(&report, 0, 1, REPORT_COUNT, 6);
|
|
pack_parameter(&report, 1, 1, LOGICAL_MINIMUM, 0);
|
|
pack_parameter(&report, 1, 1, LOGICAL_MAXIMUM, HID_KEYBOARD_EX_SEL);
|
|
pack_parameter(&report, 0, 1, USAGE_PAGE, HID_USAGE_PAGE_KEYBOARD_KEYPAD);
|
|
pack_parameter(&report, 0, 1, USAGE_MINIMUM, 0);
|
|
pack_parameter(&report, 0, 1, USAGE_MAXIMUM, HID_KEYBOARD_EX_SEL);
|
|
pack_parameter(&report, 0, 1, INPUT, 0);
|
|
PACK_VAL(report, END_COLLECTION);
|
|
|
|
/* Consumer usage controls - play/pause, stop, etc. */
|
|
usb_hid_report = &usb_hid_reports[REPORT_ID_CONSUMER];
|
|
usb_hid_report->usage_page = HID_USAGE_PAGE_CONSUMER;
|
|
usb_hid_report->buf_set = buf_set_consumer;
|
|
usb_hid_report->is_key_released = 1;
|
|
|
|
pack_parameter(&report, 0, 1, USAGE_PAGE, HID_USAGE_PAGE_CONSUMER);
|
|
pack_parameter(&report, 0, 0, CONSUMER_USAGE,
|
|
HID_CONSUMER_USAGE_CONSUMER_CONTROL);
|
|
pack_parameter(&report, 0, 1, COLLECTION, COLLECTION_APPLICATION);
|
|
pack_parameter(&report, 0, 1, REPORT_ID, REPORT_ID_CONSUMER);
|
|
pack_parameter(&report, 0, 1, REPORT_SIZE, 16);
|
|
pack_parameter(&report, 0, 1, REPORT_COUNT, 2);
|
|
pack_parameter(&report, 1, 1, LOGICAL_MINIMUM, 1);
|
|
pack_parameter(&report, 1, 1, LOGICAL_MAXIMUM, 652);
|
|
pack_parameter(&report, 0, 1, USAGE_MINIMUM,
|
|
HID_CONSUMER_USAGE_CONSUMER_CONTROL);
|
|
pack_parameter(&report, 0, 1, USAGE_MAXIMUM, HID_CONSUMER_USAGE_AC_SEND);
|
|
pack_parameter(&report, 0, 1, INPUT, MAIN_ITEM_NO_PREFERRED |
|
|
MAIN_ITEM_NULL_STATE);
|
|
PACK_VAL(report, END_COLLECTION);
|
|
|
|
#ifdef HAVE_USB_HID_MOUSE
|
|
/* Mouse control */
|
|
usb_hid_report = &usb_hid_reports[REPORT_ID_MOUSE];
|
|
usb_hid_report->usage_page = HID_USAGE_PAGE_GENERIC_DESKTOP_CONTROLS;
|
|
usb_hid_report->buf_set = buf_set_mouse;
|
|
usb_hid_report->is_key_released = 0;
|
|
|
|
pack_parameter(&report, 0, 1, USAGE_PAGE,
|
|
HID_USAGE_PAGE_GENERIC_DESKTOP_CONTROLS);
|
|
pack_parameter(&report, 0, 0, CONSUMER_USAGE, HID_GENERIC_DESKTOP_MOUSE);
|
|
pack_parameter(&report, 0, 1, COLLECTION, COLLECTION_APPLICATION);
|
|
pack_parameter(&report, 0, 1, REPORT_ID, REPORT_ID_MOUSE);
|
|
pack_parameter(&report, 0, 0, CONSUMER_USAGE, HID_GENERIC_DESKTOP_POINTER);
|
|
pack_parameter(&report, 0, 1, COLLECTION, COLLECTION_PHYSICAL);
|
|
pack_parameter(&report, 0, 1, USAGE_PAGE, HID_USAGE_PAGE_BUTTON);
|
|
pack_parameter(&report, 0, 1, USAGE_MINIMUM, 1);
|
|
pack_parameter(&report, 0, 1, USAGE_MAXIMUM, 8);
|
|
pack_parameter(&report, 1, 1, LOGICAL_MINIMUM, 0);
|
|
pack_parameter(&report, 1, 1, LOGICAL_MAXIMUM, 1);
|
|
pack_parameter(&report, 0, 1, REPORT_SIZE, 1);
|
|
pack_parameter(&report, 0, 1, REPORT_COUNT, 8);
|
|
pack_parameter(&report, 0, 1, INPUT, MAIN_ITEM_VARIABLE);
|
|
pack_parameter(&report, 0, 1, USAGE_PAGE,
|
|
HID_USAGE_PAGE_GENERIC_DESKTOP_CONTROLS);
|
|
pack_parameter(&report, 0, 0, CONSUMER_USAGE, HID_GENERIC_DESKTOP_X);
|
|
pack_parameter(&report, 0, 0, CONSUMER_USAGE, HID_GENERIC_DESKTOP_Y);
|
|
pack_parameter(&report, 0, 0, CONSUMER_USAGE, HID_GENERIC_DESKTOP_WHEEL);
|
|
pack_parameter(&report, 0, 1, LOGICAL_MINIMUM, -127 & 0xFF);
|
|
pack_parameter(&report, 0, 1, LOGICAL_MAXIMUM, 127);
|
|
pack_parameter(&report, 0, 1, REPORT_SIZE, 8);
|
|
pack_parameter(&report, 0, 1, REPORT_COUNT, 3);
|
|
pack_parameter(&report, 0, 1, INPUT, MAIN_ITEM_VARIABLE | MAIN_ITEM_RELATIVE);
|
|
PACK_VAL(report, END_COLLECTION);
|
|
PACK_VAL(report, END_COLLECTION);
|
|
#endif /* HAVE_USB_HID_MOUSE */
|
|
|
|
/* Background reports */
|
|
pack_parameter(&report, 0, 1, USAGE_PAGE, HID_USAGE_PAGE_GENERIC_DEVICE_CONTROLS);
|
|
pack_parameter(&report, 0, 0, CONSUMER_USAGE, HID_GENERIC_DEVICE_BACKGROUND_CONTROLS);
|
|
pack_parameter(&report, 0, 1, COLLECTION, COLLECTION_APPLICATION);
|
|
pack_parameter(&report, 0, 1, REPORT_ID, REPORT_ID_BACKGROUND);
|
|
/* Padding */
|
|
pack_parameter(&report, 0, 0, CONSUMER_USAGE, HID_GENERIC_DEVICE_UNDEFINED);
|
|
pack_parameter(&report, 0, 1, LOGICAL_MINIMUM, 0);
|
|
pack_parameter(&report, 0, 1, LOGICAL_MAXIMUM, 255);
|
|
pack_parameter(&report, 0, 1, REPORT_SIZE, 8);
|
|
pack_parameter(&report, 0, 1, REPORT_COUNT, 1);
|
|
pack_parameter(&report, 0, 1, FEATURE, MAIN_ITEM_CONSTANT);
|
|
/* Battery percentage */
|
|
pack_parameter(&report, 0, 0, CONSUMER_USAGE, HID_GENERIC_DEVICE_BATTERY_STRENGTH);
|
|
pack_parameter(&report, 0, 1, LOGICAL_MINIMUM, 0);
|
|
pack_parameter(&report, 0, 1, LOGICAL_MAXIMUM, 100);
|
|
pack_parameter(&report, 0, 1, REPORT_SIZE, 8);
|
|
pack_parameter(&report, 0, 1, REPORT_COUNT, 1);
|
|
pack_parameter(&report, 0, 1, FEATURE, MAIN_ITEM_VARIABLE);
|
|
PACK_VAL(report, END_COLLECTION);
|
|
|
|
return (size_t)(report - dest);
|
|
}
|
|
|
|
static void descriptor_hid_get(unsigned char **dest)
|
|
{
|
|
hid_descriptor.wDescriptorLength0= descriptor_report_get(report_descriptor);
|
|
|
|
logf("hid: desc len %u", hid_descriptor.wDescriptorLength0);
|
|
buf_dump(report_descriptor, hid_descriptor.wDescriptorLength0, "desc");
|
|
|
|
PACK_DATA(dest, hid_descriptor);
|
|
}
|
|
|
|
int usb_hid_get_config_descriptor(unsigned char *dest, int max_packet_size)
|
|
{
|
|
(void)max_packet_size;
|
|
|
|
unsigned char *orig_dest = dest;
|
|
|
|
logf("hid: config desc.");
|
|
|
|
/* Interface descriptor */
|
|
interface_descriptor.bInterfaceNumber = usb_interface;
|
|
PACK_DATA(&dest, interface_descriptor);
|
|
|
|
/* HID descriptor */
|
|
descriptor_hid_get(&dest);
|
|
|
|
/* Endpoint descriptor */
|
|
endpoint_descriptor.wMaxPacketSize = 8;
|
|
endpoint_descriptor.bInterval = 8;
|
|
endpoint_descriptor.bEndpointAddress = ep_in;
|
|
PACK_DATA(&dest, endpoint_descriptor);
|
|
|
|
return (int)(dest - orig_dest);
|
|
}
|
|
|
|
void usb_hid_init_connection(void)
|
|
{
|
|
logf("hid: init connection");
|
|
active = true;
|
|
currently_sending = false;
|
|
}
|
|
|
|
/* called by usb_core_init() */
|
|
void usb_hid_init(void)
|
|
{
|
|
logf("hid: init");
|
|
|
|
for (int i = 0; i < HID_NUM_BUFFERS; i++)
|
|
send_buffer_len[i] = 0;
|
|
|
|
cur_buf_prepare = 0;
|
|
cur_buf_send = 0;
|
|
|
|
active = true;
|
|
currently_sending = false;
|
|
}
|
|
|
|
void usb_hid_disconnect(void)
|
|
{
|
|
logf("hid: disconnect");
|
|
active = false;
|
|
currently_sending = false;
|
|
}
|
|
|
|
/* called by usb_core_transfer_complete() */
|
|
void usb_hid_transfer_complete(int ep, int dir, int status, int length)
|
|
{
|
|
(void)ep;
|
|
(void)length;
|
|
|
|
logf("HID: transfer complete: %d %d %d %d",ep,dir,status,length);
|
|
if (dir == USB_DIR_IN && !status)
|
|
{
|
|
send_buffer_len[cur_buf_send] = 0;
|
|
HID_BUF_INC(cur_buf_send);
|
|
currently_sending = false;
|
|
usb_hid_try_send_drv();
|
|
}
|
|
}
|
|
|
|
/* The DAP is registered as a keyboard with several LEDs, therefore the OS sends
|
|
* LED report to notify the DAP whether Num Lock / Caps Lock etc. are enabled.
|
|
* In order to allow sending info to the DAP, the Set Report mechanism can be
|
|
* used by defining vendor specific output reports and send them from the host
|
|
* to the DAP using the host's custom driver */
|
|
static int usb_hid_set_report(struct usb_ctrlrequest *req, void *reqdata)
|
|
{
|
|
static unsigned char buf[64] USB_DEVBSS_ATTR __attribute__((aligned(32)));
|
|
int length;
|
|
|
|
if ((req->wValue >> 8) != REPORT_TYPE_OUTPUT)
|
|
{
|
|
logf("Unsupported report type");
|
|
return 1;
|
|
}
|
|
if ((req->wValue & 0xff) != REPORT_ID_KEYBOARD)
|
|
{
|
|
logf("Wrong report id");
|
|
return 2;
|
|
}
|
|
if (req->wIndex != (uint16_t)usb_interface)
|
|
{
|
|
logf("Wrong interface");
|
|
return 3;
|
|
}
|
|
length = req->wLength;
|
|
if (length != SET_REPORT_BUF_LEN)
|
|
{
|
|
logf("Wrong length");
|
|
return 4;
|
|
}
|
|
|
|
if(!reqdata) {
|
|
memset(buf, 0, length);
|
|
usb_drv_control_response(USB_CONTROL_RECEIVE, buf, length);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef LOGF_ENABLE
|
|
if (buf[1] & 0x01)
|
|
logf("Num Lock enabled");
|
|
if (buf[1] & 0x02)
|
|
logf("Caps Lock enabled");
|
|
if (buf[1] & 0x04)
|
|
logf("Scroll Lock enabled");
|
|
if (buf[1] & 0x08)
|
|
logf("Compose enabled");
|
|
if (buf[1] & 0x10)
|
|
logf("Kana enabled");
|
|
#endif
|
|
|
|
/* Defining other LEDs and setting them from the USB host (OS) can be used
|
|
* to send messages to the DAP */
|
|
usb_drv_control_response(USB_CONTROL_ACK, NULL, 0);
|
|
return 0;
|
|
}
|
|
|
|
static int usb_hid_get_report(struct usb_ctrlrequest *req, unsigned char* dest)
|
|
{
|
|
if ((req->wValue >> 8) != REPORT_TYPE_FEATURE)
|
|
{
|
|
logf("Unsupported report type");
|
|
return 1;
|
|
}
|
|
|
|
if ((req->wValue & 0xff) != REPORT_ID_BACKGROUND)
|
|
{
|
|
logf("Wrong report id");
|
|
return 2;
|
|
}
|
|
|
|
if (req->wIndex != (uint16_t)usb_interface)
|
|
{
|
|
logf("Wrong interface");
|
|
return 3;
|
|
}
|
|
|
|
if (req->wLength < GET_REPORT_BUF_LEN)
|
|
{
|
|
logf("Wrong length");
|
|
return 4;
|
|
}
|
|
|
|
dest[0] = 0;
|
|
dest[1] = battery_level();
|
|
usb_drv_control_response(USB_CONTROL_ACK, dest, 2);
|
|
return 0;
|
|
}
|
|
|
|
/* called by usb_core_control_request() */
|
|
bool usb_hid_control_request(struct usb_ctrlrequest *req, void *reqdata, unsigned char *dest)
|
|
{
|
|
(void)reqdata;
|
|
|
|
unsigned char *orig_dest = dest;
|
|
switch (req->bRequestType & USB_TYPE_MASK)
|
|
{
|
|
case USB_TYPE_STANDARD:
|
|
{
|
|
uint8_t type = req->wValue >> 8;
|
|
size_t len;
|
|
logf("hid: type %d %s", type, (type == USB_DT_HID) ? "hid" :
|
|
((type == USB_DT_REPORT) ? "report" : ""));
|
|
switch (type)
|
|
{
|
|
case USB_DT_HID:
|
|
descriptor_hid_get(&dest);
|
|
break;
|
|
case USB_DT_REPORT:
|
|
len = descriptor_report_get(report_descriptor);
|
|
memcpy(dest, &report_descriptor, len);
|
|
dest += len;
|
|
break;
|
|
}
|
|
|
|
if (dest != orig_dest)
|
|
{
|
|
usb_drv_control_response(USB_CONTROL_ACK, orig_dest, dest - orig_dest);
|
|
return true;
|
|
}
|
|
break;
|
|
}
|
|
|
|
case USB_TYPE_CLASS:
|
|
{
|
|
logf("req %d %s", req->bRequest,
|
|
(req->bRequest == USB_HID_SET_IDLE) ? "set idle" :
|
|
((req->bRequest == USB_HID_SET_REPORT) ? "set report" :
|
|
((req->bRequest == USB_HID_GET_REPORT) ? "get report" : "")));
|
|
|
|
int rc;
|
|
switch (req->bRequest)
|
|
{
|
|
case USB_HID_SET_REPORT:
|
|
rc = usb_hid_set_report(req, reqdata);
|
|
break;
|
|
case USB_HID_GET_REPORT:
|
|
rc = usb_hid_get_report(req, dest);
|
|
break;
|
|
case USB_HID_SET_IDLE:
|
|
usb_drv_control_response(USB_CONTROL_ACK, NULL, 0);
|
|
return true;
|
|
default:
|
|
/* all other requests are errors */
|
|
return false;
|
|
}
|
|
|
|
if(rc == 0)
|
|
return true;
|
|
}
|
|
|
|
case USB_TYPE_VENDOR:
|
|
logf("hid: unsup. ven. req");
|
|
break;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static void usb_hid_try_send_drv(void)
|
|
{
|
|
int rc;
|
|
int length = send_buffer_len[cur_buf_send];
|
|
|
|
if (!length)
|
|
return;
|
|
|
|
if (currently_sending)
|
|
{
|
|
logf("HID: Already sending");
|
|
return;
|
|
}
|
|
|
|
logf("HID: Sending %d bytes",length);
|
|
rc = usb_drv_send_nonblocking(ep_in, send_buffer[cur_buf_send], length);
|
|
currently_sending = true;
|
|
if (rc)
|
|
send_buffer_len[cur_buf_send] = 0;
|
|
}
|
|
|
|
static void usb_hid_queue(unsigned char *data, int length)
|
|
{
|
|
if (!active || length <= 0)
|
|
return;
|
|
|
|
/* Buffer overflow - item still in use */
|
|
if (send_buffer_len[cur_buf_prepare])
|
|
return;
|
|
|
|
/* Prepare buffer for sending */
|
|
if (length > HID_BUF_SIZE_MSG)
|
|
length = HID_BUF_SIZE_MSG;
|
|
memcpy(send_buffer[cur_buf_prepare], data, length);
|
|
send_buffer_len[cur_buf_prepare] = length;
|
|
|
|
HID_BUF_INC(cur_buf_prepare);
|
|
}
|
|
|
|
void usb_hid_send(usage_page_t usage_page, int id)
|
|
{
|
|
uint8_t length;
|
|
static unsigned char buf[HID_BUF_SIZE_CMD] USB_DEVBSS_ATTR
|
|
__attribute__((aligned(32)));
|
|
usb_hid_report_t *report = NULL;
|
|
|
|
for (uint8_t report_id = 1; report_id < REPORT_ID_COUNT; report_id++)
|
|
if (usb_hid_reports[report_id].usage_page == usage_page)
|
|
{
|
|
report = &usb_hid_reports[report_id];
|
|
buf[0] = report_id;
|
|
break;
|
|
}
|
|
|
|
if (!report)
|
|
{
|
|
logf("Unsupported usage_page");
|
|
return;
|
|
}
|
|
|
|
logf("Sending cmd 0x%x", id);
|
|
length = report->buf_set(&buf[1], id) + 1;
|
|
logf("length %u", length);
|
|
|
|
if (!length)
|
|
return;
|
|
|
|
/* Key pressed */
|
|
buf_dump(buf, length, "key press");
|
|
usb_hid_queue(buf, length);
|
|
|
|
if (report->is_key_released)
|
|
{
|
|
/* Key released */
|
|
memset(&buf[1], 0, length-1);
|
|
|
|
buf_dump(buf, length, "key release");
|
|
usb_hid_queue(buf, length);
|
|
}
|
|
|
|
usb_hid_try_send_drv();
|
|
}
|