0fc30d1174
without functionality git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10399 a1c6a512-1295-4272-9138-f99709370657
121 lines
3.5 KiB
C
121 lines
3.5 KiB
C
/*
|
|
* This config file is for the Sandisk Sansa e200
|
|
*/
|
|
#define TARGET_TREE /* this target is using the target tree system */
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 12
|
|
|
|
/* define this if you have recording possibility */
|
|
/*#define HAVE_RECORDING 1*/ /* TODO: add support for this */
|
|
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP 1
|
|
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR 1
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 176
|
|
#define LCD_HEIGHT 220
|
|
#define LCD_DEPTH 16 /* 65536 colours */
|
|
#define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */
|
|
|
|
/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
|
|
|
|
#define CONFIG_KEYPAD SANSA_E200_PAD
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
|
|
/* define this if you have a real-time clock */
|
|
#ifndef BOOTLOADER
|
|
#define CONFIG_RTC RTC_E8564 /* TODO: figure this out */
|
|
#endif
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x80000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
/* Define this if you have the WM8975 audio codec */
|
|
#define HAVE_WM8731
|
|
|
|
#define AB_REPEAT_ENABLE 1
|
|
|
|
/* FM Tuner */
|
|
/*#define CONFIG_TUNER TEA5767
|
|
#define CONFIG_TUNER_XTAL 32768 *//* TODO: what is this? */
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define CONFIG_BACKLIGHT BL_H10 /* TODO: figure this out, probably not necessary
|
|
because of 'target' stuff */
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 700 /* default battery capacity
|
|
TODO: check this, probably different
|
|
for different models too */
|
|
|
|
#ifndef SIMULATOR
|
|
|
|
/* Define this if you have a PortalPlayer PP5024 */
|
|
#define CONFIG_CPU PP5024
|
|
|
|
/* Define this if you want to use the PP5020 i2c interface */
|
|
#define CONFIG_I2C I2C_PP5020
|
|
|
|
/* Type of mobile power */
|
|
#define CONFIG_BATTERY BATT_LPCS355385
|
|
#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 1600 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 10 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
#define BATTERY_SCALE_FACTOR 5865
|
|
|
|
/* Hardware controlled charging? FIXME */
|
|
//#define CONFIG_CHARGING CHARGING_SIMPLE
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
/* TODO: should this be set for the H10? */
|
|
//#define HAVE_POWEROFF_WHILE_CHARGING
|
|
|
|
/* The start address index for ROM builds */
|
|
#define ROM_START 0x00000000
|
|
|
|
/* Define this to the CPU frequency */
|
|
/* TODO: this is probably wrong */
|
|
#define CPU_FREQ 11289600
|
|
|
|
/* Type of LCD TODO: hopefully the same as the x5 but check this*/
|
|
#define CONFIG_LCD LCD_X5
|
|
|
|
/* Offset ( in the firmware file's header ) to the file length */
|
|
#define FIRMWARE_OFFSET_FILE_LENGTH 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
|
|
/* #define USB_IPODSTYLE */
|
|
|
|
/* define this if the unit can be powered or charged via USB */
|
|
#define HAVE_USB_POWER
|
|
|
|
/* Virtual LED (icon) */
|
|
#define CONFIG_LED LED_VIRTUAL
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
/*#define HAVE_ADJUSTABLE_CPU_FREQ Let's say we don't for now*/
|
|
|
|
#define BOOTFILE_EXT "e200"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
|
|
#endif
|