Bertrik Sikken bf2ec0674e rtc_as3514.c: make alarm struct static and reorder fields to save some binsize ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27448 a1c6a512-1295-4272-9138-f99709370657		2010-07-16 10:41:41 +00:00
..
audio	HD200 - Setup codec as I2S master and enable recording	2010-07-02 21:09:28 +00:00
rtc	rtc_as3514.c: make alarm struct static and reorder fields to save some binsize	2010-07-16 10:41:41 +00:00
tuner	Sanyo lv24020lp FM: Improve frequency measurement on PP thus improving initial frequency setting. Properly account for IF when tuning FM oscillator (this worked poorly before but appears to work as expected now -- aka. works for me). Not sure what this will do to iAudio7 or Cowon D2 but if they can implement a good duration measurement, they should do so or use the internal timer if possible.	2010-06-22 07:27:34 +00:00
ata.c	ata: do some threading-related corrections (some sync related where it matters). Make sure 'sleeping' is 'false' before the powerup sequence (throws-off powermgmt and it *is* about to woken again and powermgmt will need to compensate). Avoid looking at mutex flag directly; there's no tangible benefit I can discern and changes to the kernel that alter the meaning shouldn't be able to break anything. For that, in the jz sd driver, have sd_disk_is_active just return 'false' like all the other SD drivers do. If it *must* return this, it should implement it's own method but it seems to not matter.	2010-05-21 15:33:31 +00:00
ata_flash.c
ata_mmc.c	Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.	2010-06-06 13:20:47 +00:00
button.c	Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).	2010-06-21 16:53:00 +00:00
dac.c
dac.h	Final removal of tabs in firmware path	2010-01-03 11:31:14 +00:00
eeprom_24cxx.c
fat.c	fat.c: fix format specifier in DEBUG build	2010-07-11 16:46:40 +00:00
fmradio.c
generic_i2c.c	Apply FS #11423 - Use udelay in AMS driver for FM radio I2C	2010-06-21 21:41:07 +00:00
i2c.c
isp1362.c
isp1583.c
lcd-1bit-vert.c	Rename sdl lcd initialization to (remote_)lcd_init_device which enables removing two #ifdef SIMULATOR and makes it happen as on target.	2010-05-18 12:27:20 +00:00
lcd-2bit-horz.c	Comment out lcd_drawline() DEBUGF messages which show in various simulators	2010-02-20 06:42:45 +00:00
lcd-2bit-vert.c	Comment out lcd_drawline() DEBUGF messages which show in various simulators	2010-02-20 06:42:45 +00:00
lcd-2bit-vi.c	Rename sdl lcd initialization to (remote_)lcd_init_device which enables removing two #ifdef SIMULATOR and makes it happen as on target.	2010-05-18 12:27:20 +00:00
lcd-16bit-vert.c	Comment out lcd_drawline() DEBUGF messages which show in various simulators	2010-02-20 06:42:45 +00:00
lcd-16bit.c	Comment out lcd_drawline() DEBUGF messages which show in various simulators	2010-02-20 06:42:45 +00:00
lcd-bitmap-common.c	avoid overflow in puts_scroll().	2010-05-21 13:30:21 +00:00
lcd-charcell.c	avoid overflow in puts_scroll().	2010-05-21 13:30:21 +00:00
lcd-charset-player.c	Final removal of tabs in firmware path	2010-01-03 11:31:14 +00:00
lcd-remote-1bit-v.c
lcd-remote-2bit-vi.c
led.c
m5636.c
m66591.c	M66591 Driver: Correct some comments.	2010-03-17 01:43:15 +00:00
mas.c
nand_id.c
pcf50605.c
pcf50606.c
pcf50635.c
qt1106.c
ramdisk.c
sd.c	remane hotswap.* to sdmmc.*. The contents have nothing at all to do with hotswapping things	2010-06-05 21:12:16 +00:00
serial.c
sw_i2c.c
synaptics-mep.c	hdd6330: change the synaptics-mep driver in a few places according to the touchpad behavior.	2010-07-04 12:03:38 +00:00
touchscreen.c
tsc200x.c
tsc2100.c