Robert Kukla 9dc67828a9 mrobe 100: real time clock (if anybody recognises the RTC chip let me know) ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16208 a1c6a512-1295-4272-9138-f99709370657		2008-02-03 18:15:39 +00:00
..
adc-h100.c	Coldfire: Partially revert buffered writes, and enable them explicitly for the LCD only. Turned out that with buffered writes enabled, reads after writes are not always serialized, which is a bad thing for I/O. Buffered writes to the LCD are safe because that's write-only. Fixes FS #7985. How come I didn't notice this earlier? :>	2007-10-17 20:45:13 +00:00
adc-target.h	H1x0, H300: Get rid of the adc tick, and use the same concept as the iAudio ADC driver.	2007-07-30 19:13:59 +00:00
backlight-h100.c	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
backlight-target.h	Fix bootloaders, and the backlight-modded Ondio build.	2007-11-12 19:19:38 +00:00
button-h100.c	Removed unnecessary #include s.	2006-10-29 19:29:41 +00:00
lcd-as-h100.S	Fix graphical glitches occuring in the greyscale library on H1x0 and M5 at 124MHz. The main loop within lcd_grey_data() needed instruction reordering (interspersing lcd writes with memory accesses) to meed the LCD controller timing. Slight slowdown because of the extra register needed.	2008-01-15 00:51:58 +00:00
lcd-h100.c	Greyscale library: Changed the internal data format once more (separated pixel values and phases), allowing for further optimisation of drawing, scrolling etc. * Optimised grey phase blitting in the core reduces CPU load on all architectures, most significantly on coldfire. Previous version was too slow to keep up at 45MHz, leading to unwanted graininess (update frequency was halved). Also fixed screendump on 2bpp targets with vertical pixel packing.	2008-01-09 23:48:26 +00:00
power-h100.c	Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.	2007-08-14 22:06:23 +00:00
powermgmt-h100.c	First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.	2007-08-17 06:45:18 +00:00
spdif-h100.c	Straighten out some audio path APIs and misc. audio stuff. Having recording is not a prerequisite to having input/output source selection which is probably most useful when adding a audio input features like FM to a new port without forcing recording to be implemented first.	2007-06-08 23:42:04 +00:00
usb-h100.c	FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value.	2007-09-04 08:03:07 +00:00