Michael Sevakis e6511d8eaa Faster video rendering for e200 and Gigabeat. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14675 a1c6a512-1295-4272-9138-f99709370657		2007-09-12 09:02:31 +00:00
..
adc-meg-fx.c
adc-target.h
ata-meg-fx.c	Basic gigabeat buttonlight support outside of debug menu FS#7112. Also disables USB PLL and the USB device clock (uneeded to connect to computer) - May offer some power savings. Changed how some pins are initialized.	2007-05-07 19:34:34 +00:00
ata-target.h
backlight-meg-fx.c	Stop Gigabeat bootloader from panicing.	2007-07-29 07:41:19 +00:00
backlight-target.h	More Gigabeat button light fixes. Settings now work properly, startup does not cause the button lights to flash when disabled. Buttonlights are now shutdown on power off.	2007-05-10 03:08:47 +00:00
button-meg-fx.c	add separate button defines for the Gigabeat remote control	2007-05-20 11:42:04 +00:00
button-target.h	add separate button defines for the Gigabeat remote control	2007-05-20 11:42:04 +00:00
dma_start.c
i2c-meg-fx.c	Gigabeat: Replace generic i2c driver with one that uses the CPU's builtin controller. Add some clocking registers to 'View I/O ports'.	2007-06-26 02:11:30 +00:00
i2c-meg-fx.h	Gigabeat: Replace generic i2c driver with one that uses the CPU's builtin controller. Add some clocking registers to 'View I/O ports'.	2007-06-26 02:11:30 +00:00
kernel-meg-fx.c	Gigabeat: Add timer functionality. Rework tick timer setup to be exactly 100Hz. Metronome should work now but some pcm changes are needed to have faster tocks work correctly (in the works).	2007-07-06 21:36:32 +00:00
lcd-as-meg-fx.S	Faster video rendering for e200 and Gigabeat.	2007-09-12 09:02:31 +00:00
lcd-meg-fx.c	Faster video rendering for e200 and Gigabeat.	2007-09-12 09:02:31 +00:00
lcd-target.h
mmu-meg-fx.c
mmu-meg-fx.h
pcm-meg-fx.c	Temporary fix for FS#7257 and FS#7261 - playback resumes while paused when seeking	2007-07-05 10:19:06 +00:00
power-meg-fx.c	Make sure that the IDE power pin is properly initialized	2007-05-15 00:22:51 +00:00
powermgmt-meg-fx.c	First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.	2007-08-17 06:45:18 +00:00
sc606-meg-fx.c	revert the last changes because they prevent some Gigabeats from shutting down	2007-05-11 16:42:53 +00:00
sc606-meg-fx.h
system-meg-fx.c	Get rid of yellow plus an optimization I should have seen in the first place.	2007-07-05 08:21:10 +00:00
system-target.h
timer-meg-fx.c	Gigabeat: oops, forgot to set correct timer prescaler limit.	2007-07-06 22:08:07 +00:00
timer-target.h	Gigabeat: Add timer functionality. Rework tick timer setup to be exactly 100Hz. Metronome should work now but some pcm changes are needed to have faster tocks work correctly (in the works).	2007-07-06 21:36:32 +00:00
usb-meg-fx.c	FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value.	2007-09-04 08:03:07 +00:00
usb-target.h	FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value.	2007-09-04 08:03:07 +00:00
wmcodec-meg-fx.c	Gigabeat: Replace generic i2c driver with one that uses the CPU's builtin controller. Add some clocking registers to 'View I/O ports'.	2007-06-26 02:11:30 +00:00