Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export/config/gogearhdd1630.h
Nils Wallménius d29a11b7a8 Rename HAVE_PITCHSCREEN to HAVE_PITCHCONTROL 
Also move the definition to config.h

Change-Id: I36bb5020c5e06b2344292bc05e8c13ccc7a6a1ff
Reviewed-on: http://gerrit.rockbox.org/234
Reviewed-by: Nils Wallménius <nils@rockbox.org>
2012-05-09 14:32:38 +02:00

210 lines
6.1 KiB
C
Raw Blame History

/*
* This config file is for the Philips GoGear HDD16x0/HDD18x0
*/
/* For Rolo and boot loader */
#define MODEL_NUMBER 31
#define MODEL_NAME "Philips GoGear HDD16x0"
/* define this if you use an ATA controller */
#define CONFIG_STORAGE STORAGE_ATA
/*define this if the ATA controller and method of USB access support LBA48 */
#define HAVE_LBA48
/* define this if you have recording possibility */
#define HAVE_RECORDING
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
/* define the bitmask of hardware sample rates */
#define HW_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
/* define the bitmask of recording sample rates */
#define REC_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* LCD dimensions */
#define LCD_WIDTH 128
#define LCD_HEIGHT 128
#define LCD_DEPTH 16 /* 65536 colours */
#define LCD_PIXELFORMAT RGB565 /* rgb565 byte-swapped */
#ifndef BOOTLOADER
/* Define this if your LCD can be enabled/disabled */
/* #define HAVE_LCD_ENABLE */
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
* should be defined as well.
* We can currently put the lcd to sleep but it won't wake up properly */
/* #define HAVE_LCD_SLEEP */
/* #define HAVE_LCD_SLEEP_SETTING */
#endif
/* define this if you can flip your LCD */
#define HAVE_LCD_FLIP
/* define this if you can invert the colours on your LCD */
#define HAVE_LCD_INVERT
/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
#define CONFIG_KEYPAD PHILIPS_HDD1630_PAD
/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT
/* define this if the target has volume keys which can be used in the lists */
#define HAVE_VOLUME_IN_LIST
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
/* define this if you have a real-time clock. The HDD16x0 has a PCF8563 RTC,
but it's register compatible with the E8564. */
#ifndef BOOTLOADER
#define CONFIG_RTC RTC_E8564
#define HAVE_RTC_ALARM
#endif
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
/* Define this if you have the WM8731 audio codec */
#define HAVE_WM8731
/* WM8731 has no tone controls, so we use the software ones */
#define HAVE_SW_TONE_CONTROLS
/* TODO: #define AB_REPEAT_ENABLE */
/* FM Tuner */
#define CONFIG_TUNER TEA5767
#define CONFIG_TUNER_XTAL 32768
/* define this if you have a disk storage, i.e. something
that needs spinups and can cause skips when shaked */
#define HAVE_DISK_STORAGE
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS
/* #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING */
/* Main LCD backlight brightness range and defaults */
#define MIN_BRIGHTNESS_SETTING 1
#define MAX_BRIGHTNESS_SETTING 16
#define DEFAULT_BRIGHTNESS_SETTING 13 /* match OF brightness */
/* define this if you have a light associated with the buttons */
#define HAVE_BUTTON_LIGHT
#define HAVE_BUTTONLIGHT_BRIGHTNESS
#define BATTERY_CAPACITY_DEFAULT 630 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 630 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 630 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
/* Hardware controlled charging */
#define CONFIG_CHARGING CHARGING_SIMPLE
/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER
/* Define this if you have a PortalPlayer PP5020 */
#define CONFIG_CPU PP5022
/* Define this if you want to use the PP5020 i2c interface */
#define CONFIG_I2C I2C_PP5020
/* define this if the hardware can be powered off while charging */
#define HAVE_POWEROFF_WHILE_CHARGING
/* The start address index for ROM builds */
#define ROM_START 0x00000000
/* The size of the flash ROM */
#define FLASH_SIZE 0x100000
/* Define this to the CPU frequency */
#define CPU_FREQ 75000000
/* Type of LCD */
#define CONFIG_LCD LCD_HDD1630
/* Define this if your LCD can set contrast */
#define HAVE_LCD_CONTRAST
#define MIN_CONTRAST_SETTING 0
#define MAX_CONTRAST_SETTING 127
#define DEFAULT_CONTRAST_SETTING 63 /* Match boot contrast */
/* We're able to shut off power to the HDD */
#define HAVE_ATA_POWER_OFF
/* Offset ( in the firmware file's header ) to the file CRC and data. These are
only used when loading the old format rockbox.e200 file */
#define FIRMWARE_OFFSET_FILE_CRC 0x0
#define FIRMWARE_OFFSET_FILE_DATA 0x8
/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_ARC
/* enable these for the experimental usb stack */
#define HAVE_USBSTACK
#define USE_ROCKBOX_USB
#define USB_VENDOR_ID 0x0471
#define USB_PRODUCT_ID 0x014C
#define HAVE_USB_HID_MOUSE
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
#define MI4_FORMAT
#define BOOTFILE_EXT "mi4"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#define ICODE_ATTR_TREMOR_NOT_MDCT
/* DMA is used only for reading on PP502x because although reads are ~8x faster
* writes appear to be ~25% slower.
*/
/* Switched off due to reported instabilities. #define HAVE_ATA_DMA */
/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY
Reference in a new issue View git blame Copy permalink