c9f59e6f75
1. X5 lcd sleep 2. #define HAVE_LCD_ENABLE 3. add "backlight (on hold switch)" setting, adapted from FS #5735 Note that the while(1) yield ==> asm("halt") part is NOT commited here, I prefer it would be discussed separately. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10489 a1c6a512-1295-4272-9138-f99709370657
1059 lines
35 KiB
C
1059 lines
35 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2002 by Heikki Hannikainen, Uwe Freese
|
|
* Revisions copyright (C) 2005 by Gerald Van Baren
|
|
*
|
|
* All files in this archive are subject to the GNU General Public License.
|
|
* See the file COPYING in the source tree root for full license agreement.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "config.h"
|
|
#include "cpu.h"
|
|
#include "kernel.h"
|
|
#include "thread.h"
|
|
#include "system.h"
|
|
#include "debug.h"
|
|
#include "panic.h"
|
|
#include "adc.h"
|
|
#include "string.h"
|
|
#include "sprintf.h"
|
|
#include "ata.h"
|
|
#include "power.h"
|
|
#include "button.h"
|
|
#include "ata.h"
|
|
#include "audio.h"
|
|
#include "mp3_playback.h"
|
|
#include "usb.h"
|
|
#include "powermgmt.h"
|
|
#include "backlight.h"
|
|
#include "lcd.h"
|
|
#include "rtc.h"
|
|
#ifdef CONFIG_TUNER
|
|
#include "fmradio.h"
|
|
#endif
|
|
#ifdef HAVE_UDA1380
|
|
#include "uda1380.h"
|
|
#elif defined(HAVE_TLV320)
|
|
#include "tlv320.h"
|
|
#elif defined(HAVE_WM8758)
|
|
#include "wm8758.h"
|
|
#elif defined(HAVE_WM8975)
|
|
#include "wm8975.h"
|
|
#endif
|
|
#ifdef HAVE_LCD_BITMAP
|
|
#include "font.h"
|
|
#endif
|
|
#include "logf.h"
|
|
#include "lcd-remote.h"
|
|
#ifdef SIMULATOR
|
|
#include <time.h>
|
|
#endif
|
|
|
|
/*
|
|
* Define DEBUG_FILE to create a csv (spreadsheet) with battery information
|
|
* in it (one sample per minute). This is only for very low level debug.
|
|
*/
|
|
#undef DEBUG_FILE
|
|
#if defined(DEBUG_FILE) && (CONFIG_CHARGING == CHARGING_CONTROL)
|
|
#include "file.h"
|
|
#define DEBUG_FILE_NAME "/powermgmt.csv"
|
|
#define DEBUG_MESSAGE_LEN 133
|
|
static char debug_message[DEBUG_MESSAGE_LEN];
|
|
#define DEBUG_STACK ((0x1000)/sizeof(long))
|
|
static int fd; /* write debug information to this file */
|
|
static int wrcount;
|
|
#else
|
|
#define DEBUG_STACK 0
|
|
#endif
|
|
|
|
static int shutdown_timeout = 0;
|
|
|
|
#ifdef SIMULATOR /***********************************************************/
|
|
|
|
#define TIME2CHANGE 10 /* change levels every 10 seconds */
|
|
#define BATT_MINCVOLT 250 /* minimum centivolts of battery */
|
|
#define BATT_MAXCVOLT 450 /* maximum centivolts of battery */
|
|
#define BATT_MAXRUNTIME (10 * 60) /* maximum runtime with full battery in minutes */
|
|
|
|
static unsigned int batt_centivolts = (unsigned int)BATT_MAXCVOLT;
|
|
static int batt_level = 100; /* battery capacity level in percent */
|
|
static int batt_time = BATT_MAXRUNTIME; /* estimated remaining time in minutes */
|
|
static time_t last_change = 0;
|
|
|
|
static void battery_status_update(void)
|
|
{
|
|
time_t now;
|
|
|
|
time(&now);
|
|
if (last_change < (now - TIME2CHANGE)) {
|
|
last_change = now;
|
|
|
|
/* change the values: */
|
|
batt_centivolts -= (unsigned int)(BATT_MAXCVOLT - BATT_MINCVOLT) / 11;
|
|
if (batt_centivolts < (unsigned int)BATT_MINCVOLT)
|
|
batt_centivolts = (unsigned int)BATT_MAXCVOLT;
|
|
|
|
batt_level = 100 * (batt_centivolts - BATT_MINCVOLT) / (BATT_MAXCVOLT - BATT_MINCVOLT);
|
|
batt_time = batt_level * BATT_MAXRUNTIME / 100;
|
|
}
|
|
}
|
|
|
|
unsigned int battery_voltage(void)
|
|
{
|
|
battery_status_update();
|
|
return batt_centivolts;
|
|
}
|
|
|
|
int battery_level(void)
|
|
{
|
|
battery_status_update();
|
|
return batt_level;
|
|
}
|
|
|
|
int battery_time(void)
|
|
{
|
|
battery_status_update();
|
|
return batt_time;
|
|
}
|
|
|
|
bool battery_level_safe(void)
|
|
{
|
|
return battery_level() >= 10;
|
|
}
|
|
|
|
void set_poweroff_timeout(int timeout)
|
|
{
|
|
(void)timeout;
|
|
}
|
|
|
|
void set_battery_capacity(int capacity)
|
|
{
|
|
(void)capacity;
|
|
}
|
|
|
|
void reset_poweroff_timer(void)
|
|
{
|
|
}
|
|
|
|
|
|
#else /* not SIMULATOR ******************************************************/
|
|
|
|
static const int poweroff_idle_timeout_value[15] =
|
|
{
|
|
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 30, 45, 60
|
|
};
|
|
|
|
static const unsigned int battery_level_dangerous[BATTERY_TYPES_COUNT] =
|
|
{
|
|
#if CONFIG_BATTERY == BATT_LIION2200 /* FM Recorder, LiIon */
|
|
280
|
|
#elif CONFIG_BATTERY == BATT_3AAA /* Ondio */
|
|
310, 345 /* alkaline, NiHM */
|
|
#elif CONFIG_BATTERY == BATT_LIPOL1300 /* iRiver H1x0 */
|
|
339
|
|
#else /* Player/recorder, NiMH */
|
|
475
|
|
#endif
|
|
};
|
|
|
|
static const short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] =
|
|
/* voltages (centivolt) of 0%, 10%, ... 100% when charging disabled */
|
|
{
|
|
#if CONFIG_BATTERY == BATT_LIION2200
|
|
/* measured values */
|
|
{ 260, 285, 295, 303, 311, 320, 330, 345, 360, 380, 400 }
|
|
#elif CONFIG_BATTERY == BATT_3AAA
|
|
/* measured values */
|
|
{ 280, 325, 341, 353, 364, 374, 385, 395, 409, 427, 475 }, /* alkaline */
|
|
{ 310, 355, 363, 369, 372, 374, 376, 378, 380, 386, 405 } /* NiMH */
|
|
#elif CONFIG_BATTERY == BATT_LIPOL1300
|
|
/* Below 337 the backlight starts flickering during HD access */
|
|
/* Calibrated for Ionity 1900 mAh battery. If necessary, re-calibrate
|
|
* for the 1300 mAh stock battery. */
|
|
// { 337, 358, 365, 369, 372, 377, 383, 389, 397, 406, 413 }
|
|
{ 337, 366, 372, 374, 378, 381, 385, 392, 399, 408, 417 }
|
|
#else /* NiMH */
|
|
/* original values were taken directly after charging, but it should show
|
|
100% after turning off the device for some hours, too */
|
|
{ 450, 481, 491, 497, 503, 507, 512, 514, 517, 525, 540 }
|
|
/* orig. values: ...,528,560 */
|
|
#endif
|
|
};
|
|
|
|
#ifdef CONFIG_CHARGING
|
|
charger_input_state_type charger_input_state IDATA_ATTR;
|
|
|
|
/* voltages (centivolt) of 0%, 10%, ... 100% when charging enabled */
|
|
static const short percent_to_volt_charge[11] =
|
|
{
|
|
#if CONFIG_BATTERY == BATT_LIPOL1300
|
|
/* Calibrated for 1900 mAh Ionity battery (estimated 90% charge when
|
|
entering in trickle-charging). We will never reach 100%. */
|
|
340, 390, 394, 399, 400, 404, 407, 413, 417, 422, 426
|
|
#else
|
|
/* values guessed, see
|
|
http://www.seattlerobotics.org/encoder/200210/LiIon2.pdf until someone
|
|
measures voltages over a charging cycle */
|
|
476, 544, 551, 556, 561, 564, 566, 576, 582, 584, 585 /* NiMH */
|
|
#endif
|
|
};
|
|
#endif /* CONFIG_CHARGING */
|
|
|
|
#if CONFIG_CHARGING >= CHARGING_MONITOR
|
|
charge_state_type charge_state; /* charging mode */
|
|
#endif
|
|
|
|
#if CONFIG_CHARGING == CHARGING_CONTROL
|
|
int long_delta; /* long term delta battery voltage */
|
|
int short_delta; /* short term delta battery voltage */
|
|
bool disk_activity_last_cycle = false; /* flag set to aid charger time
|
|
* calculation */
|
|
char power_message[POWER_MESSAGE_LEN] = ""; /* message that's shown in
|
|
debug menu */
|
|
/* percentage at which charging
|
|
starts */
|
|
int powermgmt_last_cycle_startstop_min = 0; /* how many minutes ago was the
|
|
charging started or
|
|
stopped? */
|
|
int powermgmt_last_cycle_level = 0; /* which level had the
|
|
batteries at this time? */
|
|
int trickle_sec = 0; /* how many seconds should the
|
|
charger be enabled per
|
|
minute for trickle
|
|
charging? */
|
|
int pid_p = 0; /* PID proportional term */
|
|
int pid_i = 0; /* PID integral term */
|
|
#endif /* CONFIG_CHARGING == CHARGING_CONTROL */
|
|
|
|
/*
|
|
* Average battery voltage and charger voltage, filtered via a digital
|
|
* exponential filter.
|
|
*/
|
|
static unsigned int battery_centivolts;/* filtered battery voltage, centvolts */
|
|
static unsigned int avgbat; /* average battery voltage (filtering) */
|
|
#define BATT_AVE_SAMPLES 32 /* filter constant / @ 2Hz sample rate */
|
|
|
|
/* battery level (0-100%) of this minute, updated once per minute */
|
|
static int battery_percent = -1;
|
|
static int battery_capacity = BATTERY_CAPACITY_DEFAULT; /* default value, mAh */
|
|
static int battery_type = 0;
|
|
|
|
/* Power history: power_history[0] is the newest sample */
|
|
unsigned short power_history[POWER_HISTORY_LEN];
|
|
|
|
static char power_stack[DEFAULT_STACK_SIZE + DEBUG_STACK];
|
|
static const char power_thread_name[] = "power";
|
|
|
|
static int poweroff_timeout = 0;
|
|
static int powermgmt_est_runningtime_min = -1;
|
|
|
|
static bool sleeptimer_active = false;
|
|
static long sleeptimer_endtick;
|
|
|
|
static long last_event_tick;
|
|
|
|
static void battery_status_update(void);
|
|
static int runcurrent(void);
|
|
|
|
unsigned int battery_voltage(void)
|
|
{
|
|
return battery_centivolts;
|
|
}
|
|
|
|
void reset_poweroff_timer(void)
|
|
{
|
|
last_event_tick = current_tick;
|
|
}
|
|
|
|
#if BATTERY_TYPES_COUNT > 1
|
|
void set_battery_type(int type)
|
|
{
|
|
if (type != battery_type) {
|
|
battery_type = type;
|
|
battery_status_update(); /* recalculate the battery status */
|
|
}
|
|
}
|
|
#endif
|
|
|
|
void set_battery_capacity(int capacity)
|
|
{
|
|
battery_capacity = capacity;
|
|
if (battery_capacity > BATTERY_CAPACITY_MAX)
|
|
battery_capacity = BATTERY_CAPACITY_MAX;
|
|
if (battery_capacity < BATTERY_CAPACITY_MIN)
|
|
battery_capacity = BATTERY_CAPACITY_MIN;
|
|
battery_status_update(); /* recalculate the battery status */
|
|
}
|
|
|
|
int battery_time(void)
|
|
{
|
|
return powermgmt_est_runningtime_min;
|
|
}
|
|
|
|
/* Returns battery level in percent */
|
|
int battery_level(void)
|
|
{
|
|
return battery_percent;
|
|
}
|
|
|
|
/* Tells if the battery level is safe for disk writes */
|
|
bool battery_level_safe(void)
|
|
{
|
|
return battery_centivolts > battery_level_dangerous[battery_type];
|
|
}
|
|
|
|
void set_poweroff_timeout(int timeout)
|
|
{
|
|
poweroff_timeout = timeout;
|
|
}
|
|
|
|
void set_sleep_timer(int seconds)
|
|
{
|
|
if(seconds) {
|
|
sleeptimer_active = true;
|
|
sleeptimer_endtick = current_tick + seconds * HZ;
|
|
}
|
|
else {
|
|
sleeptimer_active = false;
|
|
sleeptimer_endtick = 0;
|
|
}
|
|
}
|
|
|
|
int get_sleep_timer(void)
|
|
{
|
|
if(sleeptimer_active)
|
|
return (sleeptimer_endtick - current_tick) / HZ;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
/* look into the percent_to_volt_* table and get a realistic battery level
|
|
percentage */
|
|
static int voltage_to_percent(int voltage, const short* table)
|
|
{
|
|
if (voltage <= table[0])
|
|
return 0;
|
|
else
|
|
if (voltage >= table[10])
|
|
return 100;
|
|
else {
|
|
/* search nearest value */
|
|
int i = 0;
|
|
while ((i < 10) && (table[i+1] < voltage))
|
|
i++;
|
|
/* interpolate linear between the smaller and greater value */
|
|
return (i * 10) /* Tens digit, 10% per entry */
|
|
+ (((voltage - table[i]) * 10)
|
|
/ (table[i+1] - table[i])); /* Ones digit: interpolated */
|
|
}
|
|
}
|
|
|
|
/* update battery level and estimated runtime, called once per minute or
|
|
* when battery capacity / type settings are changed */
|
|
static void battery_status_update(void)
|
|
{
|
|
int level;
|
|
|
|
#if CONFIG_CHARGING >= CHARGING_MONITOR
|
|
if (charge_state == DISCHARGING) {
|
|
level = voltage_to_percent(battery_centivolts,
|
|
percent_to_volt_discharge[battery_type]);
|
|
}
|
|
else if (charge_state == CHARGING) {
|
|
/* battery level is defined to be < 100% until charging is finished */
|
|
level = MIN(voltage_to_percent(battery_centivolts,
|
|
percent_to_volt_charge), 99);
|
|
}
|
|
else { /* in topoff/trickle charge, the battery is by definition 100% full */
|
|
level = 100;
|
|
}
|
|
#else
|
|
/* always use the discharge table */
|
|
level = voltage_to_percent(battery_centivolts,
|
|
percent_to_volt_discharge[battery_type]);
|
|
#endif
|
|
|
|
#ifndef HAVE_MMC /* this adjustment is only needed for HD based */
|
|
if (battery_percent == -1) { /* first run of this procedure */
|
|
/* The battery voltage is usually a little lower directly after
|
|
turning on, because the disk was used heavily. Raise it by 5. % */
|
|
level = (level > 95) ? 100 : level + 5;
|
|
}
|
|
#endif
|
|
battery_percent = level;
|
|
|
|
/* calculate estimated remaining running time */
|
|
/* discharging: remaining running time */
|
|
/* charging: remaining charging time */
|
|
#if CONFIG_CHARGING >= CHARGING_MONITOR
|
|
if (charge_state == CHARGING) {
|
|
powermgmt_est_runningtime_min = (100 - level) * battery_capacity / 100
|
|
* 60 / (CURRENT_MAX_CHG - runcurrent());
|
|
}
|
|
else
|
|
#endif
|
|
{
|
|
powermgmt_est_runningtime_min = level * battery_capacity / 100
|
|
* 60 / runcurrent();
|
|
}
|
|
}
|
|
|
|
/*
|
|
* We shut off in the following cases:
|
|
* 1) The unit is idle, not playing music
|
|
* 2) The unit is playing music, but is paused
|
|
*
|
|
* We do not shut off in the following cases:
|
|
* 1) The USB is connected
|
|
* 2) The charger is connected
|
|
* 3) We are recording, or recording with pause
|
|
*/
|
|
static void handle_auto_poweroff(void)
|
|
{
|
|
long timeout = poweroff_idle_timeout_value[poweroff_timeout]*60*HZ;
|
|
int audio_stat = audio_status();
|
|
|
|
#ifdef CONFIG_CHARGING
|
|
/*
|
|
* Inhibit shutdown as long as the charger is plugged in. If it is
|
|
* unplugged, wait for a timeout period and then shut down.
|
|
*/
|
|
if(charger_input_state == CHARGER || audio_stat == AUDIO_STATUS_PLAY) {
|
|
last_event_tick = current_tick;
|
|
}
|
|
#endif
|
|
|
|
if(timeout &&
|
|
#ifdef CONFIG_TUNER
|
|
(!radio_powered()) &&
|
|
#endif
|
|
!usb_inserted() &&
|
|
((audio_stat == 0) ||
|
|
((audio_stat == (AUDIO_STATUS_PLAY | AUDIO_STATUS_PAUSE)) &&
|
|
!sleeptimer_active)))
|
|
{
|
|
if(TIME_AFTER(current_tick, last_event_tick + timeout) &&
|
|
TIME_AFTER(current_tick, last_disk_activity + timeout))
|
|
{
|
|
sys_poweroff();
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Handle sleeptimer */
|
|
if(sleeptimer_active && !usb_inserted())
|
|
{
|
|
if(TIME_AFTER(current_tick, sleeptimer_endtick))
|
|
{
|
|
audio_stop();
|
|
#if defined(CONFIG_CHARGING) && !defined(HAVE_POWEROFF_WHILE_CHARGING)
|
|
if((charger_input_state == CHARGER) ||
|
|
(charger_input_state == CHARGER_PLUGGED))
|
|
{
|
|
DEBUGF("Sleep timer timeout. Stopping...\n");
|
|
set_sleep_timer(0);
|
|
backlight_off(); /* Nighty, nighty... */
|
|
}
|
|
else
|
|
#endif
|
|
{
|
|
DEBUGF("Sleep timer timeout. Shutting off...\n");
|
|
sys_poweroff();
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Estimate how much current we are drawing just to run.
|
|
*/
|
|
static int runcurrent(void)
|
|
{
|
|
int current;
|
|
|
|
#if MEM == 8 && !defined(HAVE_MMC)
|
|
/* assuming 192 kbps, the running time is 22% longer with 8MB */
|
|
current = (CURRENT_NORMAL*100/122);
|
|
#else
|
|
current = CURRENT_NORMAL;
|
|
#endif /* MEM == 8 */
|
|
|
|
if(usb_inserted()
|
|
#if defined(HAVE_USB_POWER)
|
|
#if (CURRENT_USB < CURRENT_NORMAL)
|
|
|| usb_powered()
|
|
#else
|
|
&& !usb_powered()
|
|
#endif
|
|
#endif
|
|
)
|
|
{
|
|
current = CURRENT_USB;
|
|
}
|
|
|
|
#if defined(CONFIG_BACKLIGHT) && !defined(BOOTLOADER)
|
|
if (backlight_get_current_timeout() == 0) /* LED always on */
|
|
current += CURRENT_BACKLIGHT;
|
|
#endif
|
|
|
|
return(current);
|
|
}
|
|
|
|
|
|
/* Check to see whether or not we've received an alarm in the last second */
|
|
#ifdef HAVE_ALARM_MOD
|
|
static void power_thread_rtc_process(void)
|
|
{
|
|
if (rtc_check_alarm_flag()) {
|
|
rtc_enable_alarm(false);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* This function is called to do the relativly long sleep waits from within the
|
|
* main power_thread loop while at the same time servicing any other periodic
|
|
* functions in the power thread which need to be called at a faster periodic
|
|
* rate than the slow periodic rate of the main power_thread loop.
|
|
*
|
|
* While we are waiting for the time to expire, we average the battery
|
|
* voltages.
|
|
*/
|
|
static void power_thread_sleep(int ticks)
|
|
{
|
|
int small_ticks;
|
|
|
|
while (ticks > 0) {
|
|
|
|
#ifdef CONFIG_CHARGING
|
|
/*
|
|
* Detect charger plugged/unplugged transitions. On a plugged or
|
|
* unplugged event, we return immediately, run once through the main
|
|
* loop (including the subroutines), and end up back here where we
|
|
* transition to the appropriate steady state charger on/off state.
|
|
*/
|
|
if(charger_inserted()
|
|
#ifdef HAVE_USB_POWER
|
|
|| usb_powered()
|
|
#endif
|
|
) {
|
|
switch(charger_input_state) {
|
|
case NO_CHARGER:
|
|
case CHARGER_UNPLUGGED:
|
|
charger_input_state = CHARGER_PLUGGED;
|
|
return;
|
|
case CHARGER_PLUGGED:
|
|
queue_broadcast(SYS_CHARGER_CONNECTED, NULL);
|
|
charger_input_state = CHARGER;
|
|
break;
|
|
case CHARGER:
|
|
break;
|
|
}
|
|
} else { /* charger not inserted */
|
|
switch(charger_input_state) {
|
|
case NO_CHARGER:
|
|
break;
|
|
case CHARGER_UNPLUGGED:
|
|
queue_broadcast(SYS_CHARGER_DISCONNECTED, NULL);
|
|
charger_input_state = NO_CHARGER;
|
|
break;
|
|
case CHARGER_PLUGGED:
|
|
case CHARGER:
|
|
charger_input_state = CHARGER_UNPLUGGED;
|
|
return;
|
|
}
|
|
}
|
|
#endif
|
|
#if CONFIG_CHARGING == CHARGING_MONITOR
|
|
switch (charger_input_state) {
|
|
case CHARGER_UNPLUGGED:
|
|
case NO_CHARGER:
|
|
charge_state = DISCHARGING;
|
|
break;
|
|
case CHARGER_PLUGGED:
|
|
case CHARGER:
|
|
if (charging_state()) {
|
|
charge_state = CHARGING;
|
|
} else {
|
|
charge_state = DISCHARGING;
|
|
}
|
|
break;
|
|
}
|
|
|
|
#endif /* CONFIG_CHARGING == CHARGING_MONITOR */
|
|
|
|
small_ticks = MIN(HZ/2, ticks);
|
|
sleep(small_ticks);
|
|
ticks -= small_ticks;
|
|
|
|
/* If the power off timeout expires, the main thread has failed
|
|
to shut down the system, and we need to force a power off */
|
|
if(shutdown_timeout) {
|
|
shutdown_timeout -= small_ticks;
|
|
if(shutdown_timeout <= 0)
|
|
power_off();
|
|
}
|
|
|
|
#ifdef HAVE_ALARM_MOD
|
|
power_thread_rtc_process();
|
|
#endif
|
|
|
|
/*
|
|
* Do a digital exponential filter. We don't sample the battery if
|
|
* the disk is spinning unless we are in USB mode (the disk will most
|
|
* likely always be spinning in USB mode).
|
|
*/
|
|
if (!ata_disk_is_active() || usb_inserted()) {
|
|
avgbat = avgbat - (avgbat / BATT_AVE_SAMPLES) +
|
|
adc_read(ADC_UNREG_POWER) * BATTERY_SCALE_FACTOR;
|
|
/*
|
|
* battery_centivolts is the centivolt-scaled filtered battery value.
|
|
*/
|
|
battery_centivolts = avgbat / BATT_AVE_SAMPLES / 10000;
|
|
|
|
/* update battery status every time an update is available */
|
|
battery_status_update();
|
|
|
|
}
|
|
#if CONFIG_CHARGING == CHARGING_CONTROL
|
|
if (ata_disk_is_active()) {
|
|
/* flag hdd use for charging calculation */
|
|
disk_activity_last_cycle = true;
|
|
}
|
|
#endif
|
|
#if defined(DEBUG_FILE) && (CONFIG_CHARGING == CHARGING_CONTROL)
|
|
/*
|
|
* If we have a lot of pending writes or if the disk is spining,
|
|
* fsync the debug log file.
|
|
*/
|
|
if((wrcount > 10) ||
|
|
((wrcount > 0) && ata_disk_is_active())) {
|
|
fsync(fd);
|
|
wrcount = 0;
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* This power thread maintains a history of battery voltage
|
|
* and implements a charging algorithm.
|
|
* For a complete description of the charging algorithm read
|
|
* docs/CHARGING_ALGORITHM.
|
|
*/
|
|
|
|
static void power_thread(void)
|
|
{
|
|
int i;
|
|
short *phps, *phpd; /* power history rotation pointers */
|
|
#if CONFIG_CHARGING == CHARGING_CONTROL
|
|
unsigned int target_voltage = TRICKLE_VOLTAGE; /* desired topoff/trickle
|
|
* voltage level */
|
|
int charge_max_time_idle = 0; /* max. charging duration, calculated at
|
|
* beginning of charging */
|
|
int charge_max_time_now = 0; /* max. charging duration including
|
|
* hdd activity */
|
|
int minutes_disk_activity = 0; /* count minutes of hdd use during
|
|
* charging */
|
|
int last_disk_activity = CHARGE_END_LONGD + 1; /* last hdd use x mins ago */
|
|
#endif
|
|
|
|
/* initialize the voltages for the exponential filter */
|
|
|
|
avgbat = adc_read(ADC_UNREG_POWER) * BATTERY_SCALE_FACTOR *
|
|
BATT_AVE_SAMPLES;
|
|
battery_centivolts = avgbat / BATT_AVE_SAMPLES / 10000;
|
|
|
|
#if defined(DEBUG_FILE) && (CONFIG_CHARGING == CHARGING_CONTROL)
|
|
fd = -1;
|
|
wrcount = 0;
|
|
#endif
|
|
|
|
while (1)
|
|
{
|
|
/* rotate the power history */
|
|
phpd = &power_history[POWER_HISTORY_LEN - 1];
|
|
phps = phpd - 1;
|
|
for (i = 0; i < POWER_HISTORY_LEN-1; i++)
|
|
*phpd-- = *phps--;
|
|
|
|
/* insert new value at the start, in centivolts 8-) */
|
|
power_history[0] = battery_centivolts;
|
|
|
|
#if CONFIG_CHARGING == CHARGING_CONTROL
|
|
if (charger_input_state == CHARGER_PLUGGED) {
|
|
pid_p = 0;
|
|
pid_i = 0;
|
|
snprintf(power_message, POWER_MESSAGE_LEN, "Charger plugged in");
|
|
/*
|
|
* The charger was just plugged in. If the battery level is
|
|
* nearly charged, just trickle. If the battery is low, start
|
|
* a full charge cycle. If the battery level is in between,
|
|
* top-off and then trickle.
|
|
*/
|
|
if(battery_percent > START_TOPOFF_CHG) {
|
|
powermgmt_last_cycle_level = battery_percent;
|
|
powermgmt_last_cycle_startstop_min = 0;
|
|
if(battery_percent >= START_TRICKLE_CHG) {
|
|
charge_state = TRICKLE;
|
|
target_voltage = TRICKLE_VOLTAGE;
|
|
} else {
|
|
charge_state = TOPOFF;
|
|
target_voltage = TOPOFF_VOLTAGE;
|
|
}
|
|
} else {
|
|
/*
|
|
* Start the charger full strength
|
|
*/
|
|
i = CHARGE_MAX_TIME_1500 * battery_capacity / 1500;
|
|
charge_max_time_idle =
|
|
i * (100 + 35 - battery_percent) / 100;
|
|
if (charge_max_time_idle > i) {
|
|
charge_max_time_idle = i;
|
|
}
|
|
charge_max_time_now = charge_max_time_idle;
|
|
|
|
snprintf(power_message, POWER_MESSAGE_LEN,
|
|
"ChgAt %d%% max %dm", battery_level(),
|
|
charge_max_time_now);
|
|
|
|
/* enable the charger after the max time calc is done,
|
|
because battery_level depends on if the charger is
|
|
on */
|
|
DEBUGF("power: charger inserted and battery"
|
|
" not full, charging\n");
|
|
powermgmt_last_cycle_level = battery_percent;
|
|
powermgmt_last_cycle_startstop_min = 0;
|
|
trickle_sec = 60;
|
|
long_delta = short_delta = 999999;
|
|
charge_state = CHARGING;
|
|
}
|
|
}
|
|
if (charge_state == CHARGING) {
|
|
/* alter charge time max length with extra disk use */
|
|
if (disk_activity_last_cycle) {
|
|
minutes_disk_activity++;
|
|
charge_max_time_now = charge_max_time_idle +
|
|
(minutes_disk_activity * 2 / 5);
|
|
disk_activity_last_cycle = false;
|
|
last_disk_activity = 0;
|
|
} else {
|
|
last_disk_activity++;
|
|
}
|
|
/*
|
|
* Check the delta voltage over the last X minutes so we can do
|
|
* our end-of-charge logic based on the battery level change.
|
|
*(no longer use minimum time as logic for charge end has 50
|
|
* minutes minimum charge built in)
|
|
*/
|
|
if (powermgmt_last_cycle_startstop_min > CHARGE_END_SHORTD) {
|
|
short_delta = power_history[0] -
|
|
power_history[CHARGE_END_SHORTD - 1];
|
|
}
|
|
|
|
if (powermgmt_last_cycle_startstop_min > CHARGE_END_LONGD) {
|
|
/*
|
|
* Scan the history: the points where measurement is taken need to
|
|
* be fairly static. (check prior to short delta 'area')
|
|
* (also only check first and last 10 cycles - delta in middle OK)
|
|
*/
|
|
long_delta = power_history[0] -
|
|
power_history[CHARGE_END_LONGD - 1];
|
|
|
|
for(i = CHARGE_END_SHORTD; i < CHARGE_END_SHORTD + 10; i++) {
|
|
if(((power_history[i] - power_history[i+1]) > 5) ||
|
|
((power_history[i] - power_history[i+1]) < -5)) {
|
|
long_delta = 777777;
|
|
break;
|
|
}
|
|
}
|
|
for(i = CHARGE_END_LONGD - 11; i < CHARGE_END_LONGD - 1 ; i++) {
|
|
if(((power_history[i] - power_history[i+1]) > 5) ||
|
|
((power_history[i] - power_history[i+1]) < -5)) {
|
|
long_delta = 888888;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
snprintf(power_message, POWER_MESSAGE_LEN,
|
|
"Chg %dm, max %dm", powermgmt_last_cycle_startstop_min,
|
|
charge_max_time_now);
|
|
/*
|
|
* End of charge criteria (any qualify):
|
|
* 1) Charged a long time
|
|
* 2) DeltaV went negative for a short time ( & long delta static)
|
|
* 3) DeltaV was negative over a longer period (no disk use only)
|
|
* Note: short_delta and long_delta are centivolts
|
|
*/
|
|
if ((powermgmt_last_cycle_startstop_min >= charge_max_time_now) ||
|
|
(short_delta <= -5 && long_delta < 5 ) || (long_delta < -2 &&
|
|
last_disk_activity > CHARGE_END_LONGD)) {
|
|
if (powermgmt_last_cycle_startstop_min > charge_max_time_now) {
|
|
DEBUGF("power: powermgmt_last_cycle_startstop_min > charge_max_time_now, "
|
|
"enough!\n");
|
|
/*
|
|
*have charged too long and deltaV detection did not
|
|
*work!
|
|
*/
|
|
snprintf(power_message, POWER_MESSAGE_LEN,
|
|
"Chg tmout %d min", charge_max_time_now);
|
|
/*
|
|
* Switch to trickle charging. We skip the top-off
|
|
* since we've effectively done the top-off operation
|
|
* already since we charged for the maximum full
|
|
* charge time.
|
|
*/
|
|
powermgmt_last_cycle_level = battery_percent;
|
|
powermgmt_last_cycle_startstop_min = 0;
|
|
charge_state = TRICKLE;
|
|
|
|
/*
|
|
* set trickle charge target to a relative voltage instead
|
|
* of an arbitrary value - the fully charged voltage may
|
|
* vary according to ambient temp, battery condition etc
|
|
* trickle target is -0.15v from full voltage acheived
|
|
* topup target is -0.05v from full voltage
|
|
*/
|
|
target_voltage = power_history[0] - 15;
|
|
|
|
} else {
|
|
if(short_delta <= -5) {
|
|
DEBUGF("power: short-term negative"
|
|
" delta, enough!\n");
|
|
snprintf(power_message, POWER_MESSAGE_LEN,
|
|
"end negd %d %dmin", short_delta,
|
|
powermgmt_last_cycle_startstop_min);
|
|
target_voltage = power_history[CHARGE_END_SHORTD - 1]
|
|
- 5;
|
|
} else {
|
|
DEBUGF("power: long-term small "
|
|
"positive delta, enough!\n");
|
|
snprintf(power_message, POWER_MESSAGE_LEN,
|
|
"end lowd %d %dmin", long_delta,
|
|
powermgmt_last_cycle_startstop_min);
|
|
target_voltage = power_history[CHARGE_END_LONGD - 1]
|
|
- 5;
|
|
}
|
|
/*
|
|
* Switch to top-off charging.
|
|
*/
|
|
powermgmt_last_cycle_level = battery_percent;
|
|
powermgmt_last_cycle_startstop_min = 0;
|
|
charge_state = TOPOFF;
|
|
}
|
|
}
|
|
}
|
|
else if (charge_state != DISCHARGING) /* top off or trickle */
|
|
{
|
|
/*
|
|
*Time to switch from topoff to trickle?
|
|
*/
|
|
if ((charge_state == TOPOFF) &&
|
|
(powermgmt_last_cycle_startstop_min > TOPOFF_MAX_TIME))
|
|
{
|
|
powermgmt_last_cycle_level = battery_percent;
|
|
powermgmt_last_cycle_startstop_min = 0;
|
|
charge_state = TRICKLE;
|
|
target_voltage = target_voltage - 10;
|
|
}
|
|
/*
|
|
* Adjust trickle charge time (proportional and integral terms).
|
|
* Note: I considered setting the level higher if the USB is
|
|
* plugged in, but it doesn't appear to be necessary and will
|
|
* generate more heat [gvb].
|
|
*/
|
|
|
|
pid_p = target_voltage - battery_centivolts;
|
|
if((pid_p > PID_DEADZONE) || (pid_p < -PID_DEADZONE))
|
|
pid_p = pid_p * PID_PCONST;
|
|
else
|
|
pid_p = 0;
|
|
if(battery_centivolts < target_voltage) {
|
|
if(pid_i < 60) {
|
|
pid_i++; /* limit so it doesn't "wind up" */
|
|
}
|
|
} else {
|
|
if(pid_i > 0) {
|
|
pid_i--; /* limit so it doesn't "wind up" */
|
|
}
|
|
}
|
|
|
|
trickle_sec = pid_p + pid_i;
|
|
|
|
if(trickle_sec > 60) {
|
|
trickle_sec = 60;
|
|
}
|
|
if(trickle_sec < 0) {
|
|
trickle_sec = 0;
|
|
}
|
|
|
|
} else if (charge_state == DISCHARGING) {
|
|
trickle_sec = 0;
|
|
/*
|
|
* The charger is enabled here only in one case: if it was
|
|
* turned on at boot time (power_init). Turn it off now.
|
|
*/
|
|
if (charger_enabled)
|
|
charger_enable(false);
|
|
}
|
|
|
|
if (charger_input_state == CHARGER_UNPLUGGED) {
|
|
/*
|
|
* The charger was just unplugged.
|
|
*/
|
|
DEBUGF("power: charger disconnected, disabling\n");
|
|
|
|
charger_enable(false);
|
|
powermgmt_last_cycle_level = battery_percent;
|
|
powermgmt_last_cycle_startstop_min = 0;
|
|
trickle_sec = 0;
|
|
pid_p = 0;
|
|
pid_i = 0;
|
|
charge_state = DISCHARGING;
|
|
snprintf(power_message, POWER_MESSAGE_LEN, "Charger: discharge");
|
|
}
|
|
|
|
#endif /* CONFIG_CHARGING == CHARGING_CONTROL */
|
|
|
|
/* sleep for a minute */
|
|
|
|
#if CONFIG_CHARGING == CHARGING_CONTROL
|
|
if(trickle_sec > 0) {
|
|
charger_enable(true);
|
|
power_thread_sleep(HZ * trickle_sec);
|
|
}
|
|
if(trickle_sec < 60)
|
|
charger_enable(false);
|
|
power_thread_sleep(HZ * (60 - trickle_sec));
|
|
#else
|
|
power_thread_sleep(HZ * 60);
|
|
#endif
|
|
|
|
#if defined(DEBUG_FILE) && (CONFIG_CHARGING == CHARGING_CONTROL)
|
|
if(usb_inserted()) {
|
|
if(fd >= 0) {
|
|
/* It is probably too late to close the file but we can try...*/
|
|
close(fd);
|
|
fd = -1;
|
|
}
|
|
} else {
|
|
if(fd < 0) {
|
|
fd = open(DEBUG_FILE_NAME, O_WRONLY | O_APPEND | O_CREAT);
|
|
if(fd >= 0) {
|
|
snprintf(debug_message, DEBUG_MESSAGE_LEN,
|
|
"cycle_min, bat_centivolts, bat_percent, chgr_state, charge_state, pid_p, pid_i, trickle_sec\n");
|
|
write(fd, debug_message, strlen(debug_message));
|
|
wrcount = 99; /* force a flush */
|
|
}
|
|
}
|
|
if(fd >= 0) {
|
|
snprintf(debug_message, DEBUG_MESSAGE_LEN,
|
|
"%d, %d, %d, %d, %d, %d, %d, %d\n",
|
|
powermgmt_last_cycle_startstop_min, battery_centivolts,
|
|
battery_percent, charger_input_state, charge_state,
|
|
pid_p, pid_i, trickle_sec);
|
|
write(fd, debug_message, strlen(debug_message));
|
|
wrcount++;
|
|
}
|
|
}
|
|
#endif
|
|
handle_auto_poweroff();
|
|
|
|
#if CONFIG_CHARGING == CHARGING_CONTROL
|
|
powermgmt_last_cycle_startstop_min++;
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void powermgmt_init(void)
|
|
{
|
|
/* init history to 0 */
|
|
memset(power_history, 0x00, sizeof(power_history));
|
|
|
|
create_thread(power_thread, power_stack, sizeof(power_stack),
|
|
power_thread_name);
|
|
}
|
|
|
|
#endif /* SIMULATOR */
|
|
|
|
void sys_poweroff(void)
|
|
{
|
|
logf("sys_poweroff()");
|
|
/* If the main thread fails to shut down the system, we will force a
|
|
power off after an 20 second timeout */
|
|
shutdown_timeout = HZ*20;
|
|
|
|
queue_post(&button_queue, SYS_POWEROFF, NULL);
|
|
}
|
|
|
|
void cancel_shutdown(void)
|
|
{
|
|
logf("sys_cancel_shutdown()");
|
|
shutdown_timeout = 0;
|
|
}
|
|
|
|
/* Various hardware housekeeping tasks relating to shutting down the jukebox */
|
|
void shutdown_hw(void)
|
|
{
|
|
#ifndef SIMULATOR
|
|
#if defined(DEBUG_FILE) && (CONFIG_CHARGING == CHARGING_CONTROL)
|
|
if(fd >= 0) {
|
|
close(fd);
|
|
fd = -1;
|
|
}
|
|
#endif
|
|
audio_stop();
|
|
#ifdef HAVE_LCD_BITMAP
|
|
glyph_cache_save();
|
|
#endif
|
|
ata_flush();
|
|
ata_spindown(1);
|
|
while(ata_disk_is_active())
|
|
sleep(HZ/10);
|
|
|
|
mp3_shutdown();
|
|
#ifdef HAVE_UDA1380
|
|
uda1380_close();
|
|
#elif defined(HAVE_TLV320)
|
|
tlv320_close();
|
|
#elif defined(HAVE_WM8758) || defined(HAVE_WM8975)
|
|
wmcodec_close();
|
|
#endif
|
|
#ifndef IAUDIO_X5
|
|
#if defined(HAVE_BACKLIGHT_PWM_FADING) && !defined(SIMULATOR)
|
|
backlight_set_fade_out(0);
|
|
#endif
|
|
backlight_off();
|
|
#endif /* IAUDIO_X5 */
|
|
#if defined(IPOD_ARCH) && defined(HAVE_LCD_COLOR)
|
|
/* Clear the screen and backdrop to
|
|
remove ghosting effect on shutdown */
|
|
lcd_set_backdrop(NULL);
|
|
lcd_set_background(LCD_WHITE);
|
|
lcd_clear_display();
|
|
lcd_update();
|
|
sleep(HZ/16);
|
|
#endif
|
|
#ifndef IAUDIO_X5
|
|
lcd_set_contrast(0);
|
|
#endif
|
|
#ifdef HAVE_REMOTE_LCD
|
|
remote_backlight_off();
|
|
lcd_remote_set_contrast(0);
|
|
#endif
|
|
power_off();
|
|
#endif /* #ifndef SIMULATOR */
|
|
}
|