dc3cc55b65
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24364 a1c6a512-1295-4272-9138-f99709370657
764 lines
21 KiB
C
764 lines
21 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2006 Daniel Ankers
|
|
* Copyright © 2008-2009 Rafaël Carré
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#include "config.h" /* for HAVE_MULTIVOLUME */
|
|
#include "fat.h"
|
|
#include "thread.h"
|
|
#include "hotswap.h"
|
|
#include "system.h"
|
|
#include "kernel.h"
|
|
#include "cpu.h"
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
#include "as3525v2.h"
|
|
#include "pl081.h" /* DMA controller */
|
|
#include "dma-target.h" /* DMA request lines */
|
|
#include "clock-target.h"
|
|
#include "panic.h"
|
|
#include "stdbool.h"
|
|
#include "ata_idle_notify.h"
|
|
#include "sd.h"
|
|
|
|
#include "lcd.h"
|
|
#include <stdarg.h>
|
|
#include "sysfont.h"
|
|
|
|
static int line = 0;
|
|
static void printf(const char *format, ...)
|
|
{
|
|
char buf[50];
|
|
int len;
|
|
va_list ap;
|
|
va_start(ap, format);
|
|
|
|
len = vsnprintf(buf, sizeof(buf), format, ap);
|
|
va_end(ap);
|
|
|
|
lcd_puts(0, line++, buf);
|
|
lcd_update();
|
|
if(line >= LCD_HEIGHT/SYSFONT_HEIGHT)
|
|
line = 0;
|
|
}
|
|
|
|
/* command flags */
|
|
#define MCI_NO_RESP (0<<0)
|
|
#define MCI_RESP (1<<0)
|
|
#define MCI_LONG_RESP (1<<1)
|
|
|
|
/* controller registers */
|
|
#define SD_BASE 0xC6070000
|
|
|
|
/*
|
|
* REGISTERS
|
|
*
|
|
* m = modify (orr/bic), r = read, w = write
|
|
*
|
|
* 00 m/r/w
|
|
* 04 m/w
|
|
* 08 m
|
|
* 0C ?
|
|
* 10 r/w
|
|
* 14 w
|
|
* 18 m
|
|
* 1C w ==> set a bit before transfer (sometimes) !
|
|
* 20 w ==> set a bit before transfer !
|
|
* 24 w irq mask ?
|
|
* 28 w arg
|
|
* 2C r/w cmd
|
|
* 30 r resp0
|
|
* 34 r resp1
|
|
* 38 r resp2
|
|
* 3C r resp3
|
|
* 40 r irq status (only read in isr)
|
|
* 44 m/w irq clear
|
|
* 48 r
|
|
* 4C m
|
|
* 64 w
|
|
* 70 r
|
|
* 100 FIFO
|
|
*/
|
|
|
|
/*
|
|
* STATUS register
|
|
* & 0xBA80
|
|
* & 8
|
|
* & 0x428
|
|
* & 0x418
|
|
*/
|
|
|
|
/*
|
|
* INFO on CMD register
|
|
*
|
|
* if(cmd >= 200) cmd -= 200; (>= 200 = acmd?)
|
|
*
|
|
* COMMANDS (| (x<<16) BITS RESPONSE
|
|
*
|
|
* 1 ? reserved & ~0x80, | 0x40, | 0x8000 ?
|
|
* 5 ? reserved for I/O cards & ~0x80, | 0x40 ?
|
|
* 11 ? reserved & ~0x80, | 0x40, | 0x2200, | 0x800 ?
|
|
* 14 ? reserved & ~0x80, | 0x40, | 0x2200, ~0x1000 ?
|
|
* 19 ? reserved & ~0x80, |0x40, | 0x2700, & ~0x1000 ?
|
|
* 20 ? reserved & ~0x80, |0x40, | 0x2700, | 0x800 ?
|
|
* 23 ? reserved & ~0x80, | 0x40 ?
|
|
* 39 ? reserved & ~0x80, | 0x40 ?
|
|
* 51 ? reserved & ~0x80, | 0x40, | 0x2000, | 0x200 ?
|
|
* 52 ? reserved for I/O & ~0x80, | 0x40 ?
|
|
* 53 ? reserved for I/O & ~0x80, | 0x40, | 0x2200, & ~0x1000 ?
|
|
* 253 ? & ~0x80, |0x40, | 0x2700, & ~0x1000 ?
|
|
*
|
|
* 0 GO IDLE STATE & ~0x4000, & ~0xC0, | 0x4000 no
|
|
* 2 ALL SEND CID & ~0x4000, |0xC0 r2
|
|
* 3 SEND RCA & ~0x80, | 0x40 r6
|
|
* 6 SWITCH_FUNC & ~0x80, | 0x40 r1
|
|
* 7 SELECT CARD & ~0x80, | 0x40 r1b
|
|
* 8 SEND IF COND & ~0x80, | 0x40, | 0x2200, & ~0x1000 r7
|
|
* 9 SEND CSD & ~0x4000, | 0xc0 r2
|
|
* 12 STOP TRANSMISSION & ~0x80, | 0x40, | 0x4000 r1b
|
|
* 13 SEND STATUS & ~0x80, | 0x40 r1
|
|
* 15 GO INACTIVE STATE & ~0x4000, & ~0xC0 no
|
|
* 16 SET BLOCKLEN & ~0x80, | 0x40 r1
|
|
* 17 READ SINGLE BLOCK & ~0x80, | 0x40, | 0x2200 r1
|
|
* 18 READ MULTIPLE BLOCK & ~0x80, | 0x40, | 0x2200 r1
|
|
* 24 WRITE BLOCK & ~0x80, |0x40, | 0x2700 r1
|
|
* 25 WRITE MULTIPLE BLOCK & ~0x80, |0x40, | 0x2700 r1
|
|
* 41 SEND APP OP COND & ~0x80, | 0x40 r3
|
|
* 42 LOCK UNLOCK & ~0x80, |0x40, | 0x2700 r1
|
|
* 55 APP CMD & ~0x80, | 0x40 r1
|
|
* 206 SET BUS WIDTH & ~0x80, | 0x40, | 0x2000 r1
|
|
* 207 SELECT CARD ? & ~0x4000, & ~0xC0 r1b
|
|
*
|
|
*
|
|
* bits 5:0 = cmd
|
|
* bit 6 (0x40) = response
|
|
* bit 7 (0x80) = long response
|
|
* => like pl180 <=
|
|
* BIT SET IN COMANDS:
|
|
*
|
|
* bit 8 (0x100) ? write block, write multi_block, lock/unlock
|
|
* bit 9 (0x200) ? send if cond, read block, read multi_block, write block, write multi_block, lock/unlock
|
|
* bit 10 (0x400) ? write block, write multi_block, lock/unlock
|
|
* bit 11 (0x800) ?
|
|
* bit 12 (0x1000) ?
|
|
* bit 13 (0x2000) ? send if cond, read block, read multi_block, write block, write multi_block, lock/unlock, set bus width
|
|
* bit 14 (0x4000) ? go idle state, stop transmission
|
|
* bit 15 (0x8000) ?
|
|
*
|
|
*/
|
|
|
|
/* FIXME */
|
|
#define MCI_POWER
|
|
#define MCI_CLOCK
|
|
#define MCI_ARGUMENT (*(volatile unsigned long *) (SD_BASE+0x28))
|
|
#define MCI_COMMAND (*(volatile unsigned long *) (SD_BASE+0x2C))
|
|
#define MCI_RESPCMD
|
|
#define MCI_RESP0 (*(volatile unsigned long *) (SD_BASE+0x30))
|
|
#define MCI_RESP1 (*(volatile unsigned long *) (SD_BASE+0x34))
|
|
#define MCI_RESP2 (*(volatile unsigned long *) (SD_BASE+0x38))
|
|
#define MCI_RESP3 (*(volatile unsigned long *) (SD_BASE+0x3C))
|
|
#define MCI_DATA_TIMER
|
|
#define MCI_DATA_LENGTH
|
|
#define MCI_DATA_CTRL
|
|
#define MCI_STATUS (*(volatile unsigned long *) (SD_BASE+0x40))
|
|
#define MCI_CLEAR (*(volatile unsigned long *) (SD_BASE+0x44))
|
|
#define MCI_MASK (*(volatile unsigned long *) (SD_BASE+0x24))
|
|
#define MCI_SELECT
|
|
|
|
#define MCI_ERROR 0 /* FIXME */
|
|
|
|
#define MCI_FIFO ((unsigned long *) (SD_BASE+0x100))
|
|
|
|
#define MCI_COMMAND_ENABLE (1<<31)
|
|
#define MCI_COMMAND_ACTIVE MCI_COMMAND_ENABLE
|
|
#define MCI_COMMAND_RESPONSE (1<<6)
|
|
#define MCI_COMMAND_LONG_RESPONSE (1<<7)
|
|
|
|
|
|
|
|
static int sd_init_card(void);
|
|
static void init_controller(void);
|
|
|
|
static tCardInfo card_info;
|
|
|
|
/* for compatibility */
|
|
static long last_disk_activity = -1;
|
|
|
|
#define MIN_YIELD_PERIOD 5 /* ticks */
|
|
static long next_yield = 0;
|
|
|
|
static long sd_stack [(DEFAULT_STACK_SIZE*2 + 0x200)/sizeof(long)];
|
|
static const char sd_thread_name[] = "ata/sd";
|
|
static struct mutex sd_mtx SHAREDBSS_ATTR;
|
|
static struct event_queue sd_queue;
|
|
#ifndef BOOTLOADER
|
|
static bool sd_enabled = false;
|
|
#endif
|
|
|
|
static struct wakeup transfer_completion_signal;
|
|
static volatile bool retry;
|
|
|
|
static inline void mci_delay(void) { int i = 0xffff; while(i--) ; }
|
|
|
|
void INT_NAND(void)
|
|
{
|
|
(*(volatile unsigned long *) (SD_BASE+0x0)) &= ~0x10; // ?
|
|
const int status = MCI_STATUS;
|
|
|
|
#if 0
|
|
if(status & MCI_ERROR)
|
|
retry = true;
|
|
#endif
|
|
|
|
// wakeup_signal(&transfer_completion_signal);
|
|
MCI_CLEAR = status;
|
|
|
|
static int x = 0;
|
|
switch(status)
|
|
{
|
|
case 0x4: /* cmd received ? */
|
|
case 0x104: /* ? 1 time in init (10th interrupt) */
|
|
case 0x2000: /* ? after cmd read_mul_blocks | 0x2200 */
|
|
|
|
case 0x820: /* ? 1 time while copy from FIFO (not DMA) */
|
|
case 0x20: /* ? rx fifo empty */
|
|
break;
|
|
default:
|
|
printf("%2d NAND 0x%x", ++x, status);
|
|
int delay = 0x100000; while(delay--) ;
|
|
}
|
|
/*
|
|
* 0x48 = some kind of status
|
|
* 0x106
|
|
* 0x4106
|
|
* 1B906
|
|
* 1F906
|
|
* 1B906
|
|
* 1F906
|
|
* 1F906
|
|
* 1906
|
|
* ...
|
|
* 6906
|
|
* 6D06 (dma)
|
|
*
|
|
* read resp (6, 7, 12, 42) : while bit 9 is unset ;
|
|
*
|
|
*/
|
|
printf("%x %x", status, (*(volatile unsigned long *) (SD_BASE+0x48)));
|
|
//while(!button_read_device());
|
|
//while(button_read_device());
|
|
|
|
(*(volatile unsigned long *) (SD_BASE+0x0)) |= 0x10; // ?
|
|
}
|
|
|
|
static bool send_cmd(const int cmd, const int arg, const int flags,
|
|
unsigned long *response)
|
|
{
|
|
int val;
|
|
val = cmd | MCI_COMMAND_ENABLE;
|
|
if(flags & MCI_RESP)
|
|
{
|
|
val |= MCI_COMMAND_RESPONSE;
|
|
if(flags & MCI_LONG_RESP)
|
|
val |= MCI_COMMAND_LONG_RESPONSE;
|
|
}
|
|
|
|
if(cmd == 18) /* r */
|
|
val |= 0x2200;
|
|
else if(cmd == 25) /* w */
|
|
val |= 0x2700;
|
|
|
|
int tmp = (*(volatile unsigned long *) (SD_BASE+0x10));
|
|
(*(volatile unsigned long *) (SD_BASE+0x10)) = 0;
|
|
|
|
MCI_COMMAND = 0x80202000;
|
|
MCI_ARGUMENT = 0;
|
|
int max = 10;
|
|
while(max-- && MCI_COMMAND & MCI_COMMAND_ACTIVE);
|
|
|
|
(*(volatile unsigned long *) (SD_BASE+0x08)) &= ~0xff;
|
|
(*(volatile unsigned long *) (SD_BASE+0x08)) |= 0;
|
|
|
|
MCI_COMMAND = 0x80202000;
|
|
MCI_ARGUMENT = 0;
|
|
max = 10;
|
|
while(max-- && MCI_COMMAND & MCI_COMMAND_ACTIVE);
|
|
|
|
(*(volatile unsigned long *) (SD_BASE+0x10)) = tmp;
|
|
|
|
MCI_COMMAND = 0x80202000;
|
|
MCI_ARGUMENT = 0;
|
|
max = 10;
|
|
while(max-- && MCI_COMMAND & MCI_COMMAND_ACTIVE);
|
|
|
|
mci_delay();
|
|
|
|
MCI_ARGUMENT = arg;
|
|
MCI_COMMAND = val;
|
|
|
|
(*(volatile unsigned long *) (SD_BASE+0x00)) |= 0x10;
|
|
|
|
max = 1000;
|
|
while(max-- && MCI_COMMAND & MCI_COMMAND_ACTIVE); /* wait for cmd completion */
|
|
if(!max)
|
|
return false;
|
|
|
|
if(flags & MCI_RESP)
|
|
{
|
|
if(flags & MCI_LONG_RESP)
|
|
{
|
|
/* store the response in little endian order for the words */
|
|
response[0] = MCI_RESP3;
|
|
response[1] = MCI_RESP2;
|
|
response[2] = MCI_RESP1;
|
|
response[3] = MCI_RESP0;
|
|
}
|
|
else
|
|
response[0] = MCI_RESP0;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
static int sd_init_card(void)
|
|
{
|
|
unsigned long response;
|
|
unsigned long temp_reg[4];
|
|
int max_tries = 100; /* max acmd41 attemps */
|
|
bool sdhc;
|
|
int i;
|
|
|
|
if(!send_cmd(SD_GO_IDLE_STATE, 0, MCI_NO_RESP, NULL))
|
|
return -1;
|
|
|
|
mci_delay();
|
|
|
|
sdhc = false;
|
|
if(send_cmd(SD_SEND_IF_COND, 0x1AA, MCI_RESP, &response))
|
|
if((response & 0xFFF) == 0x1AA)
|
|
sdhc = true;
|
|
|
|
do {
|
|
/* some MicroSD cards seems to need more delays, so play safe */
|
|
mci_delay();
|
|
mci_delay();
|
|
mci_delay();
|
|
|
|
/* app_cmd */
|
|
if( !send_cmd(SD_APP_CMD, 0, MCI_RESP, &response) /*||
|
|
!(response & (1<<5))*/ )
|
|
{
|
|
return -2;
|
|
}
|
|
|
|
/* acmd41 */
|
|
if(!send_cmd(SD_APP_OP_COND, (sdhc ? 0x40FF8000 : (1<<23)),
|
|
MCI_RESP, &card_info.ocr))
|
|
return -3;
|
|
} while(!(card_info.ocr & (1<<31)) && max_tries--);
|
|
|
|
if(max_tries < 0)
|
|
return -4;
|
|
|
|
mci_delay();
|
|
mci_delay();
|
|
mci_delay();
|
|
|
|
/* send CID */
|
|
if(!send_cmd(SD_ALL_SEND_CID, 0, MCI_RESP|MCI_LONG_RESP, card_info.cid))
|
|
return -5;
|
|
|
|
/* send RCA */
|
|
if(!send_cmd(SD_SEND_RELATIVE_ADDR, 0, MCI_RESP, &card_info.rca))
|
|
return -6;
|
|
|
|
/* send CSD */
|
|
if(!send_cmd(SD_SEND_CSD, card_info.rca,
|
|
MCI_RESP|MCI_LONG_RESP, temp_reg))
|
|
return -7;
|
|
|
|
for(i=0; i<4; i++)
|
|
card_info.csd[3-i] = temp_reg[i];
|
|
|
|
sd_parse_csd(&card_info);
|
|
|
|
if(!send_cmd(SD_APP_CMD, 0, MCI_RESP, &response) ||
|
|
!send_cmd(42, 0, MCI_NO_RESP, NULL)) /* disconnect the 50 KOhm pull-up
|
|
resistor on CD/DAT3 */
|
|
return -13;
|
|
|
|
if(!send_cmd(SD_APP_CMD, card_info.rca, MCI_NO_RESP, NULL))
|
|
return -10;
|
|
|
|
if(!send_cmd(SD_SET_BUS_WIDTH, card_info.rca | 2, MCI_NO_RESP, NULL))
|
|
return -11;
|
|
|
|
(*(volatile unsigned long *) (SD_BASE+0x18)) &= ~(0x10001);
|
|
(*(volatile unsigned long *) (SD_BASE+0x18)) |= 0x1;
|
|
|
|
if(!send_cmd(SD_SELECT_CARD, card_info.rca, MCI_NO_RESP, NULL))
|
|
return -9;
|
|
|
|
/* not sent in init_card() by OF */
|
|
if(!send_cmd(SD_SET_BLOCKLEN, card_info.blocksize, MCI_NO_RESP,
|
|
NULL))
|
|
return -12;
|
|
|
|
card_info.initialized = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sd_thread(void) __attribute__((noreturn));
|
|
static void sd_thread(void)
|
|
{
|
|
struct queue_event ev;
|
|
bool idle_notified = false;
|
|
|
|
while (1)
|
|
{
|
|
queue_wait_w_tmo(&sd_queue, &ev, HZ);
|
|
|
|
switch ( ev.id )
|
|
{
|
|
case SYS_TIMEOUT:
|
|
if (TIME_BEFORE(current_tick, last_disk_activity+(3*HZ)))
|
|
{
|
|
idle_notified = false;
|
|
}
|
|
else
|
|
{
|
|
/* never let a timer wrap confuse us */
|
|
next_yield = current_tick;
|
|
|
|
if (!idle_notified)
|
|
{
|
|
call_storage_idle_notifys(false);
|
|
idle_notified = true;
|
|
}
|
|
}
|
|
break;
|
|
#if 0
|
|
case SYS_USB_CONNECTED:
|
|
usb_acknowledge(SYS_USB_CONNECTED_ACK);
|
|
/* Wait until the USB cable is extracted again */
|
|
usb_wait_for_disconnect(&sd_queue);
|
|
|
|
break;
|
|
case SYS_USB_DISCONNECTED:
|
|
usb_acknowledge(SYS_USB_DISCONNECTED_ACK);
|
|
break;
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
|
|
static void init_controller(void)
|
|
{
|
|
int tmp = (*(volatile unsigned long *) (SD_BASE+0x70));
|
|
int shift = 1 + ((tmp << 26) >> 27);
|
|
|
|
(*(volatile unsigned long *) (SD_BASE+0x04)) &= ~((1 << shift) -1);
|
|
(*(volatile unsigned long *) (SD_BASE+0x04)) = (1 << shift) -1;
|
|
|
|
mci_delay();
|
|
|
|
(*(volatile unsigned long *) (SD_BASE+0x00)) |= 1;
|
|
int max = 1000;
|
|
while(max-- && !(*(volatile unsigned long *) (SD_BASE+0x00)) & 1)
|
|
;
|
|
|
|
MCI_CLEAR = 0xffffffff;
|
|
MCI_MASK = 0xffffbffe;
|
|
|
|
(*(volatile unsigned long *) (SD_BASE+0x00)) |= 0x10;
|
|
(*(volatile unsigned long *) (SD_BASE+0x14)) = 0xffffffff;
|
|
|
|
(*(volatile unsigned long *) (SD_BASE+0x10)) = (1<<shift) - 1;
|
|
|
|
MCI_ARGUMENT = 0;
|
|
MCI_COMMAND = 0x80202000;
|
|
max = 10;
|
|
while(max-- && (MCI_COMMAND & (1<<31))) ;
|
|
|
|
(*(volatile unsigned long *) (SD_BASE+0x64)) = 0xfffff;
|
|
|
|
(*(volatile unsigned long *) (SD_BASE+0x4c)) = ~0x7fff0fff; // interrupt mask ?
|
|
(*(volatile unsigned long *) (SD_BASE+0x4c)) |= 0x503f0080;
|
|
|
|
MCI_MASK = 0xffffbffe;
|
|
}
|
|
|
|
int sd_init(void)
|
|
{
|
|
int ret;
|
|
CGU_PERI |= CGU_MCI_CLOCK_ENABLE;
|
|
|
|
CGU_IDE = (1<<7) /* AHB interface enable */ |
|
|
(1<<6) /* interface enable */ |
|
|
((CLK_DIV(AS3525_PLLA_FREQ, AS3525_IDE_FREQ) - 1) << 2) |
|
|
1; /* clock source = PLLA */
|
|
|
|
CGU_MEMSTICK = (1<<8) | (1<<7) |
|
|
(CLK_DIV(AS3525_PLLA_FREQ, AS3525_MS_FREQ) -1) | 1;
|
|
|
|
/* ?? */
|
|
*(volatile int*)0xC80F003C = (1<<7) |
|
|
(CLK_DIV(AS3525_PLLA_FREQ, 24000000) -1) | 1;
|
|
|
|
wakeup_init(&transfer_completion_signal);
|
|
|
|
VIC_INT_ENABLE |= INTERRUPT_NAND;
|
|
|
|
init_controller();
|
|
ret = sd_init_card();
|
|
if(ret < 0)
|
|
return ret;
|
|
|
|
/* init mutex */
|
|
mutex_init(&sd_mtx);
|
|
|
|
queue_init(&sd_queue, true);
|
|
create_thread(sd_thread, sd_stack, sizeof(sd_stack), 0,
|
|
sd_thread_name IF_PRIO(, PRIORITY_USER_INTERFACE) IF_COP(, CPU));
|
|
|
|
#ifndef BOOTLOADER
|
|
sd_enabled = true;
|
|
sd_enable(false);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#ifdef STORAGE_GET_INFO
|
|
void sd_get_info(struct storage_info *info)
|
|
{
|
|
info->sector_size=card_info.blocksize;
|
|
info->num_sectors=card_info.numblocks;
|
|
info->vendor="Rockbox";
|
|
info->product = "Internal Storage";
|
|
info->revision="0.00";
|
|
}
|
|
#endif
|
|
|
|
static int sd_wait_for_state(unsigned int state)
|
|
{
|
|
unsigned long response;
|
|
unsigned int timeout = 100; /* ticks */
|
|
long t = current_tick;
|
|
|
|
while (1)
|
|
{
|
|
long tick;
|
|
|
|
if(!send_cmd(SD_SEND_STATUS, card_info.rca,
|
|
MCI_RESP, &response))
|
|
return -1;
|
|
|
|
if (((response >> 9) & 0xf) == state)
|
|
return 0;
|
|
|
|
if(TIME_AFTER(current_tick, t + timeout))
|
|
return -10 * ((response >> 9) & 0xf);
|
|
|
|
if (TIME_AFTER((tick = current_tick), next_yield))
|
|
{
|
|
yield();
|
|
timeout += current_tick - tick;
|
|
next_yield = tick + MIN_YIELD_PERIOD;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int sd_transfer_sectors(unsigned long start, int count, void* buf, bool write)
|
|
{
|
|
int ret = 0;
|
|
|
|
if((int)buf & 3)
|
|
panicf("unaligned transfer");
|
|
|
|
/* skip SanDisk OF */
|
|
start += 0xf000;
|
|
|
|
mutex_lock(&sd_mtx);
|
|
#ifndef BOOTLOADER
|
|
sd_enable(true);
|
|
#endif
|
|
|
|
if (card_info.initialized <= 0)
|
|
{
|
|
ret = sd_init_card();
|
|
if (!(card_info.initialized))
|
|
{
|
|
panicf("card not initialised (%d)", ret);
|
|
goto sd_transfer_error;
|
|
}
|
|
}
|
|
|
|
last_disk_activity = current_tick;
|
|
ret = sd_wait_for_state(SD_TRAN);
|
|
if (ret < 0)
|
|
{
|
|
static const char *st[9] = {
|
|
"IDLE", "RDY", "IDENT", "STBY", "TRAN", "DATA", "RCV", "PRG", "DIS"
|
|
};
|
|
if(ret <= -10)
|
|
panicf("wait for state failed (%s)", st[(-ret / 10) % 9]);
|
|
else
|
|
panicf("wait for state failed");
|
|
goto sd_transfer_error;
|
|
}
|
|
|
|
dma_retain();
|
|
|
|
while(count)
|
|
{
|
|
/* Interrupt handler might set this to true during transfer */
|
|
retry = false;
|
|
/* 128 * 512 = 2^16, and doesn't fit in the 16 bits of DATA_LENGTH
|
|
* register, so we have to transfer maximum 127 sectors at a time. */
|
|
//unsigned int transfer = (count >= 128) ? 127 : count; /* sectors */
|
|
unsigned int transfer = count;
|
|
|
|
const int cmd =
|
|
write ? SD_WRITE_MULTIPLE_BLOCK : SD_READ_MULTIPLE_BLOCK;
|
|
|
|
(*(volatile unsigned long *) (SD_BASE+0x00)) |= 2;
|
|
while(( *(volatile unsigned long *) (SD_BASE+0x00)) & 2) ;
|
|
|
|
//(*(volatile unsigned long *) (SD_BASE+0x1c)) = 512;
|
|
(*(volatile unsigned long *) (SD_BASE+0x20)) = transfer * 512;
|
|
|
|
(*(volatile unsigned long *) (SD_BASE+0x00)) |= 2;
|
|
while(( *(volatile unsigned long *) (SD_BASE+0x00)) & 2) ;
|
|
|
|
(*(volatile unsigned long *) (SD_BASE+0x4c)) &= ~0x7fff0fff;
|
|
|
|
if(0)
|
|
{
|
|
(*(volatile unsigned long *) (SD_BASE+0x00)) |= 0x20;
|
|
MCI_MASK = 0xBE8C;
|
|
(*(volatile unsigned long *) (SD_BASE+0x4c)) |= 0x503f0080;
|
|
}
|
|
else
|
|
{
|
|
MCI_MASK = 0xBEB8;
|
|
(*(volatile unsigned long *) (SD_BASE+0x4c)) |= 0x3f0030;
|
|
}
|
|
|
|
if(card_info.ocr & (1<<30) ) /* SDHC */
|
|
ret = send_cmd(cmd, start, MCI_NO_RESP, NULL);
|
|
else
|
|
ret = send_cmd(cmd, start * SD_BLOCK_SIZE,
|
|
MCI_NO_RESP, NULL);
|
|
|
|
if (ret < 0)
|
|
panicf("transfer multiple blocks failed (%d)", ret);
|
|
|
|
if(write)
|
|
dma_enable_channel(0, buf, MCI_FIFO, DMA_PERI_SD,
|
|
DMAC_FLOWCTRL_PERI_MEM_TO_PERI, true, false, 0, DMA_S8, NULL);
|
|
else
|
|
dma_enable_channel(0, MCI_FIFO, buf, DMA_PERI_SD,
|
|
DMAC_FLOWCTRL_PERI_PERI_TO_MEM, false, true, 0, DMA_S8, NULL);
|
|
|
|
line = 0;
|
|
lcd_clear_display();
|
|
printf("dma ->");
|
|
|
|
wakeup_wait(&transfer_completion_signal, TIMEOUT_BLOCK);
|
|
|
|
printf("dma <-");
|
|
int delay = 0x1000000; while(delay--) ;
|
|
|
|
if(!retry)
|
|
{
|
|
buf += transfer * SECTOR_SIZE;
|
|
start += transfer;
|
|
count -= transfer;
|
|
}
|
|
|
|
last_disk_activity = current_tick;
|
|
|
|
if(!send_cmd(SD_STOP_TRANSMISSION, 0, MCI_NO_RESP, NULL))
|
|
{
|
|
ret = -666;
|
|
panicf("STOP TRANSMISSION failed");
|
|
goto sd_transfer_error;
|
|
}
|
|
|
|
ret = sd_wait_for_state(SD_TRAN);
|
|
if (ret < 0)
|
|
{
|
|
panicf(" wait for state TRAN failed (%d)", ret);
|
|
goto sd_transfer_error;
|
|
}
|
|
}
|
|
|
|
dma_release();
|
|
|
|
#ifndef BOOTLOADER
|
|
sd_enable(false);
|
|
#endif
|
|
mutex_unlock(&sd_mtx);
|
|
return 0;
|
|
|
|
sd_transfer_error:
|
|
panicf("transfer error : %d",ret);
|
|
card_info.initialized = 0;
|
|
return ret;
|
|
}
|
|
|
|
int sd_read_sectors(unsigned long start, int count, void* buf)
|
|
{
|
|
return sd_transfer_sectors(start, count, buf, false);
|
|
}
|
|
|
|
int sd_write_sectors(unsigned long start, int count, const void* buf)
|
|
{
|
|
#if defined(BOOTLOADER) /* we don't need write support in bootloader */
|
|
(void) start;
|
|
(void) count;
|
|
(void) buf;
|
|
return -1;
|
|
#else
|
|
return sd_transfer_sectors(start, count, (void*)buf, true);
|
|
#endif
|
|
}
|
|
|
|
#ifndef BOOTLOADER
|
|
long sd_last_disk_activity(void)
|
|
{
|
|
return last_disk_activity;
|
|
}
|
|
|
|
void sd_enable(bool on)
|
|
{
|
|
/* TODO */
|
|
(void)on;
|
|
return;
|
|
}
|
|
|
|
tCardInfo *card_get_info_target(int card_no)
|
|
{
|
|
(void)card_no;
|
|
return &card_info;
|
|
}
|
|
|
|
#endif /* BOOTLOADER */
|