Christian Gmeiner b9c9ca6290 fix red ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16325 a1c6a512-1295-4272-9138-f99709370657		2008-02-17 15:32:26 +00:00
..
archos/av300
imx31	Oops. Tiny goof.	2008-02-09 08:05:01 +00:00
ipod	Revert LCD changes - make sure the backlight remains on as a visible sign that the unit has powered off	2008-02-14 20:48:17 +00:00
iriver	H10-20GB: Commit the first patch in FS#8533 to fix the mpegplayer display problem where only half the data was reaching the display on some players. Two individuals report that it corrects it.	2008-02-01 02:02:38 +00:00
olympus/mrobe-100	mrobe 100: (1) device reset in system_init is same as H10. (2) make power_off actually work.	2008-02-03 00:04:02 +00:00
pnx0101
s3c2440	Fix the red.	2008-02-13 05:49:48 +00:00
sandisk	Some misc. ATA stuff: Increase threads' priority (important for idle callbacks to get done faster). Use a simpler loop for ata thread. Add a balancing mutex_lock call to ata_init (oops).	2008-02-11 07:42:11 +00:00
tatung/tpj1022
tcc77x
tcc780x	a very basic power_off function	2008-02-16 13:01:30 +00:00
tms320dm320	Finally, out goes struct spinlock for anything but mutiprocessor targets where it becomes a reenterable corelock.	2008-01-18 13:12:33 +00:00
adc-pp5020.c	make mrobe100 work again	2008-02-10 16:06:01 +00:00
ata-as-arm.S
ata-pp5002.c
ata-pp5020.c
ata-target.h
audio-pp.c
crt0-pp-bl.S	Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.	2007-11-27 01:20:26 +00:00
crt0-pp.S	Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.	2007-11-27 01:20:26 +00:00
debug-pp.c	fix red	2008-02-17 15:32:26 +00:00
debug-target.h	fix red	2008-02-17 15:32:26 +00:00
i2c-pp.c
i2c-telechips.c	Initial Cowon D2 commit:	2008-01-14 22:04:48 +00:00
i2s-pp.c
lcd-as-memframe.S
memcpy-arm.S
memmove-arm.S
memset-arm.S
memset16-arm.S
mmu-arm.c
mmu-arm.h
pcm-pp.c	audio on the m:robe 100	2008-01-20 12:59:23 +00:00
system-arm.h
system-pp502x.c	Commit FS#8379 by Andree Buschmann. Disables much of the remaining unneeded hardware on PP50xx targets (Ipods, Sansa, H10s, etc) resulting in a large savings in power and consequent increase in battery life. Results vary from target to target and from codec to codec, but we now approach the OF runtime on several PP devices. For now, leave base CPU clock at 30MHz, although further savings is possible with some codecs if clock is reduced. Additionally, fix battery capacity on c200 and use my measurements to improve runtime estimation for Sandisk targets.	2008-02-10 05:39:20 +00:00
system-pp5002.c	Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.	2007-11-27 01:20:26 +00:00
system-target.h	Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.	2007-11-27 01:20:26 +00:00
usb-drv-pp502x.c	Major USB fixes by Frank Gevaerts. Still disabled in builds, #define USE_ROCKBOX_USB to test.	2008-02-11 14:26:25 +00:00
usb-fw-pp502x.c	Major USB fixes by Frank Gevaerts. Still disabled in builds, #define USE_ROCKBOX_USB to test.	2008-02-11 14:26:25 +00:00
usb-fw-pp5002.c
usb-target.h
wmcodec-pp.c	Commit FS#8379 by Andree Buschmann. Disables much of the remaining unneeded hardware on PP50xx targets (Ipods, Sansa, H10s, etc) resulting in a large savings in power and consequent increase in battery life. Results vary from target to target and from codec to codec, but we now approach the OF runtime on several PP devices. For now, leave base CPU clock at 30MHz, although further savings is possible with some codecs if clock is reduced. Additionally, fix battery capacity on c200 and use my measurements to improve runtime estimation for Sandisk targets.	2008-02-10 05:39:20 +00:00
wmcodec-telechips.c	Initial Cowon D2 commit:	2008-01-14 22:04:48 +00:00