Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export/config/sansae200.h
Thomas Martitz c1bd9b0361 Rework powermgmt to enable code re-use on appliation and sims. 
* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.

* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,

* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
2012-01-03 23:44:38 +00:00

231 lines
6.7 KiB
C
Raw Blame History

/*
* This config file is for the Sandisk Sansa e200
*/
#define TARGET_TREE /* this target is using the target tree system */
/* For Rolo and boot loader */
#define MODEL_NUMBER 16
#define MODEL_NAME "Sandisk Sansa e200 series"
#define HW_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32)
/* define this if you have recording possibility */
#define HAVE_RECORDING
#define REC_SAMPR_CAPS (SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16)
#define REC_FREQ_DEFAULT REC_FREQ_22 /* Default is not 44.1kHz */
#define REC_SAMPR_DEFAULT SAMPR_22
/* because the samplerates don't match at each point, we must be able to
* tell PCM which set of rates to use. not needed if recording rates are
* a simple subset of playback rates and are equal values. */
#define CONFIG_SAMPR_TYPES
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you have a light associated with the buttons */
#define HAVE_BUTTON_LIGHT
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you have access to the pitchscreen */
#define HAVE_PITCHSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* LCD dimensions */
#define LCD_WIDTH 176
#define LCD_HEIGHT 220
#define LCD_DEPTH 16 /* 65536 colours */
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
#ifndef BOOTLOADER
/* define this if you have LCD enable function */
#define HAVE_LCD_ENABLE
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
should be defined as well. */
#define HAVE_LCD_SLEEP
#define HAVE_LCD_SLEEP_SETTING
#endif
/* define this if you can flip your LCD */
#define HAVE_LCD_FLIP
/* define this if you can invert the colours on your LCD */
#define HAVE_LCD_INVERT
/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
#define CONFIG_KEYPAD SANSA_E200_PAD
/* Define this to have CPU boosted while scrolling in the UI */
#define HAVE_GUI_BOOST
/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
/* There is no hardware tone control */
#define HAVE_SW_TONE_CONTROLS
/* The PP5024 has a built-in AustriaMicrosystems AS3514 */
#define HAVE_AS3514
/* define this if you have a real-time clock */
#ifndef BOOTLOADER
#define CONFIG_RTC RTC_AS3514
#endif
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* Some Sansa E200s seem to be FAT16 formatted */
#define HAVE_FAT16SUPPORT
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
#define AB_REPEAT_ENABLE
/* FM Tuner */
#define CONFIG_TUNER LV24020LP
#define HAVE_TUNER_PWR_CTRL
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS
/* Which backlight fading type? */
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
/* define this if the unit uses a scrollwheel for navigation */
#define HAVE_SCROLLWHEEL
/* define to activate advanced wheel acceleration code */
#define HAVE_WHEEL_ACCELERATION
/* define from which rotation speed [degree/sec] on the acceleration starts */
#define WHEEL_ACCEL_START 540
/* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
#define WHEEL_ACCELERATION 1
/* define this if you have a flash memory storage */
#define HAVE_FLASH_STORAGE
/* define this if the flash memory uses the SecureDigital Memory Card protocol */
#define CONFIG_STORAGE STORAGE_SD
#define BATTERY_CAPACITY_DEFAULT 750 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 750 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 750 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
/* Charging implemented in a target-specific algorithm */
#define CONFIG_CHARGING CHARGING_TARGET
#define HAVE_POWEROFF_WHILE_CHARGING
/* define current usage levels */
#define CURRENT_NORMAL 30 /* Toni's measurements in Nov 2008 */
#define CURRENT_BACKLIGHT 40 /* Screen is about 20, blue LEDs are another 20, so 40 if both */
#define CURRENT_RECORD 30 /* flash player, so this is just unboosted current*/
/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER
/* Define this if you have a PortalPlayer PP5024 */
#define CONFIG_CPU PP5024
/* Define this if you want to use the PP5024 i2c interface */
#define CONFIG_I2C I2C_PP5024
/* define this if the hardware can be powered off while charging */
/* Sansa can't be powered off while charging */
/* #define HAVE_POWEROFF_WHILE_CHARGING */
/* The start address index for ROM builds */
#define ROM_START 0x00000000
/* Define this to the CPU frequency */
#define CPU_FREQ 75000000
/* Type of LCD TODO: hopefully the same as the x5 but check this*/
#define CONFIG_LCD LCD_X5
/* Offset ( in the firmware file's header ) to the file CRC and data. These are
only used when loading the old format rockbox.e200 file */
#define FIRMWARE_OFFSET_FILE_CRC 0x0
#define FIRMWARE_OFFSET_FILE_DATA 0x8
#ifndef BOOTLOADER
#define HAVE_MULTIDRIVE
#define NUM_DRIVES 2
#define HAVE_HOTSWAP
#endif
/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_ARC
/* enable these for the experimental usb stack */
#define HAVE_USBSTACK
#define USE_ROCKBOX_USB
#define USB_VENDOR_ID 0x0781
#define USB_PRODUCT_ID 0x7421
#define HAVE_USB_HID_MOUSE
#ifdef BOOTLOADER
#define HAVE_BOOTLOADER_USB_MODE
#endif
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
#define MI4_FORMAT
#define BOOTFILE_EXT "mi4"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#define ICODE_ATTR_TREMOR_NOT_MDCT
#define INCLUDE_TIMEOUT_API
/** Port-specific settings **/
/* Main LCD backlight brightness range and defaults */
#define MIN_BRIGHTNESS_SETTING 1
#define MAX_BRIGHTNESS_SETTING 12
#define DEFAULT_BRIGHTNESS_SETTING 6
/* Default recording levels */
#define DEFAULT_REC_MIC_GAIN 23
#define DEFAULT_REC_LEFT_GAIN 23
#define DEFAULT_REC_RIGHT_GAIN 23
#ifdef E200R_INSTALLER
#define IRAMORIG 0x40004000
#endif
/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY
Reference in a new issue View git blame Copy permalink