| .. |
|
common
|
ZVM:
|
2008-09-07 17:24:14 +00:00 |
|
decompressor
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
drivers
|
fix off-by-one error when reading spi data
|
2008-09-16 16:47:13 +00:00 |
|
export
|
Commit fs#9404 (iAudio 7 updates by vitja). Also fixes play/pause behaviour on D2.
|
2008-09-16 08:09:44 +00:00 |
|
include
|
Add wpseditor, the Google Summer of Code 2008 project of Rostislav Chekan. Closes FS#9327
|
2008-08-29 21:08:38 +00:00 |
|
target
|
Now reads the LCD controller ID succesfully and flashes it using the backlight
|
2008-09-16 16:51:25 +00:00 |
|
test
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
usbstack
|
Simplify & fix the MMC driver. After more than 3 years I found that the MMC specs were a bit misleading, and the 'large' MMC which state a block size of 1024 or 2048 bytes and no partial read and/or partial write capability are happily accepting a block size of 512 bytes. So go KISS and remove all the variable/partial block handling code. This fixes the driver for the Transcend 4GB MMCplus, which doesn't cope when we actually set the 2048 byte block size it states. It also makes write operations involving small blocks faster and more reliable. * Note: The 4GB Transcend still doesn't work when plugged at boot, but works when hotplugged.
|
2008-09-14 20:33:24 +00:00 |
|
arabjoin.c
|
|
|
|
arabjoin.h
|
|
|
|
ata_idle_notify.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
backlight.c
|
Revert v18522 for firmware/backlight.c, it breaks a couple of bootloaders
|
2008-09-15 20:01:07 +00:00 |
|
bidi.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
buffer.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
COPYING
|
|
|
|
debug.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
eeprom_settings.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
enc_base.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
events.c
|
Apply FS#9155 (Simplified battery bench). This is a simplification/rework of the current battery bench code. Battery measurements are now done simply once a minute (no more dependency on HDD specific timeouts) and are flushed to disk by using the ata_idle callback instead of polling ata_disk_is_active (this call is removed from the plugin API now) to make the plugin as unobtrusive as possible. This battery bench plugin also works for flash-based targets like sansa e200.
|
2008-08-14 22:35:00 +00:00 |
|
font.c
|
Add wpseditor, the Google Summer of Code 2008 project of Rostislav Chekan. Closes FS#9327
|
2008-08-29 21:08:38 +00:00 |
|
font_cache.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
general.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
hangul.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
hotswap.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
id3.c
|
Fix a problem reading some ID3v2.4 tags. The data length refers to the size of the frame without compression, unsynchronization and the like, so it should not be used when skipping unsupported frames in the file.
|
2008-08-17 12:31:32 +00:00 |
|
ifp_usb_serial.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
kernel.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
logf.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
lru.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
Makefile
|
Font cleanup step 3 - The Big Shuffle: Renamed all fonts to a consistent naming scheme that allows easy selection of alternatives based on size, as discussed on IRC. Adjusted themes in SVN and Makefile for the sysfont. ** Attention **: Clean up your /.rockbox/fonts folder before installing the new release, and then install a new font pack as well. Adjust font names in your custom .cfg files. A reference table can be found in fonts/README.
|
2008-09-02 22:31:11 +00:00 |
|
mp3_playback.c
|
Make local function static in mp3_playback.c and match usb_init_device prototype to implementation for Archos recorder
|
2008-09-12 20:57:19 +00:00 |
|
mp3data.c
|
Add wpseditor, the Google Summer of Code 2008 project of Rostislav Chekan. Closes FS#9327
|
2008-08-29 21:08:38 +00:00 |
|
mpeg.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
panic.c
|
Change 18 char limit to (LCD_WIDTH/SYSFONT_WIDTH) in panicf() (FS#9282)
|
2008-08-15 16:49:02 +00:00 |
|
pcm.c
|
Fix a slightly misleading logf
|
2008-07-13 17:34:58 +00:00 |
|
pcm_record.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcm_sampr.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
powermgmt.c
|
fix the sleeptimer which got broken in r17872
|
2008-07-10 02:33:00 +00:00 |
|
profile.c
|
Commit FS#9170 by Dave Hooper. Adds support for profiling on ARM, and fixes various issues with compiling profile builds. Also, note that profile_reader.pl syntax has changed.
|
2008-07-28 22:43:41 +00:00 |
|
README
|
|
|
|
replaygain.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
rolo.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
rom.lds
|
Make sure the linker considers crt0*.o before all files specified on the command line by using STARTUP() instead of INPUT() in the .lds. Using INPUT() makes the linker process crt0*.o after all files specified on the command line, making linking fail if there are librockbox.a members which are only referenced by crt0*.o. Remove the hackaround that was needed for building the gigabeat S bootloader before (aka UIE() problem).
|
2008-04-29 06:19:32 +00:00 |
|
scroll_engine.c
|
revert that scroll engine stuff... good in theory, but broken.
|
2008-07-02 13:02:57 +00:00 |
|
sound.c
|
iPod Video: Fix playback after recording (FS #7402). Implement recording gain adjustment. * Enable timeout for zero-crossing detection (SLOWCLK), avoids hanging volume/ gain due to DC offsets.
|
2008-09-13 19:34:16 +00:00 |
|
SOURCES
|
* move qt1106 specific things to their own files
|
2008-09-11 18:18:40 +00:00 |
|
system.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
thread.c
|
Commit fs#9404 (iAudio 7 updates by vitja). Also fixes play/pause behaviour on D2.
|
2008-09-16 08:09:44 +00:00 |
|
timer.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
tuner.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
usb.c
|
properly remount the filesystem after usb disconnect with software usb
|
2008-08-20 20:32:12 +00:00 |
c0e898ae29